Govt. Industrial Training Institute, Kaithal

get iti website @ 1800/-

 

 

Govt. Industrial Training Institute, Kaithal is situated in Kaithal Haryana. Govt. Industrial Training Institute, Kaithal is Industrial Training Institute under NCVT Govt. Industrial Training Institute, Kaithal.

Institute Type: 

Government ITI

Government ITI is leading educational organisatin in india. Teching facualty of Government ITI is suprimo. ITI is  providing latest Job oriened cource for student. This Government ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme .

Estd: 
01-Jan-1963
ITI code: 
GU06000013
Contact No: 
1746222210
Address: 
Kaithal
Haryana District: 
Pin Code: 
136027
State: 
Haryana
State: 

Haryana

The Department of Skill Development and Industrial Training, Haryana is imparting skill based training to the unemployed youth of state through the network of 172 Govt. Industrial Training Institutes (139 (Co-Ed.) GITIs and 33 GITIs for Women) and 246 Private ITIs under Craftsman Training Scheme. Engineering & Non- Engineering trade courses of one and two years duration are being run in these institutes. During the current academic year 2019-20, 57328 sanctioned seats in 2610 trade units have been released for admission in GITIs and 34388 sanctioned seats in 1593 trade units have been released for admission in private ITIs.  65627 (47386 in GITI's and 18241 in PITI's) Trainees admitted to Govt. & Pvt. ITI's during session 2019-20.

In the year 1966, when Haryana came into being, there was 48 Govt. Industrial Training Institutes with the seating capacity of 7156. Now, there are total 418 Govt. & Pvt. Industrial Training Institutes with 91716 sanctioned seats offering courses in 80 different trades. Quality of training in ITIs is being upgraded regularly by improvement in curriculum, training methodology and training of trainers through industry sector council at Govt. of India. New trades are also being introduced as per market demand.

Reff: http://itiharyana.gov.in/

Trade: 

Carpenter

ITI trade Carpenter
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Carpenter is powered by NCVT.  ITI trade Carpenter  is a job oriented trade ITI trade Carpenter is suitable for government job and private job. This ITI trade Carpenter is very powerful for self-empowerment. This ITI trade Carpenter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Carpenter has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Carpenter
  • Carpenter Construction

Computer Hardware & Network Maintenance

Computer Hardware & Network Maintenance
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Non Engineering

ITI trade Computer Hardware & Network Maintenance is powered by NCVT.  ITI trade Computer Hardware & Network Maintenance  is a job oriented trade ITI trade Computer Hardware & Network Maintenance is suitable for government job and private job. This ITI trade Computer Hardware & Network Maintenance is very powerful for self-empowerment. This ITI trade Computer Hardware & Network Maintenance is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Computer Hardware & Network Maintenance[Duration: 1 year, NSQF level-4]:

Course Content: Basics of electrical and electronic component related to hardware and networking system. Assembly and repair of desktop PC and laptops. Installation of different operating systems and all other application software, customization of OS, updating device driver, setting firewall security, junk file removal, data backup and data recovery techniques. Use of word, excel, power point. Install and work with Linux environment. Install and configure different types of printers, scanners and its troubleshooting. Study of various network devices like router, modems, switches, crimping and punching cables. Setting up and configuring network system, setting IP addressing techniques. Sharing and control of resources and internet connection over network. Creating Wi-Fi network. Networking security. Install and configure Windows and Linux server and add different roles. Use of Internet, send e-mails, etc

Skills Acquired: Computer System Hardware Analyst/Hardware Engineer: Plan layout and installation of new system or modification of existing system. Recommend and plan layout for type of computers and peripheral equipment, or modifications to existing equipment and system that will provide capability for proposed project or work load, efficient operation, and effective use of allotted space. Data entry into computer terminal to store, retrieve, and manipulate data for analysis of system capabilities and requirements. Specify power supply requirements and configuration. Recommend purchase of equipment to control dust, temperature, and humidity in area of system installation. Maintenance of Servers, desktops, scanners, printers and networking devices. CCTV surveillance system. Monitor functioning of equipment to ensure system operates in conformance with specifications.

Data Communication Analyst/Network Administrator: Research, test, evaluate and recommend data communication hardware and software. Identifies areas of operation which need upgraded equipment, such as modems, fiber optic cables and telephone wires. Conducts survey to determine user needs. Test and evaluate hardware and software to determine efficiency, reliability, and compatibility with existing system, using equipment such as computer terminal and modem. Analyze test data and recommend hardware or software for purchase. Monitors system performance. Train users in use of equipment. Assist users to identify and solve data communication problems. Writing technical specifications to send to vendors for bidding. Oversee or assist in the installation of communications hardware. Designing and creating network layout. Crimping and punching network cables. Installation of network rack. Configuring and installation of network devices like routers, modems, access points, switches, etc. Configuring Servers.

Options for employment: Technician for maintenance & servicing of different hardware and networking equipment’s, Assistant to System & Network Engineer, Supervisor in hardware assembly units, Sales person in hardware & networking, Faculty members or Lab Assistant in Computer Institute.

Options for self-employment / Entrepreneurship Development: To start a business in sales, service and maintenance of computer hardware, software and networking. To start a Computer Institute, setup and maintain a cyber cafe

Computer Operator and Programming Assistant (COPA)

Computer Operator and Programming Assistant
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Computer Operator and Programming Assistant (COPA) is powered by NCVT.  ITI trade Computer Operator and Programming Assistant (COPA)  is a job oriented trade ITI trade Computer Operator and Programming Assistant (COPA) is suitable for government job and private job. This ITI trade Computer Operator and Programming Assistant (COPA) is very powerful for self-empowerment. This ITI trade Computer Operator and Programming Assistant (COPA) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The individual can work as both Computer Operator/ Programming Assistant; operates computer and peripheral equipment to process business, scientific, engineering, or other data, according to operating instructions. As programming assistant installs, maintains and updates computer programs by making minor changes and adjustments to them under the guidance of computing professionals. Maintains and updates documents of computer programs and installations with assistance under supervision of supervisor 

On successful completion of this course the candidates shall be gainfully employed as:

  • Computer Operator 
  • Programming Assistant
     

 

Draughtsman (Civil)

ITI trade Draughtsman (Civil)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Draughtsman (Civil) is powered by NCVT.  ITI trade Draughtsman (Civil)  is a job oriented trade ITI trade Draughtsman (Civil) is suitable for government job and private job. This ITI trade Draughtsman (Civil) is very powerful for self-empowerment. This ITI trade Draughtsman (Civil) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

This course is meant for the candidates who aspire to become Civil Draughtsmen whose job roles include planning and drawing sketches of residential buildings from given data, preparing working drawings of all types of buildings from line sketches in CAD, Planning, drawing, estimating, and costing of civil work, drawing plans by using CAD, and making of 3D models of civil work. Giving setting out of site, supervision of civil work etc.

International Comparability

  • Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education.
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering after which they will be employed in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed preferably in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the trade for becoming instructor in ITIs.

Draughtsman (Mech.)

Draughtsman (Mech.)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Draughtsman (Mech.) is powered by NCVT.  ITI trade Draughtsman (Mech.)  is a job oriented trade ITI trade Draughtsman (Mech.) is suitable for government job and private job. This ITI trade Draughtsman (Mech.) is very powerful for self-empowerment. This ITI trade Draughtsman (Mech.) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:

  • Mechanical Draughtsman, Tracer, Designer of mechanical parts in Production & Manufacturing industries.
  • In Infrastructure and defence organizations.
  • In public sector industries and private industries in India & abroad.
  • Draughtsman Mechanical have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.

 International Comparability

  • 1. Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • 2. However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

 Progression Pathway

  1. Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  2. Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC)
  3. Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor
  4. can become supervisor after doing diploma in relevant branch of Engineering

Dress Making

ITI trade Dressmaking
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Dress Making is powered by NCVT.  ITI trade Dress Making  is a job oriented trade ITI trade Dress Making is suitable for government job and private job. This ITI trade Dress Making is very powerful for self-empowerment. This ITI trade Dress Making is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Dress Making’ constructs dresses for children (Yoke Frock), dresses for teenagers, ladies dress, ladies suit, ladies night wear, ladies blouse, gents shirt, and gents trouser, according the sketched designs and blocks using adaptation/draping and manipulation techniques. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, and Assistant Production Merchandiser 

The qualification gives access to jobs such as Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, Assistant Production Merchandiser.

This qualification will enable the trainee to find employment as a skilled worker to perform jobs in the Dress Making field

Dressmaking

ITI trade Dressmaking
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Dressmaking is powered by NCVT.  ITI trade Dressmaking  is a job oriented trade ITI trade Dressmaking is suitable for government job and private job. This ITI trade Dressmaking is very powerful for self-empowerment. This ITI trade Dressmaking is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Dress Making’ constructs dresses for children (Yoke Frock), dresses for teenagers, ladies dress, ladies suit, ladies night wear, ladies blouse, gents shirt, and gents trouser, according the sketched designs and blocks using adaptation/draping and manipulation techniques. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, and Assistant Production Merchandiser 

The qualification gives access to jobs such as Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, Assistant Production Merchandiser.

This qualification will enable the trainee to find employment as a skilled worker to perform jobs in the Dress Making field

Electrician

ITI trade Electrician
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Electrician is powered by NCVT.  ITI trade Electrician  is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

  • Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. 
  •  After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board. 
  • They can set up their own Rewinding and servicing of Domestic Equipment shop.  
  • Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various  Industries etc
  • They can also go for further higher studies after successful completion of course.
  • Students who have completed this course have found employment in the following areas:
  • Service/Maintenance Technician for domestic appliances in Reputed Companies
  • Winder of Electrical Motors in winding shop
  • Contractor for domestic wiring and industrial wiring
  • Armature winder of Electrical fans and motors
  • Electrical appliance repair in electrical shops
  • Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
  • Local Electricity Board
  • Assembler of Electrical control Gears
  • Telephone Department
  • Installation and Testing division of Auditorium and Cinema Hall
  • Factories
  • As Instructor in Govt./Private ITI/ITC
  • Merchant Navy
  • Indian Air Force
  • Self-Employment in Service Centre

Electronics Mechanic

ITI trade Electronics Mechanic
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Electronics Mechanic is powered by NCVT.  ITI trade Electronics Mechanic  is a job oriented trade ITI trade Electronics Mechanic is suitable for government job and private job. This ITI trade Electronics Mechanic is very powerful for self-empowerment. This ITI trade Electronics Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Brief description of job roles:

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis  or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics  Mechanic;  Electronic  Equipment  Mechanic  repairs  electronic  equipment,  such  as computers, industrial controls, transmitters, and telemetering control systems following blueprints and   manufacturer's   specifications   and   using   hand   tools   and   test   instruments.   Tests  faulty equipment  and  applies  knowledge  of  functional  operation  of  electronic  units  and  systems  to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Radio Technician (Radio Manufacturing) tests assembled radio sets with testing equipment to ensure that assembly soldering, frequency, performance, etc. are in accordance with prescribed standards. Places assembled radio set in position and visually examines it to ensure that position of components,  connections, soldering,  wiring,  etc.  are in order.  Switches  on and operates different knobs  to  check  calibration,  audibility  and  general  performance  of  set  by  varying  its  tone  and listening to various stations and frequencies. Tightens loose nuts and screws,  locates  faults,  replaces defective components and conducts necessary changes.  Approves  correctly  assembled sets for further processing and rejects defective ones for rectification. May tests sets at different stages of assembly. May service, repair and overhaul radio sets.

Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work  checks  the  installation  site,  understands  the  layout  requirement  as  per  design,  assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.

Optical  fibre  technician  is  responsible for  maintaining uptime and quality of the network segment (both   optical   media   and   equipment)   assigned   to   him   by   undertaking   periodic   preventive maintenance activities  and  ensuring  effective fault management in  case  of  fault occurrence.  He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF)  as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS repair Technician’, this is an  after  sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual  also  and  interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.

Television Installation Man installs and adjusts television receivers and antennas, using hand tools. Selects antenna according to type of set and location of transmitting station. Bolts cross arms and dipole elements in position to assemble antenna. Secures antenna in place with bracket and guy wires, observing insurance codes and local ordinances to protect installation  from  lighting  and other hazards. Drills and waterproofs holes in building to make passage for transmission line. Connects line between receiver and antenna and fastens it in place. Tunes receiver on all channels and adjusts  screws to obtain desired density, linearity, focus and size of picture. Orients antenna  and installs reflector to obtain strongest possible reception.

Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole,    using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools,  test equipment.

Television Service and Repairman repairs and adjusts radios and television receivers, using hand tools and electronic testing instruments. Tunes receiver on all channels and observes audio and video characteristics to locate source of trouble. Adjusts controls to obtain desired  density,  linearity, focus and size of picture. Examines chassis for defects. Tests voltages and resistance of circuits to isolate defect following schematic diagram and using voltmeter, oscilloscope, signal generator and other electronic testing instruments. Tests and changes tubes, solders loose connections and repairs or replaces defective parts, using hand tools and soldering iron. Repair radios and other audio equipment.

Television  Repair  Technician job role is applicable to both Television manufacturing facilities as  well as electronics service centres. This role pertains to rectify faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Fire Technology and Industrial Safety Management

Fire Technology and Industrial Safety Management
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System of Education or its equivalent
Trade Type: 
Non Engineering

ITI trade Fire Technology and Industrial Safety Management is powered by NCVT. ITI trade Fire Technology and Industrial Safety Management is a job oriented trade ITI trade Fire Technology and Industrial Safety Management is suitable for government job and private job. This ITI trade Fire Technology and Industrial Safety Management is very powerful for self-empowerment. This ITI trade Fire Technology and Industrial Safety Management is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Fire Technology and Industrial Safety Management inspects different structures to ensure compliance with central/state government laws and with approved plans, specifications and standards, or inspect fire prevention systems and investigate fire sites to determine cause of fire. 
Fire Technology and Industrial Safety Management has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations: 

  • Fire Fighters
  • Fire Inspector
     

Fitter

ITI trade Fitter
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Fitter is powered by NCVT.  ITI trade Fitter  is a job oriented trade ITI trade Fitter is suitable for government job and private job. This ITI trade Fitter is very powerful for self-empowerment. This ITI trade Fitter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Fitters have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the following industries:

  • Production & Manufacturing industries.
  • Structural Fabrication like bridges, Roof structures, Building & construction.
  • Automobile and allied industries
  • Service industries like road transportation and Railways.
  • Ship building and repair
  • Infrastructure and defence organizations
  • In public sector industries like BHEL, BEML, NTPC, etc and private industries in India & abroad.
  • Self employment

International Comparability

  • Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.
     

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Instrument Mechanic

ITI trade Instrument Mechanic
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Instrument Mechanic is powered by NCVT.  ITI trade Instrument Mechanic  is a job oriented trade ITI trade Instrument Mechanic is suitable for government job and private job. This ITI trade Instrument Mechanic is very powerful for self-empowerment. This ITI trade Instrument Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic Precision Instrument, General; tests, repairs, overhauls and assembles various precision instruments and their parts for efficient performance. Examines instrument for defects. Dismantles components and cleans them in appropriate fluid such as petrol, kerosene etc. to find out extent of damage or wear and tear to parts. Removes minor defects of parts by grinding, filing, drilling, etc. and replaces worn out and damaged parts. Adjusts position of various parts using screwdriver, spanner etc. and assembles instrument to form complete unit. Makes simple electrical connections, solders contact points and performs other tasks as necessary. Tests performance either by visual observation or by conducting simple electrical and mechanical tests and ensures that repaired or assembled instrument conforms to prescribed efficiency. May make new components and assemble new instruments. May specialize in any particular type of instrument like mechanical, hydraulic, pneumatic, electrical, optical, orthopedic etc.

Technician Instrumentation; dismantles removes and replaces a range of instruments and faulty peripheral components down to unit and component level, setting up test equipment, troubleshooting components of instruments, calibrating them and also preparing service reports and accurately documenting parts replacement and repair.

Mechanic Precision Instrument, Mechanical; makes, alters and adjusts mechanical instruments or mechanical parts of electrical and optical instruments by accurate milling, filing, grinding, lapping and other processes. Studies drawings or samples and examines precision instrument like balance, meters, pressure gauges etc. for defects. Dismantles instrument, cleans metal components in petrol, kerosene oil or otherwise and checks them to find out extent of damage and further serviceability. Makes new parts on lathe milling or other machines, if necessary. Sizes and fits metal parts by filing, scraping, grinding lapping etc. as necessary and ensures their desired accuracy by checking with precision measuring instruments shadow graph and other highly perfect devices. Assembles parts to form complete unit. Gets electrical components repaired by Electrician. Fits electrical and optical parts to instrument and adjusts them as required. Texts repaired or assembled instrument for clarity or vision sensitivity, correct meter and scale readings etc. as required and ensures stipulated performance within prescribed limits. Makes necessary adjustments and seals meters to avoid manipulations. May specialize in particular type of instruments like balance, pressure gauges, meters, the odolites etc. May make new instruments from blue prints.

Functional Tester; is responsible for checking functions of manufactured industrial equipment such as UPS, inverter, energy meter, PLC, oscilloscope, control panel. The individual at work tests specified functions of every product being assembled on the production line.

Machinist

ITI trade Machinist
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Machinist is powered by NCVT.  ITI trade Machinist  is a job oriented trade ITI trade Machinist is suitable for government job and private job. This ITI trade Machinist is very powerful for self-empowerment. This ITI trade Machinist is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:
• Machinist, Grinder, Operator of various types of power driven metal cutting or grinding machines in Production & Manufacturing industries,Infrastructure and defence organizations.
• Machinists have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.

International Comparability

  • 1. Comparison Made with German Syllabus and the proposed syllabus is in line with the existing German Syllabus (Around 95% contents are matching).
  • 2. However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can become supervisor after doing part-time diploma in relevant branch of Engineering.
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Machinist (Grinder)

Machinist (Grinder)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Machinist (Grinder) is powered by NCVT.  ITI trade Machinist (Grinder)  is a job oriented trade ITI trade Machinist (Grinder) is suitable for government job and private job. This ITI trade Machinist (Grinder) is very powerful for self-empowerment. This ITI trade Machinist (Grinder) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Machinist Grinder has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:
• Grinder, General
• Surface Grinder
• Roll Grinder
• Honer/Honing Machine Operator
• Lapper
• Grinder, Tool and Cutter
• In public sector and private industries in India & abroad.
• Self employment

International Comparability
1. Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
2. However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education.
  • Can take admission in diploma course in notified branches of Engineering by lateral entry.
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC).
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after
  •  

Mechanic (Motor Vehicle)

