Government Industrial Training Institute Talwara

get iti website @ 1800/-

 

 

Government Industrial Training Institute Talwara is situated in Hoshiarpur Punjab. Government Industrial Training Institute Talwara is Industrial Training Institute under NCVT Government Industrial Training Institute Talwara. Location of Government Industrial Training Institute Talwara is Sector-3 Talwara T/ Ship Hoshiarpur Punjab.

Institute Type: 

Government ITI

Government ITI is leading educational organisatin in india. Teching facualty of Government ITI is suprimo. ITI is  providing latest Job oriened cource for student. This Government ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme .

Estd: 
01-Aug-1963
ITI code: 
GU03000050
Contact No: 
1883236031
Address: 
Sector-3 Talwara T/ Ship
Punjab District: 
Pin Code: 
144216
State: 
Punjab
State: 

Punjab

The Department of Technical Education & Industrial Training was created on 10.06.1977 in its present form after detaching the Technical Education Wing from the Department of Punjab, P.W.D. (B&R) and detaching the Industrial Training Wing from the Department of industries thereby bringing both the wings under one umbrella though each of these two wings are more than 50 years old.

The Industrial Training Wing of Department of Technical Education and Industrial Training has been entrusted with the responsibility of imparting vocational training in Engineering and non-engineering trades under craftsman training scheme & Applied training scheme to cater the need of the industry in respect of skilled workers. All the Industrial Training Institutes centre work under Craftsman Training Scheme of Government of India, Director - General Employment & Training under the directions of National Council of Vocational Training which is the apex body at Government of India level for coordinating development of Vocational Training in the country. Similar to the National Council for Vocational Training at Central level, State Council for Vocational Training the State level is responsible for coordinating an integrated development of Vocational Training

Reff: https://itipunjab.nic.in/genregsys/Candidate/Default.aspx

Trade: 

Carpenter

ITI trade Carpenter
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Carpenter is powered by NCVT.  ITI trade Carpenter  is a job oriented trade ITI trade Carpenter is suitable for government job and private job. This ITI trade Carpenter is very powerful for self-empowerment. This ITI trade Carpenter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Carpenter has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Carpenter
  • Carpenter Construction

Draughtsman (Civil)

ITI trade Draughtsman (Civil)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Draughtsman (Civil) is powered by NCVT.  ITI trade Draughtsman (Civil)  is a job oriented trade ITI trade Draughtsman (Civil) is suitable for government job and private job. This ITI trade Draughtsman (Civil) is very powerful for self-empowerment. This ITI trade Draughtsman (Civil) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

This course is meant for the candidates who aspire to become Civil Draughtsmen whose job roles include planning and drawing sketches of residential buildings from given data, preparing working drawings of all types of buildings from line sketches in CAD, Planning, drawing, estimating, and costing of civil work, drawing plans by using CAD, and making of 3D models of civil work. Giving setting out of site, supervision of civil work etc.

International Comparability

  • Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education.
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering after which they will be employed in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed preferably in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the trade for becoming instructor in ITIs.

Electrician

ITI trade Electrician
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Electrician is powered by NCVT.  ITI trade Electrician  is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

  • Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. 
  •  After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board. 
  • They can set up their own Rewinding and servicing of Domestic Equipment shop.  
  • Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various  Industries etc
  • They can also go for further higher studies after successful completion of course.
  • Students who have completed this course have found employment in the following areas:
  • Service/Maintenance Technician for domestic appliances in Reputed Companies
  • Winder of Electrical Motors in winding shop
  • Contractor for domestic wiring and industrial wiring
  • Armature winder of Electrical fans and motors
  • Electrical appliance repair in electrical shops
  • Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
  • Local Electricity Board
  • Assembler of Electrical control Gears
  • Telephone Department
  • Installation and Testing division of Auditorium and Cinema Hall
  • Factories
  • As Instructor in Govt./Private ITI/ITC
  • Merchant Navy
  • Indian Air Force
  • Self-Employment in Service Centre

