Govt Industrial Training Institute Doda
Govt Industrial Training Institute Doda is situated in Doda Jammu and Kashmir. Govt Industrial Training Institute Doda is Industrial Training Institute under NCVT Govt Industrial Training Institute Doda. Location of Govt Industrial Training Institute Doda is Doda Doda Jammu and Kashmir.
Private ITI
Private ITI is leading educational organisatin in india. Teching facualty of Private ITI is suprimo. ITI is providing latest Job oriened cource for student. This Private ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme . ITI is registered by government under NCVT .
Jammu and Kashmir
The development of Technical Education, contributes substantially to the Socio-sustenance of the industrial sector, is entirely dependent upon the availability of trained manpower to perform the multidimensional activities needed to keep the wheel of industry running. The Technical Education Department aims towards making available these trained technically qualified hands to serve the industry and society. Technical education system is thus made flexible enough to adapt to rapid change. In the state, the Department of Technical Education plays a lead role in the Technical education sector.
The Directorate of Technical Education ensures a planned development of Technical Education in the state consistent with the policies of State and the Nation. We are committed to provide need based, quality technical and professional human resources to the industry, business and community.
The Department of Technical Education, as it is known today came into existence in the year 1981, having under its ambit both Polytechnics and Industrial Training Institutes (ITI's). It owes its genesis to the Department of Industrial Training and Employment which in 1979 diverged into the Directorate of ITI's lasting till 1981. Polytechnic Institutes were then under the Higher Education Department before the formation of the Department of Technical Education.
The Department initially had 07 ITI's and 02 Polytechnics, which over a period of time have grown to 60 ITI's {54 in Government Sector and 06 in Private Sector} and 32 Polytechnics {24 in Government Sector and 08 in Private Sector} out of 24 Government Polytechnics 02 Polytechnics one each are operating under the administrative control of Islamic University of Science and Technology (IUST) Awantipora Pulwama and Baba Gulam Shah Badshah University (GBSBU) Rajouri.
The Intake capacity in ITI's as of now is at 15763 in 72 varied trades of 06 months, 01 year and 02 years durations in formal mode of training. In Polytechnics AICTE recognized 03 year Diploma Programs in 16 different courses are being offered with an intake of 5655 seats.
Besides formal training in our established institutes both in ITI & Polytechnic sectors various other schemes of human resource capacity development have been taken up in hand by the department. The department is acting as a nodal department for Skill Development Mission in the state with having its own target of training 78593 numbers of youth in different employable technical skills over a period of 05 years, till date 24626 youth during 2012-13 received training within and outside the state. The department is set to achieve a target of 44813 during the current financial year of 2013-14. VTPs, ITI's in Public Private Partnership mode (PPP), besides other centrally funded schemes are operational in the ITI sector of the Department.
In Polytechnic sector 18 new Polytechnics have been established and are functional since 2012 thereby increasing the seating capacity in core and specialized engineering and non engineering disciplines.
11 Polytechnic Institutes {04 Government and 07 Private} are participating in a centrally funded scheme of Community Development through Polytechnic (CDTP}. Through CDTP scheme 03/06 months Short Term Skill oriented training Programme are being conducted for rural poor for uplifting their economic conditions.
Thus the Department of Technical Education has envisioned creating a Human resource pool with spectrum of Technical competencies at cutting edge levels and is achieving its goals by expanding access to Technical Education & Training to all through expansion and up-gradation while improving the quality standards of Education & Training by regular revision of curriculum through strong industry interaction.
Computer Operator and Programming Assistant (COPA)
ITI trade Computer Operator and Programming Assistant (COPA) is powered by NCVT. ITI trade Computer Operator and Programming Assistant (COPA) is a job oriented trade ITI trade Computer Operator and Programming Assistant (COPA) is suitable for government job and private job. This ITI trade Computer Operator and Programming Assistant (COPA) is very powerful for self-empowerment. This ITI trade Computer Operator and Programming Assistant (COPA) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
The individual can work as both Computer Operator/ Programming Assistant; operates computer and peripheral equipment to process business, scientific, engineering, or other data, according to operating instructions. As programming assistant installs, maintains and updates computer programs by making minor changes and adjustments to them under the guidance of computing professionals. Maintains and updates documents of computer programs and installations with assistance under supervision of supervisor
On successful completion of this course the candidates shall be gainfully employed as:
- Computer Operator
- Programming Assistant
Electrician
ITI trade Electrician is powered by NCVT. ITI trade Electrician is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
- Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.
- After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board.
- They can set up their own Rewinding and servicing of Domestic Equipment shop.
- Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various Industries etc
- They can also go for further higher studies after successful completion of course.
- Students who have completed this course have found employment in the following areas:
- Service/Maintenance Technician for domestic appliances in Reputed Companies
- Winder of Electrical Motors in winding shop
- Contractor for domestic wiring and industrial wiring
- Armature winder of Electrical fans and motors
- Electrical appliance repair in electrical shops
- Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
- Local Electricity Board
- Assembler of Electrical control Gears
- Telephone Department
- Installation and Testing division of Auditorium and Cinema Hall
- Factories
- As Instructor in Govt./Private ITI/ITC
- Merchant Navy
- Indian Air Force
- Self-Employment in Service Centre
Plumber
ITI trade Plumber is powered by NCVT. ITI trade Plumber is a job oriented trade ITI trade Plumber is suitable for government job and private job. This ITI trade Plumber is very powerful for self-empowerment. This ITI trade Plumber is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Plumber trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional - skills and knowledge, while Core area (Workshop Calculation science, Engineering Drawing and Employability Skills) imparts requisite core skills, knowledge and life skills. After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.
Plumber assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Responsible for installation, operation and repair of plumbing system used in housing, commercial and institutional setups, drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc., maintenance and servicing of pipes and sanitary fixtures.
Plumber has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:
- Plumber, General
- Plumber, Operations
- Plumber, General-Installation and Repair
- Plumber, General Helper
- Plumber, General Assistant
- Plumber, Maintenance and Servicing Assistant
- Plumber, Maintenance and Servicing
- Pipe Layer/Plumber Pipeline
- Pipe Fitter
- Plumbers and Pipe Fitters, Other
- Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant
- Plumber (Welder) Assistant
- Plumber (Pumps and E/M Mechanic)
JOB ROLE
Plumber, General; lays out, assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Receives instructions from Sanitary Engineer or Civil Engineer regarding lay out of pipes, gas or water mains, position of fixtures and fittings, etc. Examines drawings or other specifications regarding size and dimensions of area where sanitary fittings or pipe are to be fitted or laid. Marks points at places to indicate position for fixing brackets and laying pipes. Drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc. to keep or hold fittings and fixtures in position, using nuts, bolts, clamps etc. and tightens them with hand tools. Cuts reams, threads and bends pipes as appropriate. Ensures that pipe lines are laid properly by Pipe Fitter. Joins pipes with sockets, Tees, elbow etc. or with molten lead or lead wool. Caulks joints (operation of making joint seam tight to withstand pressure) and tests them for leaks with pneumatic or hydraulic pressure. May repair and maintain sewerage and pipe lines by replacing washers on leaky faucets, mending burst pipes, opening clogged drains, etc. May do lead burning, dressing and bossing of lead pipe and sheet lead, inlaying of wooden tanks, construction of septic tanks etc
Plumber, Operations; is responsible for operation of plumbing system used in housing, commercial and institutional setups.
Plumber, General-Installation and Repair; Plumber (General)-II is responsible for installation and repair plumbing systems including those of advanced sanitary fixtures as per manufacturer͛s specifications in housing, commercial and institutional setups.
Plumber, General Helper; is responsible for helping Plumber (General) by carrying and handling of tools and materials required in installation, minor repair and maintenance of plumbing systems.
Plumber, General Assistant; is responsible for assistance in, preliminary installation and minor repair work of basic plumbing systems in domestic, commercial and institutional setups.
Plumber, Maintenance and Servicing Assistant; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.
Plumber, Maintenance and Servicing; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.
Pipe Layer/Plumber Pipeline; Sewer Pipe Layer lays concrete, stone ware or clay pipes to form sanitary drains and sewers. Receives instructions regarding size and type of concrete, stone ware or clay pipe to be laid. Digs or gets earth dug along marked lines using spade, picks etc. to make trenches for laying pipes. Levels and smoothens bottom of trenches to proper gradient by scooping with shovels. Receives pipes of required size lowered into trench manually or by pulley and adjusts their position by hand or crow-bar for correct levelling and vertical and horizontal alignment. Joints pipes together using appropriate couplings, joints, rings etc. and closes joints by caulking with fibre and cement to prevent leakage. Tests joints by hydraulic or pneumatic pressure after sealing. Fills trench with earth to cover laid pipe and rams earth to avoid sinking. Is designated as PIPE LAYER WATERMAINS or WATER MAINS FITTER if engaged in laying cast iron or galvanized iron water pipe mains and in caulking their joints with lead to prevent leakage. May lay pipe lines to provide water connection to houses, sanitary sewers etc. May fix meters to stopcocks, remove defects from pipe lines and replace defective ones.
