Govt Industrial Training Institute Budgam
Govt Industrial Training Institute Budgam is situated in Budgam Jammu and Kashmir. Govt Industrial Training Institute Budgam is Industrial Training Institute under NCVT Govt Industrial Training Institute Budgam. Location of Govt Industrial Training Institute Budgam is Khanpora Wadipora Budgam Jammu and Kashmir.
Government ITI
Government ITI is leading educational organisatin in india. Teching facualty of Government ITI is suprimo. ITI is providing latest Job oriened cource for student. This Government ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme .
Jammu and Kashmir
The development of Technical Education, contributes substantially to the Socio-sustenance of the industrial sector, is entirely dependent upon the availability of trained manpower to perform the multidimensional activities needed to keep the wheel of industry running. The Technical Education Department aims towards making available these trained technically qualified hands to serve the industry and society. Technical education system is thus made flexible enough to adapt to rapid change. In the state, the Department of Technical Education plays a lead role in the Technical education sector.
The Directorate of Technical Education ensures a planned development of Technical Education in the state consistent with the policies of State and the Nation. We are committed to provide need based, quality technical and professional human resources to the industry, business and community.
The Department of Technical Education, as it is known today came into existence in the year 1981, having under its ambit both Polytechnics and Industrial Training Institutes (ITI's). It owes its genesis to the Department of Industrial Training and Employment which in 1979 diverged into the Directorate of ITI's lasting till 1981. Polytechnic Institutes were then under the Higher Education Department before the formation of the Department of Technical Education.
The Department initially had 07 ITI's and 02 Polytechnics, which over a period of time have grown to 60 ITI's {54 in Government Sector and 06 in Private Sector} and 32 Polytechnics {24 in Government Sector and 08 in Private Sector} out of 24 Government Polytechnics 02 Polytechnics one each are operating under the administrative control of Islamic University of Science and Technology (IUST) Awantipora Pulwama and Baba Gulam Shah Badshah University (GBSBU) Rajouri.
The Intake capacity in ITI's as of now is at 15763 in 72 varied trades of 06 months, 01 year and 02 years durations in formal mode of training. In Polytechnics AICTE recognized 03 year Diploma Programs in 16 different courses are being offered with an intake of 5655 seats.
Besides formal training in our established institutes both in ITI & Polytechnic sectors various other schemes of human resource capacity development have been taken up in hand by the department. The department is acting as a nodal department for Skill Development Mission in the state with having its own target of training 78593 numbers of youth in different employable technical skills over a period of 05 years, till date 24626 youth during 2012-13 received training within and outside the state. The department is set to achieve a target of 44813 during the current financial year of 2013-14. VTPs, ITI's in Public Private Partnership mode (PPP), besides other centrally funded schemes are operational in the ITI sector of the Department.
In Polytechnic sector 18 new Polytechnics have been established and are functional since 2012 thereby increasing the seating capacity in core and specialized engineering and non engineering disciplines.
11 Polytechnic Institutes {04 Government and 07 Private} are participating in a centrally funded scheme of Community Development through Polytechnic (CDTP}. Through CDTP scheme 03/06 months Short Term Skill oriented training Programme are being conducted for rural poor for uplifting their economic conditions.
Thus the Department of Technical Education has envisioned creating a Human resource pool with spectrum of Technical competencies at cutting edge levels and is achieving its goals by expanding access to Technical Education & Training to all through expansion and up-gradation while improving the quality standards of Education & Training by regular revision of curriculum through strong industry interaction.
Computer Operator and Programming Assistant (COPA)
ITI trade Computer Operator and Programming Assistant (COPA) is powered by NCVT. ITI trade Computer Operator and Programming Assistant (COPA) is a job oriented trade ITI trade Computer Operator and Programming Assistant (COPA) is suitable for government job and private job. This ITI trade Computer Operator and Programming Assistant (COPA) is very powerful for self-empowerment. This ITI trade Computer Operator and Programming Assistant (COPA) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
The individual can work as both Computer Operator/ Programming Assistant; operates computer and peripheral equipment to process business, scientific, engineering, or other data, according to operating instructions. As programming assistant installs, maintains and updates computer programs by making minor changes and adjustments to them under the guidance of computing professionals. Maintains and updates documents of computer programs and installations with assistance under supervision of supervisor
On successful completion of this course the candidates shall be gainfully employed as:
- Computer Operator
- Programming Assistant
Dress Making
ITI trade Dress Making is powered by NCVT. ITI trade Dress Making is a job oriented trade ITI trade Dress Making is suitable for government job and private job. This ITI trade Dress Making is very powerful for self-empowerment. This ITI trade Dress Making is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
A trainee of the course ‘Dress Making’ constructs dresses for children (Yoke Frock), dresses for teenagers, ladies dress, ladies suit, ladies night wear, ladies blouse, gents shirt, and gents trouser, according the sketched designs and blocks using adaptation/draping and manipulation techniques. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, and Assistant Production Merchandiser
The qualification gives access to jobs such as Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, Assistant Production Merchandiser.
This qualification will enable the trainee to find employment as a skilled worker to perform jobs in the Dress Making field
Dressmaking
ITI trade Dressmaking is powered by NCVT. ITI trade Dressmaking is a job oriented trade ITI trade Dressmaking is suitable for government job and private job. This ITI trade Dressmaking is very powerful for self-empowerment. This ITI trade Dressmaking is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
A trainee of the course ‘Dress Making’ constructs dresses for children (Yoke Frock), dresses for teenagers, ladies dress, ladies suit, ladies night wear, ladies blouse, gents shirt, and gents trouser, according the sketched designs and blocks using adaptation/draping and manipulation techniques. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, and Assistant Production Merchandiser
The qualification gives access to jobs such as Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, Assistant Production Merchandiser.
This qualification will enable the trainee to find employment as a skilled worker to perform jobs in the Dress Making field
Electrician
ITI trade Electrician is powered by NCVT. ITI trade Electrician is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
- Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.
- After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board.
- They can set up their own Rewinding and servicing of Domestic Equipment shop.
- Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various Industries etc
- They can also go for further higher studies after successful completion of course.
- Students who have completed this course have found employment in the following areas:
- Service/Maintenance Technician for domestic appliances in Reputed Companies
- Winder of Electrical Motors in winding shop
- Contractor for domestic wiring and industrial wiring
- Armature winder of Electrical fans and motors
- Electrical appliance repair in electrical shops
- Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
- Local Electricity Board
- Assembler of Electrical control Gears
- Telephone Department
- Installation and Testing division of Auditorium and Cinema Hall
- Factories
- As Instructor in Govt./Private ITI/ITC
- Merchant Navy
- Indian Air Force
- Self-Employment in Service Centre
Electronics Mechanic
ITI trade Electronics Mechanic is powered by NCVT. ITI trade Electronics Mechanic is a job oriented trade ITI trade Electronics Mechanic is suitable for government job and private job. This ITI trade Electronics Mechanic is very powerful for self-empowerment. This ITI trade Electronics Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Brief description of job roles:
Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.
Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.
Electronics Mechanic; Electronic Equipment Mechanic repairs electronic equipment, such as computers, industrial controls, transmitters, and telemetering control systems following blueprints and manufacturer's specifications and using hand tools and test instruments. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.
Radio Technician (Radio Manufacturing) tests assembled radio sets with testing equipment to ensure that assembly soldering, frequency, performance, etc. are in accordance with prescribed standards. Places assembled radio set in position and visually examines it to ensure that position of components, connections, soldering, wiring, etc. are in order. Switches on and operates different knobs to check calibration, audibility and general performance of set by varying its tone and listening to various stations and frequencies. Tightens loose nuts and screws, locates faults, replaces defective components and conducts necessary changes. Approves correctly assembled sets for further processing and rejects defective ones for rectification. May tests sets at different stages of assembly. May service, repair and overhaul radio sets.
Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work checks the installation site, understands the layout requirement as per design, assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.
Optical fibre technician is responsible for maintaining uptime and quality of the network segment (both optical media and equipment) assigned to him by undertaking periodic preventive maintenance activities and ensuring effective fault management in case of fault occurrence. He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF) as per the route plan.
Field Technician: UPS and Inverter is also called, ‘UPS repair Technician’, this is an after sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual also and interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.
Television Installation Man installs and adjusts television receivers and antennas, using hand tools. Selects antenna according to type of set and location of transmitting station. Bolts cross arms and dipole elements in position to assemble antenna. Secures antenna in place with bracket and guy wires, observing insurance codes and local ordinances to protect installation from lighting and other hazards. Drills and waterproofs holes in building to make passage for transmission line. Connects line between receiver and antenna and fastens it in place. Tunes receiver on all channels and adjusts screws to obtain desired density, linearity, focus and size of picture. Orients antenna and installs reflector to obtain strongest possible reception.
Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole, using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools, test equipment.
Television Service and Repairman repairs and adjusts radios and television receivers, using hand tools and electronic testing instruments. Tunes receiver on all channels and observes audio and video characteristics to locate source of trouble. Adjusts controls to obtain desired density, linearity, focus and size of picture. Examines chassis for defects. Tests voltages and resistance of circuits to isolate defect following schematic diagram and using voltmeter, oscilloscope, signal generator and other electronic testing instruments. Tests and changes tubes, solders loose connections and repairs or replaces defective parts, using hand tools and soldering iron. Repair radios and other audio equipment.
Television Repair Technician job role is applicable to both Television manufacturing facilities as well as electronics service centres. This role pertains to rectify faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.
Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.
Front Office Assistant
ITI trade Front Office Assistant is powered by NCVT. ITI trade Front Office Assistant is a job oriented trade ITI trade Front Office Assistant is suitable for government job and private job. This ITI trade Front Office Assistant is very powerful for self-empowerment. This ITI trade Front Office Assistant is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Front Office Assistant has a wide scope of
Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:
- Receptionist (Hotel)/ Front Office Associate
- Hotel Receptionists, Other
- Reception Clerk/Front Desk Executive/Receptionist
Mechanic (Motor Vehicle)
ITI trade Mechanic (Motor Vehicle) is powered by NCVT. ITI trade Mechanic (Motor Vehicle) is a job oriented trade ITI trade Mechanic (Motor Vehicle) is suitable for government job and private job. This ITI trade Mechanic (Motor Vehicle) is very powerful for self-empowerment. This ITI trade Mechanic (Motor Vehicle) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Installs, tests, maintains, repairs and replaces electrical Power distribution/power line equipments and fittings in factories, workshops, power house, business and residential premises etc. Manipulates controls to adjust and activate those equipments. Monitors and records control board/room readings, examines faults in control room and repairs substation equipments and panels to ensure proper operational efficiency.
Mechanic Motor Vehicle (MMV) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:
- Motor Vehicle Mechanics, Other
- Mechanic, Automobile
- Maintenance Technician – Service
- Workshop
- Auto Service Technician – Mechanic
- Fitter Automobile
Mechanic Consumer Electronics Appliances
ITI trade Mechanic Consumer Electronics Appliances is powered by NCVT. ITI trade Mechanic Consumer Electronics Appliances is a job oriented trade ITI trade Mechanic Consumer Electronics Appliances is suitable for government job and private job. This ITI trade Mechanic Consumer Electronics Appliances is very powerful for self-empowerment. This ITI trade Mechanic Consumer Electronics Appliances is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
The Mechanic Consumer Electronic Appliances trade under CTS is one of the popular newly designed courses. The earlier course was Mechanic Consumer Electronics. The course is of two years (04 semester) duration. It mainly consists of trade (skills and knowledge) and Core area (Workshop Calculation & Science, Engineering Drawing and Employability Skills). After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.
Brief description of job roles:
Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.
Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.
Electronics Mechanic; Electronic Equipment Mechanic repairs electronic equipment, such as computers, industrial controls, transmitters, and telemetering control systems following blueprints and manufacturer's specifications and using hand tools and test instruments. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.
Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work checks the installation site, understands the layout requirement as per design, assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.
Optical Fibre Technician is responsible for maintaining uptime and quality of the network segment (both optical media and equipment) assigned to him by undertaking periodic preventive maintenance activities and ensuring effective fault management in case of fault occurrence. He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF) as per the route plan.
Field Technician: UPS and Inverter is also called, ‘UPS Repair Technician’, this is an after sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual also and interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.
Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole, using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools, test equipment.
Television Repair Technician job role is applicable to both Television manufacturing facilities as well as electronics service centres. This role pertains to rectifying faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.
DTH Set-Top Box Installer and Service Technician installs set-top boxes and provides after sales service for Direct to Home (DTH) system. The individual at work installs the set-top box at customers’ premises; addresses the field serviceable complaints and co-ordinates with the technical team for activation of new connections
Field Technician, Washing Machine is also, called ‘Washing Machine Repair Technician’. This job is about providing after sales service to customers. The individual at work installs the washing machine, interacts with customers to diagnose the problem and assesses possible causes of fault reported. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.
Field Technician, Other Home Appliances is also called, ‘Home Appliance Repair Technician’, this is an after sales service job for installing and providing support to the water purifier, mixer/grinder buyers. The individual at work installs the appliance and interacts with customers to diagnose the problem and possible causes. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.
Access Controls Installation Technician: Also called ‘Access Control Device Installer’, the Access Control Installation Technician provides after sale support services for access control devices and systems such as point of sale scanners, finger print or iris scan. The individual at work is responsible for installing the access control system at the customer’s premises. The individual undertakes site assessment, installs the hardware and integrates the system to meet customer’s requirement.
Field Engineer TV is also called, ‘Service Engineer – TV’, the TV Field Engineer provides installation and after sales service to buyers of TV and other consumer electronic products such as home theatre system, DVD and Blu-ray players, audio systems, headphones etc. The individual at work interacts with customers to install the entertainment system and diagnose any problems to assess possible causes of malfunction. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.
Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.
Stenographer & Secretarial Assistant (English)
ITI trade Stenographer & Secretarial Assistant (English) is powered by NCVT. ITI trade Stenographer & Secretarial Assistant (English) is a job oriented trade ITI trade Stenographer & Secretarial Assistant (English) is suitable for government job and private job. This ITI trade Stenographer & Secretarial Assistant (English) is very powerful for self-empowerment. This ITI trade Stenographer & Secretarial Assistant (English) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Stenographer Secretarial Assistant (English) trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while the core area (Employability Skill) imparts requisite core skills, knowledge, and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.
Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the senior
Stenographer Secretarial Assistant (English)
has a wide scope of Employability ranging from self-employment, contractual employment. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:
- Private Secretary
- Personal Secretary
- Secretaries, Other
JOB ROLE
Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the boss. Following are the job roles for a Stenographer Secretarial Assistant (English):
- Correspond through emails, phone and faxes
- Maintaining and updating filing systems
- Coordinating with department heads to ensure smooth working of the organization
- Handling day-to-day administrative duties of the organization
- Making arrangement for meetings, conference and seminars
- Handling various activities within and outside the organization
- Taking dictation in shorthand and operating typewriter for transcribing dictated materials
- Handled and maintained correspondence files and other official documents
- Made travel bookings for domestic and international services
- Drafted business letters in clear and precise manner for easy understanding
- Coordinated business meetings and wrote minutes of meetings in shorthand
- Handled confidential information of the organization
- Prepared reports and documents for inter-department
- Handled day-to-day activities of the organization
- Prepared various presentations for the management team
Welder
ITI trade Welder is powered by NCVT. ITI trade Welder is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc
ITI Student Resume Portal
रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं
ITI Student Resume
ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं
