Govt. Industrial Training Institute Kalali Balali

get iti website @ 1800/-

 

 

Govt. Industrial Training Institute Kalali Balali is situated in Charkhi Dadri Haryana. Govt. Industrial Training Institute Kalali Balali is Industrial Training Institute under NCVT Govt. Industrial Training Institute Kalali Balali.

Institute Type: 

Government ITI

Government ITI is leading educational organisatin in india. Teching facualty of Government ITI is suprimo. ITI is  providing latest Job oriened cource for student. This Government ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme .

Estd: 
01-Jan-2009
ITI code: 
GR06000352
Contact No: 
9416020683
Address: 
Near Bus Stand Charkhi Dadri Raod,
Haryana District: 
Pin Code: 
127306
State: 
Haryana
State: 

Haryana

The Department of Skill Development and Industrial Training, Haryana is imparting skill based training to the unemployed youth of state through the network of 172 Govt. Industrial Training Institutes (139 (Co-Ed.) GITIs and 33 GITIs for Women) and 246 Private ITIs under Craftsman Training Scheme. Engineering & Non- Engineering trade courses of one and two years duration are being run in these institutes. During the current academic year 2019-20, 57328 sanctioned seats in 2610 trade units have been released for admission in GITIs and 34388 sanctioned seats in 1593 trade units have been released for admission in private ITIs.  65627 (47386 in GITI's and 18241 in PITI's) Trainees admitted to Govt. & Pvt. ITI's during session 2019-20.

In the year 1966, when Haryana came into being, there was 48 Govt. Industrial Training Institutes with the seating capacity of 7156. Now, there are total 418 Govt. & Pvt. Industrial Training Institutes with 91716 sanctioned seats offering courses in 80 different trades. Quality of training in ITIs is being upgraded regularly by improvement in curriculum, training methodology and training of trainers through industry sector council at Govt. of India. New trades are also being introduced as per market demand.

Reff: http://itiharyana.gov.in/

Trade: 

Computer Operator and Programming Assistant (COPA)

Computer Operator and Programming Assistant
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Computer Operator and Programming Assistant (COPA) is powered by NCVT.  ITI trade Computer Operator and Programming Assistant (COPA)  is a job oriented trade ITI trade Computer Operator and Programming Assistant (COPA) is suitable for government job and private job. This ITI trade Computer Operator and Programming Assistant (COPA) is very powerful for self-empowerment. This ITI trade Computer Operator and Programming Assistant (COPA) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The individual can work as both Computer Operator/ Programming Assistant; operates computer and peripheral equipment to process business, scientific, engineering, or other data, according to operating instructions. As programming assistant installs, maintains and updates computer programs by making minor changes and adjustments to them under the guidance of computing professionals. Maintains and updates documents of computer programs and installations with assistance under supervision of supervisor 

On successful completion of this course the candidates shall be gainfully employed as:

  • Computer Operator 
  • Programming Assistant
     

 

Dress Making

ITI trade Dressmaking
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Dress Making is powered by NCVT.  ITI trade Dress Making  is a job oriented trade ITI trade Dress Making is suitable for government job and private job. This ITI trade Dress Making is very powerful for self-empowerment. This ITI trade Dress Making is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Dress Making’ constructs dresses for children (Yoke Frock), dresses for teenagers, ladies dress, ladies suit, ladies night wear, ladies blouse, gents shirt, and gents trouser, according the sketched designs and blocks using adaptation/draping and manipulation techniques. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, and Assistant Production Merchandiser 

The qualification gives access to jobs such as Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, Assistant Production Merchandiser.

This qualification will enable the trainee to find employment as a skilled worker to perform jobs in the Dress Making field

Dressmaking

ITI trade Dressmaking
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Dressmaking is powered by NCVT.  ITI trade Dressmaking  is a job oriented trade ITI trade Dressmaking is suitable for government job and private job. This ITI trade Dressmaking is very powerful for self-empowerment. This ITI trade Dressmaking is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Dress Making’ constructs dresses for children (Yoke Frock), dresses for teenagers, ladies dress, ladies suit, ladies night wear, ladies blouse, gents shirt, and gents trouser, according the sketched designs and blocks using adaptation/draping and manipulation techniques. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, and Assistant Production Merchandiser 

The qualification gives access to jobs such as Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, Assistant Production Merchandiser.

This qualification will enable the trainee to find employment as a skilled worker to perform jobs in the Dress Making field

Electrician

ITI trade Electrician
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Electrician is powered by NCVT.  ITI trade Electrician  is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

  • Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. 
  •  After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board. 
  • They can set up their own Rewinding and servicing of Domestic Equipment shop.  
  • Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various  Industries etc
  • They can also go for further higher studies after successful completion of course.
  • Students who have completed this course have found employment in the following areas:
  • Service/Maintenance Technician for domestic appliances in Reputed Companies
  • Winder of Electrical Motors in winding shop
  • Contractor for domestic wiring and industrial wiring
  • Armature winder of Electrical fans and motors
  • Electrical appliance repair in electrical shops
  • Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
  • Local Electricity Board
  • Assembler of Electrical control Gears
  • Telephone Department
  • Installation and Testing division of Auditorium and Cinema Hall
  • Factories
  • As Instructor in Govt./Private ITI/ITC
  • Merchant Navy
  • Indian Air Force
  • Self-Employment in Service Centre

Fitter

ITI trade Fitter
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Fitter is powered by NCVT.  ITI trade Fitter  is a job oriented trade ITI trade Fitter is suitable for government job and private job. This ITI trade Fitter is very powerful for self-empowerment. This ITI trade Fitter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Fitters have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the following industries:

  • Production & Manufacturing industries.
  • Structural Fabrication like bridges, Roof structures, Building & construction.
  • Automobile and allied industries
  • Service industries like road transportation and Railways.
  • Ship building and repair
  • Infrastructure and defence organizations
  • In public sector industries like BHEL, BEML, NTPC, etc and private industries in India & abroad.
  • Self employment

International Comparability

  • Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.
     

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Painter (General)

Painter (General)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Painter (General) is powered by NCVT.  ITI trade Painter (General)  is a job oriented trade ITI trade Painter (General) is suitable for government job and private job. This ITI trade Painter (General) is very powerful for self-empowerment. This ITI trade Painter (General) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The ‘Painter (General)’ trade under CTS is one of the popular newly designed courses. The course is of two years (04 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while Core area (Workshop Calculation & science, Engineering Drawing and Employability Skills) impart requisite core skill, knowledge and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Applies decorative or protective coats of paint, varnish, shellac, enamel, lacquer or other materials on exterior or interior surfaces, trimming and fixtures of glass, metal, wood, plaster concrete brick, building boards or other objects using suitable tools as per work requirement 
Painter (General) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.
On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Painter,
  • General

job roles

Painter, General applies decorative or protective coats of paint, varnish, shellac, enamel, lacquer or other materials on exterior or interior surfaces, trimming and fixtures of glass, metal, wood, plaster concrete brick, building boards or other objects using brush, spray gun, roller, stencils etc. Receives work order and selects correct type of paint materials with the consideration to suitability, durability, ease of application and estimated cost. Mixes pigments, oils and other ingredients to material where required by manual or mechanical mixing device using paddle or electric mixer to obtain desired colour, shade and consistency. Removes dirt, grease or rough spots and irregularities by scrapers, chemicals and abrasives and patches cracks and holes with putty or other filler. Covers surface with appropriate prime coat or sealer to have suitable surface or base for paint. Brushes, sprays or stencils one or more coats of material on surfaces. May finish or decorate surfaces by gilding, silvering or painting over stencils. May be designated according to object coated or material used. May mix paint with linseed oil, colouring matter of materials, labour, etc. May erect scaffolds to facilitate work.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Plumber

ITI trade Plumber
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Plumber is powered by NCVT.  ITI trade Plumber  is a job oriented trade ITI trade Plumber is suitable for government job and private job. This ITI trade Plumber is very powerful for self-empowerment. This ITI trade Plumber is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Plumber trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional - skills and knowledge, while Core area (Workshop Calculation science, Engineering Drawing and Employability Skills) imparts requisite core skills, knowledge and life skills. After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Plumber assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Responsible for installation, operation and repair of plumbing system used in housing, commercial and institutional setups, drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc., maintenance and servicing of pipes and sanitary fixtures. 

Plumber has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Plumber, General
  • Plumber, Operations
  • Plumber, General-Installation and Repair
  • Plumber, General Helper
  • Plumber, General Assistant
  • Plumber, Maintenance and Servicing Assistant
  • Plumber, Maintenance and Servicing
  • Pipe Layer/Plumber Pipeline
  • Pipe Fitter
  • Plumbers and Pipe Fitters, Other
  • Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant
  • Plumber (Welder) Assistant
  • Plumber (Pumps and E/M Mechanic)

JOB ROLE

Plumber, General; lays out, assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Receives instructions from Sanitary Engineer or Civil Engineer regarding lay out of pipes, gas or water mains, position of fixtures and fittings, etc. Examines drawings or other specifications regarding size and dimensions of area where sanitary fittings or pipe are to be fitted or laid. Marks points at places to indicate position for fixing brackets and laying pipes. Drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc. to keep or hold fittings and fixtures in position, using nuts, bolts, clamps etc. and tightens them with hand tools. Cuts reams, threads and bends pipes as appropriate. Ensures that pipe lines are laid properly by Pipe Fitter. Joins pipes with sockets, Tees, elbow etc. or with molten lead or lead wool. Caulks joints (operation of making joint seam tight to withstand pressure) and tests them for leaks with pneumatic or hydraulic pressure. May repair and maintain sewerage and pipe lines by replacing washers on leaky faucets, mending burst pipes, opening clogged drains, etc. May do lead burning, dressing and bossing of lead pipe and sheet lead, inlaying of wooden tanks, construction of septic tanks etc

Plumber, Operations; is responsible for operation of plumbing system used in housing, commercial and institutional setups.

Plumber, General-Installation and Repair; Plumber (General)-II is responsible for installation and repair plumbing systems including those of advanced sanitary fixtures as per manufacturer͛s specifications in housing, commercial and institutional setups.

Plumber, General Helper; is responsible for helping Plumber (General) by carrying and handling of tools and materials required in installation, minor repair and maintenance of plumbing systems.

Plumber, General Assistant; is responsible for assistance in, preliminary installation and minor repair work of basic plumbing systems in domestic, commercial and institutional setups.

Plumber, Maintenance and Servicing Assistant; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Plumber, Maintenance and Servicing; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Pipe Layer/Plumber Pipeline; Sewer Pipe Layer lays concrete, stone ware or clay pipes to form sanitary drains and sewers. Receives instructions regarding size and type of concrete, stone ware or clay pipe to be laid. Digs or gets earth dug along marked lines using spade, picks etc. to make trenches for laying pipes. Levels and smoothens bottom of trenches to proper gradient by scooping with shovels. Receives pipes of required size lowered into trench manually or by pulley and adjusts their position by hand or crow-bar for correct levelling and vertical and horizontal alignment. Joints pipes together using appropriate couplings, joints, rings etc. and closes joints by caulking with fibre and cement to prevent leakage. Tests joints by hydraulic or pneumatic pressure after sealing. Fills trench with earth to cover laid pipe and rams earth to avoid sinking. Is designated as PIPE LAYER WATERMAINS or WATER MAINS FITTER if engaged in laying cast iron or galvanized iron water pipe mains and in caulking their joints with lead to prevent leakage. May lay pipe lines to provide water connection to houses, sanitary sewers etc. May fix meters to stopcocks, remove defects from pipe lines and replace defective ones.

Pipe Fitter; lays, repairs and maintains, pipes for supply of water, gas, oil or steam in buildings, gardens, workshops, stores, ships etc., according to drawings or instructions. Examines drawings and other specifications or receives relevant instructions. Cuts passage holes for laying pipes in walls and floors. Cuts reams, threads and bends pipes according to specifications. Lays pipes in cut passage and assembles pipe sections with couplings, sockets, Tee's elbows etc. Levels position of pipes using sprit level for gravitational flow. Caulks joints, tests them for leakage with pneumatic or hydraulic pressure and secures pipe line to structure with clamps, brackets, and hangers. Fits water meters, taps etc. to pipe where necessary. Repairs and replaces leaky pipe lines, taps and joints and provides connections to overhead water tanks. Helps Plumber, General in fittings sanitary fittings to buildings. May join pipe sections and fittings.

Plumbers and Pipe Fitters, Other; perform number of routine and low skilled tasks such as assisting in laying pipes, making water tight joints, fitting sockets and reducers, threading pipes with taps and dies, removing leakages, etc., and are designated as Plumber Mate or Pipe Fitter Helper according to type of work done.

Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant; is responsible for welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Welder) Assistant; is responsible for assistance in welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Pumps and E/M Mechanic); is responsible for installation and repair of Pumps and E/M equipment used for different plumbing applications of housing, commercial and institutional Set ups.

Turner

ITI trade Turner
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Turner is powered by NCVT.  ITI trade Turner  is a job oriented trade ITI trade Turner is suitable for government job and private job. This ITI trade Turner is very powerful for self-empowerment. This ITI trade Turner is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion the passed out trainee

  • 1.  Can work in the industry as skilled turner.
  • 2. Can work in the field of basic fitting, lathe, drilling, Inspection & measurement observing safety precautions.
  • 3.  Can perform all the turning operations on lathe & perform simple programming & operations on a CNC lathe.
  • 4. Can handle different type of Fire extinguishers & personal protective equipment.

Welder

ITI trade Welder
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Welder is powered by NCVT.  ITI trade Welder  is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc

Map: 

ITI Student Resume Portal

रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं

ITI Student Resume

ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं

 

Search engine adsence