Pipe Fitter; lays, repairs and maintains, pipes for supply of water, gas, oil or steam in buildings, gardens, workshops, stores, ships etc., according to drawings or instructions. Examines drawings and other specifications or receives relevant instructions. Cuts passage holes for laying pipes in walls and floors. Cuts reams, threads and bends pipes according to specifications. Lays pipes in cut passage and assembles pipe sections with couplings, sockets, Tee's elbows etc. Levels position of pipes using sprit level for gravitational flow. Caulks joints, tests them for leakage with pneumatic or hydraulic pressure and secures pipe line to structure with clamps, brackets, and hangers. Fits water meters, taps etc. to pipe where necessary. Repairs and replaces leaky pipe lines, taps and joints and provides connections to overhead water tanks. Helps Plumber, General in fittings sanitary fittings to buildings. May join pipe sections and fittings.
Plumbers and Pipe Fitters, Other; perform number of routine and low skilled tasks such as assisting in laying pipes, making water tight joints, fitting sockets and reducers, threading pipes with taps and dies, removing leakages, etc., and are designated as Plumber Mate or Pipe Fitter Helper according to type of work done.
Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant; is responsible for welding activities related to plumbing works in housing, commercial and institutional setups.
Plumber (Welder) Assistant; is responsible for assistance in welding activities related to plumbing works in housing, commercial and institutional setups.
Plumber (Pumps and E/M Mechanic); is responsible for installation and repair of Pumps and E/M equipment used for different plumbing applications of housing, commercial and institutional Set ups.
Sewing Technology
ITI trade Sewing Technology is powered by NCVT. ITI trade Sewing Technology is a job oriented trade ITI trade Sewing Technology is suitable for government job and private job. This ITI trade Sewing Technology is very powerful for self-empowerment. This ITI trade Sewing Technology is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
A trainee of the course ‘Sewing Technology’ constructs Sari Petticoat, Ladies’ Top/Short Kurthies, Ladies’ Suit, Nightwear (One Piece with Yoke), Nightwear (Two Piece – Night suit), Sari Blouse (Simple Model - Plain), Dress for a Newborn (Jhabla), Dress for a Toddler (Sun Suit), Dress for Kids (Frock), Dress for Kids (Frock), Gent’s, Casual Shirt, and Gent’s Trousers, according the sketched designs. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Assistant to Designer, Assistant worker in Boutique, Assistant to Sample Garment Designer and Assistant to Garment Sample Coordinator
The qualification gives access to jobs such as Sewing Machine operator, Assistant to Designer, Assistant worker in Boutique, Assistant to Sample Garment Designer and Assistant to Garment Sample Coordinator
Stenographer & Secretarial Assistant (English)
ITI trade Stenographer & Secretarial Assistant (English) is powered by NCVT. ITI trade Stenographer & Secretarial Assistant (English) is a job oriented trade ITI trade Stenographer & Secretarial Assistant (English) is suitable for government job and private job. This ITI trade Stenographer & Secretarial Assistant (English) is very powerful for self-empowerment. This ITI trade Stenographer & Secretarial Assistant (English) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Stenographer Secretarial Assistant (English) trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while the core area (Employability Skill) imparts requisite core skills, knowledge, and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.
Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the senior
Stenographer Secretarial Assistant (English)
has a wide scope of Employability ranging from self-employment, contractual employment. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:
- Private Secretary
- Personal Secretary
- Secretaries, Other
JOB ROLE
Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the boss. Following are the job roles for a Stenographer Secretarial Assistant (English):
- Correspond through emails, phone and faxes
- Maintaining and updating filing systems
- Coordinating with department heads to ensure smooth working of the organization
- Handling day-to-day administrative duties of the organization
- Making arrangement for meetings, conference and seminars
- Handling various activities within and outside the organization
- Taking dictation in shorthand and operating typewriter for transcribing dictated materials
- Handled and maintained correspondence files and other official documents
- Made travel bookings for domestic and international services
- Drafted business letters in clear and precise manner for easy understanding
- Coordinated business meetings and wrote minutes of meetings in shorthand
- Handled confidential information of the organization
- Prepared reports and documents for inter-department
- Handled day-to-day activities of the organization
- Prepared various presentations for the management team
Welder
ITI trade Welder is powered by NCVT. ITI trade Welder is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc
ITI Student Resume Portal
रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं
ITI Student Resume
ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं
