ITI trade Draughtsman (Mech.) is powered by NCVT.  ITI trade Draughtsman (Mech.)  is a job oriented trade ITI trade Draughtsman (Mech.) is suitable for government job and private job. This ITI trade Draughtsman (Mech.) is very powerful for self-empowerment. This ITI trade Draughtsman (Mech.) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:

• Mechanical Draughtsman, Tracer, Designer of mechanical parts in Production & Manufacturing industries.
• In Infrastructure and defence organizations.
• In public sector industries and private industries in India & abroad.
• Draughtsman Mechanical have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.

 International Comparability

• 1. Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
• 2. However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

 Progression Pathway

1. Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
2. Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC)
3. Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor
4. can become supervisor after doing diploma in relevant branch of Engineering

ITI trade Electrician is powered by NCVT.  ITI trade Electrician  is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

• Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. 
•  After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board. 
• They can set up their own Rewinding and servicing of Domestic Equipment shop.  
• Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various  Industries etc
• They can also go for further higher studies after successful completion of course.
• Students who have completed this course have found employment in the following areas:
• Service/Maintenance Technician for domestic appliances in Reputed Companies
• Winder of Electrical Motors in winding shop
• Contractor for domestic wiring and industrial wiring
• Armature winder of Electrical fans and motors
• Electrical appliance repair in electrical shops
• Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
• Local Electricity Board
• Assembler of Electrical control Gears
• Telephone Department
• Installation and Testing division of Auditorium and Cinema Hall
• Factories
• As Instructor in Govt./Private ITI/ITC
• Merchant Navy
• Indian Air Force
• Self-Employment in Service Centre

ITI trade Fitter is powered by NCVT.  ITI trade Fitter  is a job oriented trade ITI trade Fitter is suitable for government job and private job. This ITI trade Fitter is very powerful for self-empowerment. This ITI trade Fitter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Fitters have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the following industries:

• Production & Manufacturing industries.
• Structural Fabrication like bridges, Roof structures, Building & construction.
• Automobile and allied industries
• Service industries like road transportation and Railways.
• Ship building and repair
• Infrastructure and defence organizations
• In public sector industries like BHEL, BEML, NTPC, etc and private industries in India & abroad.
• Self employment

International Comparability

• Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
• However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.
   

Progression Pathway

• Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
• Can take admission in diploma course in notified branches of Engineering by lateral entry
• Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering
• Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
• Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

ITI trade Instrument Mechanic is powered by NCVT.  ITI trade Instrument Mechanic  is a job oriented trade ITI trade Instrument Mechanic is suitable for government job and private job. This ITI trade Instrument Mechanic is very powerful for self-empowerment. This ITI trade Instrument Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic Precision Instrument, General; tests, repairs, overhauls and assembles various precision instruments and their parts for efficient performance. Examines instrument for defects. Dismantles components and cleans them in appropriate fluid such as petrol, kerosene etc. to find out extent of damage or wear and tear to parts. Removes minor defects of parts by grinding, filing, drilling, etc. and replaces worn out and damaged parts. Adjusts position of various parts using screwdriver, spanner etc. and assembles instrument to form complete unit. Makes simple electrical connections, solders contact points and performs other tasks as necessary. Tests performance either by visual observation or by conducting simple electrical and mechanical tests and ensures that repaired or assembled instrument conforms to prescribed efficiency. May make new components and assemble new instruments. May specialize in any particular type of instrument like mechanical, hydraulic, pneumatic, electrical, optical, orthopedic etc.

Technician Instrumentation; dismantles removes and replaces a range of instruments and faulty peripheral components down to unit and component level, setting up test equipment, troubleshooting components of instruments, calibrating them and also preparing service reports and accurately documenting parts replacement and repair.

Mechanic Precision Instrument, Mechanical; makes, alters and adjusts mechanical instruments or mechanical parts of electrical and optical instruments by accurate milling, filing, grinding, lapping and other processes. Studies drawings or samples and examines precision instrument like balance, meters, pressure gauges etc. for defects. Dismantles instrument, cleans metal components in petrol, kerosene oil or otherwise and checks them to find out extent of damage and further serviceability. Makes new parts on lathe milling or other machines, if necessary. Sizes and fits metal parts by filing, scraping, grinding lapping etc. as necessary and ensures their desired accuracy by checking with precision measuring instruments shadow graph and other highly perfect devices. Assembles parts to form complete unit. Gets electrical components repaired by Electrician. Fits electrical and optical parts to instrument and adjusts them as required. Texts repaired or assembled instrument for clarity or vision sensitivity, correct meter and scale readings etc. as required and ensures stipulated performance within prescribed limits. Makes necessary adjustments and seals meters to avoid manipulations. May specialize in particular type of instruments like balance, pressure gauges, meters, the odolites etc. May make new instruments from blue prints.

Functional Tester; is responsible for checking functions of manufactured industrial equipment such as UPS, inverter, energy meter, PLC, oscilloscope, control panel. The individual at work tests specified functions of every product being assembled on the production line.

ITI trade Mechanic (Motor Vehicle) is powered by NCVT.  ITI trade Mechanic (Motor Vehicle)  is a job oriented trade ITI trade Mechanic (Motor Vehicle) is suitable for government job and private job. This ITI trade Mechanic (Motor Vehicle) is very powerful for self-empowerment. This ITI trade Mechanic (Motor Vehicle) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Installs, tests, maintains, repairs and replaces electrical Power distribution/power line equipments and fittings in factories, workshops, power house, business and residential premises etc. Manipulates controls to adjust and activate those equipments. Monitors and records control board/room readings, examines faults in control room and repairs substation equipments and panels to ensure proper operational efficiency.   
Mechanic Motor Vehicle (MMV) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

• Motor Vehicle Mechanics, Other 
• Mechanic, Automobile 
• Maintenance Technician – Service 
• Workshop 
• Auto Service Technician – Mechanic 
• Fitter Automobile
   

ITI trade Mechanic Auto Electrical and Electronics is powered by NCVT.  ITI trade Mechanic Auto Electrical and Electronics  is a job oriented trade ITI trade Mechanic Auto Electrical and Electronics is suitable for government job and private job. This ITI trade Mechanic Auto Electrical and Electronics is very powerful for self-empowerment. This ITI trade Mechanic Auto Electrical and Electronics is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion of the above course, the trainee shall be able to perform the following skills with proper sequence.

Installs, repairs replaces and overhauls wiring, starters, generators, distributors and other electrical equipment of motor vehicles.

• Examines vehicle battery, checks voltage and specific gravity using special equipment such as voltmeter hydrometer, heavy discharge tester, etc. and ensures that battery is in good condition.
• Checks vehicle wiring, locates faults and rectifies defects by replacing damaged wire or connecting ends with insulation tape.
• Starts engine to check whether alternator is charging correctly, and if distributor, condenser coil and cut out are functioning properly.
• Estimates nature of defects and reports components to be replaced or repaired.
• Dismantles and repairs electrical units and components such s generator, distributor etc. where required.
• Replaces repaired kit or unit in vehicle and connects it with battery.
• Conducts thorough examination of various electrical fittings such as lights, panel indicators, fuel pumps, etc and rectifies defects.
• Checks condition and makes necessary adjustments. May do armature winding. May drive vehicles on road. May charge batteries.
• Fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use.
• Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; Installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment;
• Dismantles equipment if required and replaces faulty parts or wiring

ITI trade Plastic Processing Operator is powered by NCVT. ITI trade Plastic Processing Operator is a job oriented trade ITI trade Plastic Processing Operator is suitable for government job and private job. This ITI trade Plastic Processing Operator is very powerful for self-empowerment. This ITI trade Plastic Processing Operator is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The Plastic Processing Operator trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one-year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while Core area (Workshop Calculation & science, Engineering Drawing and Employability Skills) impart requisite core skill, knowledge and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Plastic Processing Operator has a wide scope of Employability ranging from selfemployment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

• Supervisor and Foreman, Plastic
• Products Making
• Plastic Moulding Shop Supervisor
• Plastic Moulding Technician or Operator
• Moulder, Hand (Plastic)
• Plastic Products Making Operatives, Other

JOB ROLE

Supervisor and Foreman, Plastic Products Making; supervises various plastics product manufacturing processes and ensures proper use of men and materials. Studies specifications, arranges for materials, tools and equipment and guides setting of machines, tools, die, moulds, etc., according to type of article to be made. Gets trial piece made, checks it for dimensions, form and composition and makes alterations if necessary to ensure conformation to prescribed specifications. Supervises machine and other manufacturing processes such as extruding, moulding, injecting of material, etc. and ensures correct production. Maintains necessary records, ensures proper use of men and material and develops methods to minimise wastage. May conduct running repairs of machines and equipment to keep them in working condition.

Plastic Moulding Shop Supervisor; is responsible for supervising the PVC moulding and extrusion activities to create well formed PVC parts for automobile components, maintaining process parameters, conducting quality checks on output product, deploying manpower as per requirement, guiding operatives and technicians to complete the assigned task, maintaining a safe and healthy working environment on the shop floor and maintaining records related to production, rejections, material movement and manpower productivity for a line/shift

Plastic Moulding Technician or Operator; manages the specifications of the plastic and its granules, setting up and operating the moulding machinery and forming and finishing the output.

Moulder, Hand (Plastic); moulds plastics sheets into desired shapes in hand moulding press. Studies specifications for moulded product and assembles mould. Determines weight of charge, pressure, temperature and curing time for moulding; collects plastic sheets, cuts them to required size and heats them on electrically operated heater to soften for moulding; removes sheet when sufficiently heated and places it in female of wooden mould, fixes wooden slab ofmould to keep sheet in position and inserts male block of mould; sets mould in hand press and manipulates controls to compress material and form material to shape of mould; removes moulded plastics object after specified time-interval by opening mould; examines and gaugesproduct for conformity to plant or customer standards. May make minor adjustments in moulding procedure to eliminate defects, and remould product.

Plastic Products Making Operatives, Other; perform number of routine and low skilled tasks in manufacturing plastics products, such as arranging and loading plastics or plastics impregnated sheets, assisting Printing Machine Operator, cleaning and finishing moulded plastics products etc. and are designated as: Laminating Press Helper (Plastics) if assists Laminating Press Operator by counting sheets of resin impregnated wood, fabric, paper, or other materials, by wiping surface of metal plates with cloth and special solution to prevent sticking, and by stacking sheets between plain or engraved plates.

ITI trade Sheet Metal Worker is powered by NCVT.  ITI trade Sheet Metal Worker  is a job oriented trade ITI trade Sheet Metal Worker is suitable for government job and private job. This ITI trade Sheet Metal Worker is very powerful for self-empowerment. This ITI trade Sheet Metal Worker is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

SHEET METAL WORKER has a wide scope of Employability ranging from selfemployment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

 Sheet Metal Worker, General/Sheet Metal Worker – Hand Tools and Manually Operated Machines
 

ITI trade Turner is powered by NCVT.  ITI trade Turner  is a job oriented trade ITI trade Turner is suitable for government job and private job. This ITI trade Turner is very powerful for self-empowerment. This ITI trade Turner is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion the passed out trainee

• 1.  Can work in the industry as skilled turner.
• 2. Can work in the field of basic fitting, lathe, drilling, Inspection & measurement observing safety precautions.
• 3.  Can perform all the turning operations on lathe & perform simple programming & operations on a CNC lathe.
• 4. Can handle different type of Fire extinguishers & personal protective equipment.

ITI trade Wireman is powered by NCVT.  ITI trade Wireman  is a job oriented trade ITI trade Wireman is suitable for government job and private job. This ITI trade Wireman is very powerful for self-empowerment. This ITI trade Wireman is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Wireman, Light and Power installs various kinds of electrical wiring such as cleat, conduit, casing, concealed etc. in houses, factories, workshops and other establishments for light and power supply. Studies diagram and plan of wiring and marks light, power and other points accordingly. Fixes wooden pegs, sizes tubes, saws casings, etc. by common carpentry fitting and other processes, according to type of wiring needed. Erects switch boards and fixes switch box casings cleats, conduits ceiling roses, switches, meters etc. according to type and plan of wiring. Draws wire in two way or three-way wiring system as prescribed and makes electrical connections through plugs and switches to different points exercising great care for safety and avoiding short circuit and earthing at any stage of wiring. Fixes fuses and covers as per diagram and insulates all naked wires at diversions and junctions to eliminate chances of short circuit and earthing. Fits light brackets, holders, shades, tube and mercury lights, fans etc, and makes electrical connection as necessary. Tests checks installed wiring for leakage and continuity using megger, removes faults if any and certifies wiring as correct for connecting mains. Checks existing wiring for defects and restores current supply by replacing defective switches, plug sockets, blown fuse etc. or removing short circuits and faulty wiring as necessary. May repair simple electrical domestic appliances. 

Electrical wiring works such as cleat, conduit, casing, concealed etc. in houses, factories, workshops and other establishments for light and power supply.