ITI trade Mechanic (Motor Vehicle)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Motor Vehicle) is powered by NCVT.  ITI trade Mechanic (Motor Vehicle)  is a job oriented trade ITI trade Mechanic (Motor Vehicle) is suitable for government job and private job. This ITI trade Mechanic (Motor Vehicle) is very powerful for self-empowerment. This ITI trade Mechanic (Motor Vehicle) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Installs, tests, maintains, repairs and replaces electrical Power distribution/power line equipments and fittings in factories, workshops, power house, business and residential premises etc. Manipulates controls to adjust and activate those equipments. Monitors and records control board/room readings, examines faults in control room and repairs substation equipments and panels to ensure proper operational efficiency.   
Mechanic Motor Vehicle (MMV) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Motor Vehicle Mechanics, Other 
  • Mechanic, Automobile 
  • Maintenance Technician – Service 
  • Workshop 
  • Auto Service Technician – Mechanic 
  • Fitter Automobile
     

Mechanic (Refrigeration and Air-Conditioning)

Mechanic (Refrigeration and Air-Conditioning)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Refrigeration and Air-Conditioning) is powered by NCVT.  ITI trade Mechanic (Refrigeration and Air-Conditioning)  is a job oriented trade ITI trade Mechanic (Refrigeration and Air-Conditioning) is suitable for government job and private job. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is very powerful for self-empowerment. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic (Tractor)

ITI trade Mechanic (Tractor)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Tractor) is powered by NCVT.  ITI trade Mechanic (Tractor)  is a job oriented trade ITI trade Mechanic (Tractor) is suitable for government job and private job. This ITI trade Mechanic (Tractor) is very powerful for self-empowerment. This ITI trade Mechanic (Tractor) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The trainee attending the course on ‘Mechanic Tractor’ shall be able to perform basic fitting , grinding, surface finishing, sheet metal, bending, and welding operations and carry out electrical/electronic, nondestructive, and battery tests, in an tractor workshop. The trainee shall be able to service cooling and lubrication systems, intake and exhaust systems, and fuel feed system, of the tractor. The trainee shall also be able to overhaul diesel engine, clutch and gearbox, differential and PTO Unit, steering system, assemblies of power tiller, implements, and charging and starting systems, of the tractor. 
Mechanic Tractor repairs and overhauls tractors by various mechanical processes for agriculture, constructional and other heavy duties

Trade Syllabus (Practical): 

Trade Practical (27 Hrs/week)

Familiarisation with institute, Job opportunities in the automobile sector, Machinery used in Trade. Types of work done by the students in the shop floor.

Practical related to Safety and Health, Importance of maintenance and cleanliness of Workshop. Interaction with health centre and fire service station to provide demo on First aid and Fire safety, Use of fire extinguishers. Demonstration on safe handling and Periodic testing of lifting equipment, and Safety disposal of Used engine oil. Energy saving Tips of ITI electricity Usage

Practice using all marking aids, like steel rule with spring calipers, dividers, scriber, punches, Chisel etc., Layout a work piece- for line, circle, arcs and circles. Practice to measure a wheel base of a vehicle with measuring tape. Practice to measure valve spring tension using spring tension tester Practice to remove wheel lug nuts with use of an air impact wrench Practice on General workshop tools & power tools.

Measuring practice on Cam height, Camshaft Journal dia, crankshaft journal dia, Valve stem dia, piston diameter, and piston pin dia with outside Micrometers. Measuring practice on the height of the rotor of an oil pump from the surface of the housing or any other auto component measurement with depth micrometer. Measuring practice on valve spring free length. Measuring practice on cylinder bore, Connecting rod bore, inside diameter (ID) of a camshaft bearing with Telescope gauges. Measuring practice on cylinder bore for taper and out-of-round with Dial bore gauges. Measuring practice to measure wear on crankshaft end play, crankshaft run out, and valve guide with dial indicator. Measuring practice to check the flatness of the cylinder head is warped or twisted with straightedge is used with a feeler gauge. Measuring practice to check the end gap of a piston ring, piston-tocylinder wall clearance with feeler gauge. Practice to check engine manifold vacuum with vacuum gauge. Practice to check the air pressure inside the vehicle tires is maintained at the recommended setting

Practice on General cleaning, checking and use of nut, bolts, & studs etc., Removal of stud/bolt from blind hole. Practice on cutting tools like Hacksaw, file, chisel, Sharpening of Chisels, center punch, safety precautions while grinding. Practice on Hacksawing and filing to given dimensions.

Practice on Marking and Drilling clear and Blind Holes, Sharpening of Twist Drills Safety precautions to be observed while using a drilling machine. Practice on Tapping a Clear and Blind Hole, Selection of tape drill Size, use of Lubrication, Use of stud extractor. Cutting Threads on a Bolt/ Stud. Adjustment of two piece Die, Reaming a hole/ Bush to suit the given pin/ shaft, scraping a given machined surface.

Practice on making Rectangular Tray. Pipe bending, Fitting nipples unions in pipes. Soldering and Brazing of Pipes.

Practice in joining wires using soldering Iron, Construction of simple electrical circuits, Measuring of current, voltage and resistance using digital multimeter, practice continuity test for fuses, jumper wires, fusible links, circuit breakers.

Diagnose series, parallel, seriesparallel circuits using Ohm’s law, Check electrical circuit with a test lamp, perform voltage drop test in circuits using multimeter, measure current flow using multimeter /ammeter, use of service manual wiring diagram for troubleshooting.

Cleaning and topping up of a lead acid battery, Testing battery with hydrometer, Connecting battery to a charger for battery charging, Inspecting & testing a battery after charging, Measure and Diagnose the cause(s) of excessive Key-off battery drain (parasitic draw) and do corrective action. Testing of relay and solenoids and its circuit.

Identify and test power and signal connectors for continuity, Identify and test different type of Diodes, NPN & PNP Transistors for its functionality, Construct and test simple logic circuits OR, AND & NOT and Logic gates using switches.

Practice to make straight beads and Butt, Lap & T joints Manual Metal Arc Welding. Setting of Gas welding flames, practice to make a straight beads and joints Oxy – Acetylene welding Film on Heat treatment process

Practice on Liquid penetrant testing method and Magnetic particle testing method. Identification of Hydraulic and pneumatic components used in vehicle. Tracing of hydraulic circuit on hydraulic jack, hydraulic power steering, and Brake circuit. Identification of components in Air brake systems. 

 

 

Mechanic Cum Operator Electronics Communication System

Mechanic Cum Operator Electronics Communication System
Trades Duration: 
Two Year
Trade Type: 
Engineering

Multimedia, Animation & Special Effects

Multimedia, Animation & Special Effects
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Multimedia, Animation & Special Effects is powered by NCVT.  ITI trade Multimedia, Animation & Special Effects  is a job oriented trade ITI trade Multimedia, Animation & Special Effects is suitable for government job and private job. This ITI trade Multimedia, Animation & Special Effects is very powerful for self-empowerment. This ITI trade Multimedia, Animation & Special Effects is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:

  • Multimedia Artist and Animator
  • Cameraman and Animation
  • Graphic Designer
  • Web Designer
  • Rigging Artist
  • Rendering Artist
  • VFX Editor
  • Roto Artist
  • Self Employment etc

Painter (General)

Painter (General)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Painter (General) is powered by NCVT.  ITI trade Painter (General)  is a job oriented trade ITI trade Painter (General) is suitable for government job and private job. This ITI trade Painter (General) is very powerful for self-empowerment. This ITI trade Painter (General) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The ‘Painter (General)’ trade under CTS is one of the popular newly designed courses. The course is of two years (04 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while Core area (Workshop Calculation & science, Engineering Drawing and Employability Skills) impart requisite core skill, knowledge and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Applies decorative or protective coats of paint, varnish, shellac, enamel, lacquer or other materials on exterior or interior surfaces, trimming and fixtures of glass, metal, wood, plaster concrete brick, building boards or other objects using suitable tools as per work requirement 
Painter (General) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.
On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Painter,
  • General

job roles

Painter, General applies decorative or protective coats of paint, varnish, shellac, enamel, lacquer or other materials on exterior or interior surfaces, trimming and fixtures of glass, metal, wood, plaster concrete brick, building boards or other objects using brush, spray gun, roller, stencils etc. Receives work order and selects correct type of paint materials with the consideration to suitability, durability, ease of application and estimated cost. Mixes pigments, oils and other ingredients to material where required by manual or mechanical mixing device using paddle or electric mixer to obtain desired colour, shade and consistency. Removes dirt, grease or rough spots and irregularities by scrapers, chemicals and abrasives and patches cracks and holes with putty or other filler. Covers surface with appropriate prime coat or sealer to have suitable surface or base for paint. Brushes, sprays or stencils one or more coats of material on surfaces. May finish or decorate surfaces by gilding, silvering or painting over stencils. May be designated according to object coated or material used. May mix paint with linseed oil, colouring matter of materials, labour, etc. May erect scaffolds to facilitate work.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Plumber

ITI trade Plumber
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Plumber is powered by NCVT.  ITI trade Plumber  is a job oriented trade ITI trade Plumber is suitable for government job and private job. This ITI trade Plumber is very powerful for self-empowerment. This ITI trade Plumber is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Plumber trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional - skills and knowledge, while Core area (Workshop Calculation science, Engineering Drawing and Employability Skills) imparts requisite core skills, knowledge and life skills. After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Plumber assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Responsible for installation, operation and repair of plumbing system used in housing, commercial and institutional setups, drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc., maintenance and servicing of pipes and sanitary fixtures. 

Plumber has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Plumber, General
  • Plumber, Operations
  • Plumber, General-Installation and Repair
  • Plumber, General Helper
  • Plumber, General Assistant
  • Plumber, Maintenance and Servicing Assistant
  • Plumber, Maintenance and Servicing
  • Pipe Layer/Plumber Pipeline
  • Pipe Fitter
  • Plumbers and Pipe Fitters, Other
  • Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant
  • Plumber (Welder) Assistant
  • Plumber (Pumps and E/M Mechanic)

JOB ROLE

Plumber, General; lays out, assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Receives instructions from Sanitary Engineer or Civil Engineer regarding lay out of pipes, gas or water mains, position of fixtures and fittings, etc. Examines drawings or other specifications regarding size and dimensions of area where sanitary fittings or pipe are to be fitted or laid. Marks points at places to indicate position for fixing brackets and laying pipes. Drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc. to keep or hold fittings and fixtures in position, using nuts, bolts, clamps etc. and tightens them with hand tools. Cuts reams, threads and bends pipes as appropriate. Ensures that pipe lines are laid properly by Pipe Fitter. Joins pipes with sockets, Tees, elbow etc. or with molten lead or lead wool. Caulks joints (operation of making joint seam tight to withstand pressure) and tests them for leaks with pneumatic or hydraulic pressure. May repair and maintain sewerage and pipe lines by replacing washers on leaky faucets, mending burst pipes, opening clogged drains, etc. May do lead burning, dressing and bossing of lead pipe and sheet lead, inlaying of wooden tanks, construction of septic tanks etc

Plumber, Operations; is responsible for operation of plumbing system used in housing, commercial and institutional setups.

Plumber, General-Installation and Repair; Plumber (General)-II is responsible for installation and repair plumbing systems including those of advanced sanitary fixtures as per manufacturer͛s specifications in housing, commercial and institutional setups.

Plumber, General Helper; is responsible for helping Plumber (General) by carrying and handling of tools and materials required in installation, minor repair and maintenance of plumbing systems.

Plumber, General Assistant; is responsible for assistance in, preliminary installation and minor repair work of basic plumbing systems in domestic, commercial and institutional setups.

Plumber, Maintenance and Servicing Assistant; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Plumber, Maintenance and Servicing; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Pipe Layer/Plumber Pipeline; Sewer Pipe Layer lays concrete, stone ware or clay pipes to form sanitary drains and sewers. Receives instructions regarding size and type of concrete, stone ware or clay pipe to be laid. Digs or gets earth dug along marked lines using spade, picks etc. to make trenches for laying pipes. Levels and smoothens bottom of trenches to proper gradient by scooping with shovels. Receives pipes of required size lowered into trench manually or by pulley and adjusts their position by hand or crow-bar for correct levelling and vertical and horizontal alignment. Joints pipes together using appropriate couplings, joints, rings etc. and closes joints by caulking with fibre and cement to prevent leakage. Tests joints by hydraulic or pneumatic pressure after sealing. Fills trench with earth to cover laid pipe and rams earth to avoid sinking. Is designated as PIPE LAYER WATERMAINS or WATER MAINS FITTER if engaged in laying cast iron or galvanized iron water pipe mains and in caulking their joints with lead to prevent leakage. May lay pipe lines to provide water connection to houses, sanitary sewers etc. May fix meters to stopcocks, remove defects from pipe lines and replace defective ones.

Pipe Fitter; lays, repairs and maintains, pipes for supply of water, gas, oil or steam in buildings, gardens, workshops, stores, ships etc., according to drawings or instructions. Examines drawings and other specifications or receives relevant instructions. Cuts passage holes for laying pipes in walls and floors. Cuts reams, threads and bends pipes according to specifications. Lays pipes in cut passage and assembles pipe sections with couplings, sockets, Tee's elbows etc. Levels position of pipes using sprit level for gravitational flow. Caulks joints, tests them for leakage with pneumatic or hydraulic pressure and secures pipe line to structure with clamps, brackets, and hangers. Fits water meters, taps etc. to pipe where necessary. Repairs and replaces leaky pipe lines, taps and joints and provides connections to overhead water tanks. Helps Plumber, General in fittings sanitary fittings to buildings. May join pipe sections and fittings.

Plumbers and Pipe Fitters, Other; perform number of routine and low skilled tasks such as assisting in laying pipes, making water tight joints, fitting sockets and reducers, threading pipes with taps and dies, removing leakages, etc., and are designated as Plumber Mate or Pipe Fitter Helper according to type of work done.

Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant; is responsible for welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Welder) Assistant; is responsible for assistance in welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Pumps and E/M Mechanic); is responsible for installation and repair of Pumps and E/M equipment used for different plumbing applications of housing, commercial and institutional Set ups.

Sewing Technology

Sewing Technology
Trades Duration: 
One year
Trade Type: 
Non Engineering

ITI trade Sewing Technology is powered by NCVT.  ITI trade Sewing Technology  is a job oriented trade ITI trade Sewing Technology is suitable for government job and private job. This ITI trade Sewing Technology is very powerful for self-empowerment. This ITI trade Sewing Technology is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Sewing Technology’ constructs Sari Petticoat, Ladies’ Top/Short Kurthies, Ladies’ Suit, Nightwear (One Piece with Yoke), Nightwear (Two Piece – Night suit), Sari Blouse (Simple Model - Plain), Dress for a Newborn (Jhabla), Dress for a Toddler (Sun Suit), Dress for Kids (Frock), Dress for Kids (Frock), Gent’s, Casual Shirt, and Gent’s Trousers, according the sketched designs. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Assistant to Designer, Assistant worker in Boutique, Assistant to Sample Garment Designer and Assistant to Garment Sample Coordinator 

The qualification gives access to jobs such as Sewing Machine operator, Assistant to Designer, Assistant worker in Boutique, Assistant to Sample Garment Designer and Assistant to Garment Sample  Coordinator
 

Soil Testing and Crop Technician

Soil Testing and Crop Technician
Trades Duration: 
One year
Trade Type: 
Non Engineering

ITI trade Soil Testing and Crop Technician is powered by NCVT.  ITI trade Soil Testing and Crop Technician  is a job oriented trade ITI trade Soil Testing and Crop Technician is suitable for government job and private job. This ITI trade Soil Testing and Crop Technician is very powerful for self-empowerment. This ITI trade Soil Testing and Crop Technician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:

  • Laboratory Assistant-Soil
  • Soil Conservationist
  • Soil Scientist
  • Field Crop and Vegetable Growers
  • Cultivator-Crop
  • Self Employment

CTS courses are delivered nationwide through network of ITIs. The course ‘Soil Testing and Crop Technician’ is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area Trade Theory & Practical impart professional skills and knowledge, while Core area Employability Skills imparts requisite core skill, knowledge and life skills. After passing out the training programme, the trainee is being awarded National Trade Certificate (NTC) by NCVT having worldwide recognition.

JOB ROLE

Laboratory Assistant, Soil; sets up apparatus and equipment, conducts routine soil tests in laboratory for determining soil characteristics to correct soil defects, raise fertility, etc. and assists Soil Scientist or Chemist as required. Collects samples of required type of soil. Gets them dried in oven and sieved to get soil of required size. Weighs fixed quantities of soil, sets apparatus and conducts routine tests to determine their physical and chemical properties, such as shear strength, permeability, composition, water content, percentage of nitrogen etc. Adds or eliminates chemicals and salts from soil as directed by Soil Technologist or Chemist to remove defects, raise fertility etc. to render better yield. Maintains record of reading and observations, for calculating and reference purposes. Prepares standard chemicals and solutions required for testing samples and maintains laboratory clean and tidy.

Paddy Farmer; cultivates paddy as per the package of practices recommended for a particular agronomic climate zone, type of soil, rainfall pattern and climatic conditions to achieve the yields as per the genetic potential of a given variety and sell the produce in the market.

Cultivator, Crop; Farmer, Crop grows field crops of wheat, paddy, cotton, sugar cane etc., according to type of land and irrigation facilities available. Determines type of crop to be grown according to nature of soil, climatic conditions, irrigation and marketing facilities in that area. Selects and purchases seeds, fertilises and other items of farm equipment including machinery. Clears land of grass, stones etc. using spades and other tools. Divides farm into easy portions (fields) and raises boundary round them for retention of water. Ploughs land or breaks it by means of tractor or other implements to soften earth and increase fertility. Connects land with source of water by digging channels for irrigation as required. Sows by broadcasting seeds in field and leveling up with wooden plough. Conducts weeding and hoeing to conserve moisture. Fences farm using barbed wire or thorny bushes to prevent destruction of crops by animals and trespassing. Sprays insecticides and evolves measures to protect crop from plant diseases, insects and pests. Nurses growing crops by careful watch and harvests matured crops using sickle or other harvesting implements or machines. Collects and preserves seeds. Collects harvested crop into bundles and removes to threshing floors. Dries harvested crop in sun. Threshes crop and winnows to separate grain from chaff. Bags and transports yield by carts for storage and sale in market. Hires labourers if required and supervises their work. Prepares manure by collecting and storing cow dung into ditch. Keeps equipment, building, fences etc. in good order. May operate tractor, winnowing, threshing and other machines, May breed animals.

Cultivator, Vegetables; Farmer, Vegetables grows variety of vegetables according to soil, season and demand. Determines vegetables to be grown taking into consideration nature of soil, irrigation facilities, climatic conditions, consumption and market values. Selects and purchases seed, fertilisers and other items of farm equipment including machines. Ploughs land adopting indigenous methods or breaks land by tractor. Divides land into small plots by raising small bunds (earthwork) around for retention of water and manure. Clears land by removing grass, stones, etc. by hand. Mixes manure with soil, sows seeds by spreading over ground and levelling or plant cutting and irrigates field as required, by digging out drains and connecting them to source of water. Fences farm if required with barbed wire or thorny bushes for protection. Spray insecticides and takes other protective measures against plant diseases and destruction by wild animals, pests etc. Hoes and weeds fields to conserve moisture. Harvests matured vegetables by cutting with knife or pulling or digging out from ground using hand tools. Transports vegetables to market place for sale. Hires labourers on cultivation if required and supervises their work. Keeps buildings, fences and other agricultural equipment in good repairs. Collects farmyard refuse to convert it into manure. May operate tractor for preparing fields. May arrange to keep vegetables in cold storage. May specialize in growing any particular kind of vegetable like peas, potatoes, etc

Stenographer & Secretarial Assistant (English)

Stenographer & Secretarial Assistant
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed
Trade Type: 
Non Engineering

ITI trade Stenographer & Secretarial Assistant (English) is powered by NCVT.  ITI trade Stenographer & Secretarial Assistant (English)  is a job oriented trade ITI trade Stenographer & Secretarial Assistant (English) is suitable for government job and private job. This ITI trade Stenographer & Secretarial Assistant (English) is very powerful for self-empowerment. This ITI trade Stenographer & Secretarial Assistant (English) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Stenographer Secretarial Assistant (English) trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while the core area (Employability Skill) imparts requisite core skills, knowledge, and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the senior 
Stenographer Secretarial Assistant (English)
has a wide scope of Employability ranging from self-employment, contractual employment. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Private Secretary
  • Personal Secretary
  • Secretaries, Other

JOB ROLE

Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the boss. Following are the job roles for a Stenographer Secretarial Assistant (English):

  • Correspond through emails, phone and faxes
  • Maintaining and updating filing systems
  • Coordinating with department heads to ensure smooth working of the organization
  • Handling day-to-day administrative duties of the organization
  • Making arrangement for meetings, conference and seminars
  • Handling various activities within and outside the organization
  • Taking dictation in shorthand and operating typewriter for transcribing dictated materials
  • Handled and maintained correspondence files and other official documents
  • Made travel bookings for domestic and international services
  • Drafted business letters in clear and precise manner for easy understanding
  • Coordinated business meetings and wrote minutes of meetings in shorthand
  • Handled confidential information of the organization
  • Prepared reports and documents for inter-department
  • Handled day-to-day activities of the organization
  • Prepared various presentations for the management team 

Stenographer & Secretarial Assistant (Hindi)

Stenographer & Secretarial Assistant (Hindi)
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed
Trade Type: 
Non Engineering

ITI trade Stenographer & Secretarial Assistant (Hindi) is powered by NCVT.  ITI trade Stenographer & Secretarial Assistant (Hindi)  is a job oriented trade ITI trade Stenographer & Secretarial Assistant (Hindi) is suitable for government job and private job. This ITI trade Stenographer & Secretarial Assistant (Hindi) is very powerful for self-empowerment. This ITI trade Stenographer & Secretarial Assistant (Hindi) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

‘Stenographer Secretarial Assistant (Hindi)’ trade under CTS is delivered nationwide through a network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while the Core area (Employability Skill) imparts requisite core skills, knowledge, and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Stenographer Secretarial Assistant (Hindi) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. He/she drafts business letters in clear and precise manner for easy understanding; prepares reports and documents for inter-department. 
Stenographer Secretarial Assistant (Hindi) has a wide scope of Employability ranging from self-employment, contractual employment. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Secretary/Back Office Support 
  • Private Secretary 
  • Personal Secretary 
  • Secretaries, Other

JOB ROLE

Stenographer Secretarial Assistant (Hindi); takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the boss.

Private Secretary-cum-Stenographer; Personal Assistant takes dictation in shorthand and reproduces it on paper using typewriter and performs various other clerical duties to assist superiors. Takes dictations in shorthand and transcribes them using typewriter. Receives and opens mail and submits it to superiors for information and further action. Maintains diary to note time, date and place of meetings and other engagements for employer or superior. Reminds employer or superior of engagements and accompanies him if required. Attends to routine enquiries in person, writing or over phone. Receives visitors and arranges their interviews with superior. Keeps important and confidential records. May attend to routine correspondence on behalf of employer.

Personal Secretary; performs routine clerical and administrative functions such as drafting correspondence, scheduling appointments, organizing and maintaining paper and electronic files, or providing information to callers. Operates office equipment such as fax machines, copiers, and phone systems, and use computers for spreadsheet, word processing, database management, and other applications. Answers telephones and give information to callers, take messages, or transfer calls to appropriate individuals. Greets visitors and callers, handle their inquiries, and direct them to the appropriate persons according to their needs. Sets up and maintains paper and electronic filing systems for records, correspondence, and other material. Locates and attaches appropriate files to incoming correspondence requiring replies. Opens, reads, routes, and distributes incoming mail and other material, and prepares answers to routine letters. Completes forms in accordance with company procedures

Secretaries, Other; include secretaries who use typewriters or word-processing equipment to check and transcribe correspondence and other documents, deal with incoming and outgoing mail, and deal with routine correspondence on their own initiative not elsewhere classified.

Secretary/Back Office Support; Stenographers; Steno-typist records dictations in shorthand and transcribe them in typewritten form. Takes dictation in shorthand. Transcribe dictated material from note book, using typewriter. Compares typed matter and submits them to superiors. May cut stencil on typewriter for use on duplicating machine.

Technician Power Electronics System

Technician Power Electronics System
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

During  the  two  years  duration  of  Technician  Power  Electronics  Systems  trade,  a candidate   is   trained   on   Professional   Skill,   Professional   Knowledge,   Engineering Drawing, Workshop Calculation & Science and Employability Skill. In addition to this, a candidate is entrusted to undertake project work and extracurricular activities to build up confidence. The broad components covered related to the trade are categorized in four semesters each of six months duration. The semester wise course coverage is categorized as below:

1stSemester –  In this semester, the trainee learns about safety and environment, use of fire extinguishers, artificial respiratory resuscitation to begin with. He gets the idea of trade tools & its standardization, familiarize with basics of electricity, test the cable and  measure  the electrical parameter. Skilling practice on different types & combination of cells for operation and  maintenance  of  batteries  being  done.  Identify  and  test  passive  and  active  electronic components. Construct and and de-soldering of various PCBs. Assemble a computerest unregulated and regulated power supplies. Practice soldering types of electrical and electronic components on through-hole system, install OS, Practice with MS office. Use the internet, browse, create mail IDs, download desired data from internet using search engines.

2nd Semester - In this semester, the candidate will be able to construct and test amplifier, oscillator and wave shaping circuits. Testing of power electronic components. Construct and test power control circuits. Identify and test opto-electronic devices. Able to achieve the skill on SMD Soldering and De-soldering of discrete SMD components. Verifying the truth tables of various digital 1Cs by referring Data book. ractice circuit simulation software to simulate and test various circuits. Identify various types of LEDS, LED displays and interface them to a digital counter and test. Construct and test various circuits using linear ICs 741 & 555.

3rd Semester - In this semester, the trainee will be able to operate DSO and perform various functions. Gaining the skill by practicing SMD Soldering and De-soldering. Introduction with protection devices. Familiarize with the instruction set of 8051 microcontroller. Interface a model application with the Microcontroller kit and run the application. Working with three phase rectifier, chopper, SMPS, inverters and UPS. Interpret electrical control circuits used in industries. Installation and setup of fibre-optic communication system. Identify construction of various electro-pneumatic circuits. Make simple project applications using 1Cs, transformer and other discrete components.

4th Semester – In this semester, the trainee will work on installing a solar panel, execute testing and  evaluate  performance  by  connecting  the  panel  to  the  inverter.  Operation  of  different process sensor, identify, wire & test various sensors of different industrial  processes  by  selecting appropriate test instruments. Assemble, test & troubleshoot various digital controlled field devices and execute the result. Perform speed control of DC machine and single phase and 3-phase AC machines. Install, configure and check the performance of AC and DC  drive  to control the speed. Perform speed control of servo motor and test different industrial process circuit by selecting the suitable function. Install, test & control the Electro-Pneumatic actuators using various pneumatic valves. Execute the operation of different indication on PLC modules and wire different field devices of PLC and configure the system and perform the suitable function.

JOB ROLE

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics Mechanic; Electronic Equipment Mechanic repairs electronic equipment, such as computers, industrial controls, transmitters and telemetering control systems following blueprints and manufacturer's specifications and using hand tools and test instruments. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work checks the installation site, understands the layout requirement as per design, assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.

Optical Fiber Technician is responsible for maintaining uptime and quality of the network segment (both optical media and equipment) assigned to him by undertaking periodic preventive maintenance activities and ensuring effective fault management in case of fault occurrence. He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF) as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS Repair Technician’, this is an after sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual also interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan.

PLC Assembly Operator; is responsible for completing the printed circuit board (PCB) and box assembly of the PLC components. The individual at work assembles the power supply and micro-controller PCBs, sends them for programming and completes the box assembly thereafter.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Tool & Die Maker (Dies & Moulds)

Tool & Die Maker (Dies & Moulds)
Trades Duration: 
Two Year
Trade Type: 
Engineering

1. Introduction:

This course is meant for the candidates who aspire to become a professional Tool and Die maker (Dies & Moulds).
.
2. Terminal Competency/Deliverables:

After successful completion of this course the trainee shall be able to perform the following skills with proper sequence.

  • 1. The trainees can work in the industry as semi-skilled Tool and Die Maker (Dies & Moulds).
  • 2. The trainee can able to manufacture different components for dies & moulds by operating different machines like lathe, drilling, welding, milling grinding, EDM, Injection moulding and CNC. Inspection & measurement of different components and observing safety precautions while working.
  • 3. The trainees can work on Dismantle & assemble of various dies & moulds and test.
  • 4. Trainee is able to make simple programme on CNC machine and operate.
  • 5. Handle different type of Fire extinguishers.

3.. Employment opportunities:

On successful completion of this course, the candidates shall be gainfully employed in
the following industries:

  • 1. Production & Manufacturing industries.
  • 2. Structural Fabrication like bridges, Roof structures, Building & construction.
  • 3. Automobile and allied industries
  • 4. Service industries like road transportation and Railways.
  • 5. Ship building and repair
  • 6. Infrastructure and defense organizations
  • 7. In public sector industries like BHEL, BEML, NTPC, etc and private industries in India & abroad.
  • 8. Self employment 

Turner

ITI trade Turner
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Turner is powered by NCVT.  ITI trade Turner  is a job oriented trade ITI trade Turner is suitable for government job and private job. This ITI trade Turner is very powerful for self-empowerment. This ITI trade Turner is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion the passed out trainee

  • 1.  Can work in the industry as skilled turner.
  • 2. Can work in the field of basic fitting, lathe, drilling, Inspection & measurement observing safety precautions.
  • 3.  Can perform all the turning operations on lathe & perform simple programming & operations on a CNC lathe.
  • 4. Can handle different type of Fire extinguishers & personal protective equipment.

Welder

ITI trade Welder
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Welder is powered by NCVT.  ITI trade Welder  is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc

Wireman

ITI trade Wireman
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
8th Passed
Trade Type: 
Engineering

ITI trade Wireman is powered by NCVT.  ITI trade Wireman  is a job oriented trade ITI trade Wireman is suitable for government job and private job. This ITI trade Wireman is very powerful for self-empowerment. This ITI trade Wireman is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Wireman, Light and Power installs various kinds of electrical wiring such as cleat, conduit, casing, concealed etc. in houses, factories, workshops and other establishments for light and power supply. Studies diagram and plan of wiring and marks light, power and other points accordingly. Fixes wooden pegs, sizes tubes, saws casings, etc. by common carpentry fitting and other processes, according to type of wiring needed. Erects switch boards and fixes switch box casings cleats, conduits ceiling roses, switches, meters etc. according to type and plan of wiring. Draws wire in two way or three-way wiring system as prescribed and makes electrical connections through plugs and switches to different points exercising great care for safety and avoiding short circuit and earthing at any stage of wiring. Fixes fuses and covers as per diagram and insulates all naked wires at diversions and junctions to eliminate chances of short circuit and earthing. Fits light brackets, holders, shades, tube and mercury lights, fans etc, and makes electrical connection as necessary. Tests checks installed wiring for leakage and continuity using megger, removes faults if any and certifies wiring as correct for connecting mains. Checks existing wiring for defects and restores current supply by replacing defective switches, plug sockets, blown fuse etc. or removing short circuits and faulty wiring as necessary. May repair simple electrical domestic appliances. 

Electrical wiring works such as cleat, conduit, casing, concealed etc. in houses, factories, workshops and other establishments for light and power supply.

Map: 

ITI Student Resume Portal

रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं

ITI Student Resume

ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं

 

Search engine adsence