Fitter

ITI trade Fitter
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Fitter is powered by NCVT.  ITI trade Fitter  is a job oriented trade ITI trade Fitter is suitable for government job and private job. This ITI trade Fitter is very powerful for self-empowerment. This ITI trade Fitter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Fitters have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the following industries:

  • Production & Manufacturing industries.
  • Structural Fabrication like bridges, Roof structures, Building & construction.
  • Automobile and allied industries
  • Service industries like road transportation and Railways.
  • Ship building and repair
  • Infrastructure and defence organizations
  • In public sector industries like BHEL, BEML, NTPC, etc and private industries in India & abroad.
  • Self employment

International Comparability

  • Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.
     

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Machinist

ITI trade Machinist
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Machinist is powered by NCVT.  ITI trade Machinist  is a job oriented trade ITI trade Machinist is suitable for government job and private job. This ITI trade Machinist is very powerful for self-empowerment. This ITI trade Machinist is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:
• Machinist, Grinder, Operator of various types of power driven metal cutting or grinding machines in Production & Manufacturing industries,Infrastructure and defence organizations.
• Machinists have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.

International Comparability

  • 1. Comparison Made with German Syllabus and the proposed syllabus is in line with the existing German Syllabus (Around 95% contents are matching).
  • 2. However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can become supervisor after doing part-time diploma in relevant branch of Engineering.
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Mechanic (Motor Vehicle)

ITI trade Mechanic (Motor Vehicle)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Motor Vehicle) is powered by NCVT.  ITI trade Mechanic (Motor Vehicle)  is a job oriented trade ITI trade Mechanic (Motor Vehicle) is suitable for government job and private job. This ITI trade Mechanic (Motor Vehicle) is very powerful for self-empowerment. This ITI trade Mechanic (Motor Vehicle) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Installs, tests, maintains, repairs and replaces electrical Power distribution/power line equipments and fittings in factories, workshops, power house, business and residential premises etc. Manipulates controls to adjust and activate those equipments. Monitors and records control board/room readings, examines faults in control room and repairs substation equipments and panels to ensure proper operational efficiency.   
Mechanic Motor Vehicle (MMV) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Motor Vehicle Mechanics, Other 
  • Mechanic, Automobile 
  • Maintenance Technician – Service 
  • Workshop 
  • Auto Service Technician – Mechanic 
  • Fitter Automobile
     

Mechanic (Refrigeration and Air-Conditioning)

Mechanic (Refrigeration and Air-Conditioning)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Refrigeration and Air-Conditioning) is powered by NCVT.  ITI trade Mechanic (Refrigeration and Air-Conditioning)  is a job oriented trade ITI trade Mechanic (Refrigeration and Air-Conditioning) is suitable for government job and private job. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is very powerful for self-empowerment. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic (Tractor)

ITI trade Mechanic (Tractor)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Tractor) is powered by NCVT.  ITI trade Mechanic (Tractor)  is a job oriented trade ITI trade Mechanic (Tractor) is suitable for government job and private job. This ITI trade Mechanic (Tractor) is very powerful for self-empowerment. This ITI trade Mechanic (Tractor) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The trainee attending the course on ‘Mechanic Tractor’ shall be able to perform basic fitting , grinding, surface finishing, sheet metal, bending, and welding operations and carry out electrical/electronic, nondestructive, and battery tests, in an tractor workshop. The trainee shall be able to service cooling and lubrication systems, intake and exhaust systems, and fuel feed system, of the tractor. The trainee shall also be able to overhaul diesel engine, clutch and gearbox, differential and PTO Unit, steering system, assemblies of power tiller, implements, and charging and starting systems, of the tractor. 
Mechanic Tractor repairs and overhauls tractors by various mechanical processes for agriculture, constructional and other heavy duties

Trade Syllabus (Practical): 

Trade Practical (27 Hrs/week)

Familiarisation with institute, Job opportunities in the automobile sector, Machinery used in Trade. Types of work done by the students in the shop floor.

Practical related to Safety and Health, Importance of maintenance and cleanliness of Workshop. Interaction with health centre and fire service station to provide demo on First aid and Fire safety, Use of fire extinguishers. Demonstration on safe handling and Periodic testing of lifting equipment, and Safety disposal of Used engine oil. Energy saving Tips of ITI electricity Usage

Practice using all marking aids, like steel rule with spring calipers, dividers, scriber, punches, Chisel etc., Layout a work piece- for line, circle, arcs and circles. Practice to measure a wheel base of a vehicle with measuring tape. Practice to measure valve spring tension using spring tension tester Practice to remove wheel lug nuts with use of an air impact wrench Practice on General workshop tools & power tools.

Measuring practice on Cam height, Camshaft Journal dia, crankshaft journal dia, Valve stem dia, piston diameter, and piston pin dia with outside Micrometers. Measuring practice on the height of the rotor of an oil pump from the surface of the housing or any other auto component measurement with depth micrometer. Measuring practice on valve spring free length. Measuring practice on cylinder bore, Connecting rod bore, inside diameter (ID) of a camshaft bearing with Telescope gauges. Measuring practice on cylinder bore for taper and out-of-round with Dial bore gauges. Measuring practice to measure wear on crankshaft end play, crankshaft run out, and valve guide with dial indicator. Measuring practice to check the flatness of the cylinder head is warped or twisted with straightedge is used with a feeler gauge. Measuring practice to check the end gap of a piston ring, piston-tocylinder wall clearance with feeler gauge. Practice to check engine manifold vacuum with vacuum gauge. Practice to check the air pressure inside the vehicle tires is maintained at the recommended setting

Practice on General cleaning, checking and use of nut, bolts, & studs etc., Removal of stud/bolt from blind hole. Practice on cutting tools like Hacksaw, file, chisel, Sharpening of Chisels, center punch, safety precautions while grinding. Practice on Hacksawing and filing to given dimensions.

Practice on Marking and Drilling clear and Blind Holes, Sharpening of Twist Drills Safety precautions to be observed while using a drilling machine. Practice on Tapping a Clear and Blind Hole, Selection of tape drill Size, use of Lubrication, Use of stud extractor. Cutting Threads on a Bolt/ Stud. Adjustment of two piece Die, Reaming a hole/ Bush to suit the given pin/ shaft, scraping a given machined surface.

Practice on making Rectangular Tray. Pipe bending, Fitting nipples unions in pipes. Soldering and Brazing of Pipes.

Practice in joining wires using soldering Iron, Construction of simple electrical circuits, Measuring of current, voltage and resistance using digital multimeter, practice continuity test for fuses, jumper wires, fusible links, circuit breakers.

Diagnose series, parallel, seriesparallel circuits using Ohm’s law, Check electrical circuit with a test lamp, perform voltage drop test in circuits using multimeter, measure current flow using multimeter /ammeter, use of service manual wiring diagram for troubleshooting.

Cleaning and topping up of a lead acid battery, Testing battery with hydrometer, Connecting battery to a charger for battery charging, Inspecting & testing a battery after charging, Measure and Diagnose the cause(s) of excessive Key-off battery drain (parasitic draw) and do corrective action. Testing of relay and solenoids and its circuit.

Identify and test power and signal connectors for continuity, Identify and test different type of Diodes, NPN & PNP Transistors for its functionality, Construct and test simple logic circuits OR, AND & NOT and Logic gates using switches.

Practice to make straight beads and Butt, Lap & T joints Manual Metal Arc Welding. Setting of Gas welding flames, practice to make a straight beads and joints Oxy – Acetylene welding Film on Heat treatment process

Practice on Liquid penetrant testing method and Magnetic particle testing method. Identification of Hydraulic and pneumatic components used in vehicle. Tracing of hydraulic circuit on hydraulic jack, hydraulic power steering, and Brake circuit. Identification of components in Air brake systems. 

 

 

Mechanic Consumer Electronics Appliances

Mechanic Consumer Electronics Appliances
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Mechanic Consumer Electronics Appliances is powered by NCVT.  ITI trade Mechanic Consumer Electronics Appliances  is a job oriented trade ITI trade Mechanic Consumer Electronics Appliances is suitable for government job and private job. This ITI trade Mechanic Consumer Electronics Appliances is very powerful for self-empowerment. This ITI trade Mechanic Consumer Electronics Appliances is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The Mechanic Consumer Electronic Appliances trade under CTS is one of the popular newly designed courses. The earlier course was Mechanic Consumer Electronics. The course is of two years (04 semester) duration. It mainly consists of trade (skills and knowledge) and Core area (Workshop Calculation & Science, Engineering Drawing and Employability Skills). After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Brief description of job roles:

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics Mechanic; Electronic Equipment Mechanic repairs electronic equipment, such as computers, industrial controls, transmitters, and telemetering control systems following blueprints and manufacturer's specifications and using hand tools and test instruments. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work checks the installation site, understands the layout requirement as per design, assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.

Optical Fibre Technician is responsible for maintaining uptime and quality of the network segment (both optical media and equipment) assigned to him by undertaking periodic preventive maintenance activities and ensuring effective fault management in case of fault occurrence. He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF) as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS Repair Technician’, this is an after sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual also and interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.

Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole, using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools, test equipment.

Television Repair Technician job role is applicable to both Television manufacturing facilities as well as electronics service centres. This role pertains to rectifying faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.

DTH Set-Top Box Installer and Service Technician installs set-top boxes and provides after sales service for Direct to Home (DTH) system. The individual at work installs the set-top box at customers’ premises; addresses the field serviceable complaints and co-ordinates with the technical team for activation of new connections

Field Technician, Washing Machine is also, called ‘Washing Machine Repair Technician’. This job is about providing after sales service to customers. The individual at work installs the washing machine, interacts with customers to diagnose the problem and assesses possible causes of fault reported. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.

Field Technician, Other Home Appliances is also called, ‘Home Appliance Repair Technician’, this is an after sales service job for installing and providing support to the water purifier, mixer/grinder buyers. The individual at work installs the appliance and interacts with customers to diagnose the problem and possible causes. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.

Access Controls Installation Technician: Also called ‘Access Control Device Installer’, the Access Control Installation Technician provides after sale support services for access control devices and systems such as point of sale scanners, finger print or iris scan. The individual at work is responsible for installing the access control system at the customer’s premises. The individual undertakes site assessment, installs the hardware and integrates the system to meet customer’s requirement.

Field Engineer TV is also called, ‘Service Engineer – TV’, the TV Field Engineer provides installation and after sales service to buyers of TV and other consumer electronic products such as home theatre system, DVD and Blu-ray players, audio systems, headphones etc. The individual at work interacts with customers to install the entertainment system and diagnose any problems to assess possible causes of malfunction. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Mechanic Diesel

ITI trade Mechanic Diesel
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic Diesel is powered by NCVT.  ITI trade Mechanic Diesel  is a job oriented trade ITI trade Mechanic Diesel is suitable for government job and private job. This ITI trade Mechanic Diesel is very powerful for self-empowerment. This ITI trade Mechanic Diesel is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Repairs, services and overhauls diesel or oil engines for efficient performance as prime mover to drive different machineries and equipments. Examines engine by dismantling it for locating defects and for necessary repair/replacement and then reassemble it ensuring accuracy of fittings and performance as per specified standards. Checks, adjusts and lubricates engine periodically and performs such other functions to keep engine in good working order. 

On successful completion of this course the candidates shall be gainfully employed as:

  • 1. Mechanic of Diesel Engine, Oil Engine in Automobile Industries
  • 2. Fitter of diesel or oil engines
  • 3. Self-Employment
  • 4. Instructor of Diesel Mechanic after doing CITS course under NCVT

Mechanic Diesel has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Mechanic
  • Diesel Engine.

Mechanic Radio & T.V.

ITI trade Mechanic Radio & T.V.
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic Radio & T.V. is powered by NCVT.  ITI trade Mechanic Radio & T.V.  is a job oriented trade ITI trade Mechanic Radio & T.V. is suitable for government job and private job. This ITI trade Mechanic Radio & T.V. is very powerful for self-empowerment. This ITI trade Mechanic Radio & T.V. is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Refrigeration and Air Conditioning Technician

Refrigeration and Air Conditioning
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade REFRIGERATION AND AIR CONDITIONING is powered by NCVT.  ITI trade REFRIGERATION AND AIR CONDITIONING  is a job oriented trade ITI trade REFRIGERATION AND AIR CONDITIONING is suitable for government job and private job. This ITI trade REFRIGERATION AND AIR CONDITIONING is very powerful for self-empowerment. This ITI trade REFRIGERATION AND AIR CONDITIONING is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic Refrigeration & Air Conditioning has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

 

  • Domestic Refrigeration and Air Conditioning
  • Commercial Refrigeration and Air conditioning
  • Mechanic, Refrigeration & Air Conditioning

Sewing Technology

Sewing Technology
Trades Duration: 
One year
Trade Type: 
Non Engineering

ITI trade Sewing Technology is powered by NCVT.  ITI trade Sewing Technology  is a job oriented trade ITI trade Sewing Technology is suitable for government job and private job. This ITI trade Sewing Technology is very powerful for self-empowerment. This ITI trade Sewing Technology is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Sewing Technology’ constructs Sari Petticoat, Ladies’ Top/Short Kurthies, Ladies’ Suit, Nightwear (One Piece with Yoke), Nightwear (Two Piece – Night suit), Sari Blouse (Simple Model - Plain), Dress for a Newborn (Jhabla), Dress for a Toddler (Sun Suit), Dress for Kids (Frock), Dress for Kids (Frock), Gent’s, Casual Shirt, and Gent’s Trousers, according the sketched designs. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Assistant to Designer, Assistant worker in Boutique, Assistant to Sample Garment Designer and Assistant to Garment Sample Coordinator 

The qualification gives access to jobs such as Sewing Machine operator, Assistant to Designer, Assistant worker in Boutique, Assistant to Sample Garment Designer and Assistant to Garment Sample  Coordinator
 

Surface Ornamentation Techniques (Embroidery)

Surface Ornamentation Techniques (Embroidery)
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed
Trade Type: 
Non Engineering

ITI trade Surface Ornamentation Techniques (Embroidery) is powered by NCVT.  ITI trade Surface Ornamentation Techniques (Embroidery)  is a job oriented trade ITI trade Surface Ornamentation Techniques (Embroidery) is suitable for government job and private job. This ITI trade Surface Ornamentation Techniques (Embroidery) is very powerful for self-empowerment. This ITI trade Surface Ornamentation Techniques (Embroidery) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Surface Ornamentation Techniques (Embroidary)’ carries out typical embroidery works such as Drawn and Pulled Thread, Assisi, Cut, Swiss, and Shadow, and traditional embroidery works such as Phulkari, Kantha, Kasuti, Chikankari, Kashida, Chamba, and Kutch. The trainee also prepares fancy nets such as Cane weaving, Fancy net with Lazy Daisy, Fancy net with Cross Stitch, Fancy net with Circles, and Button hole net and carries out Appliqué work such as Simple Appliqué, Cut Appliqué, and Felt Appliqué. The course is meant for the candidates who aspire to become Tracing experts, Hand Embroider, Zig-Zag Machine Operator, Aari Embroider, Motif Maker, Entrepreneur & Design Coordinate to Fashion Designer 

The qualification gives access to jobs such as Tracing experts, Hand Embroider, Zig-Zag Machine Operator, Aari Embroider, Motif Maker, Entrepreneur & Design Coordinate to Fashion Designer

JOB ROLES

This course is meant for the candidates who aspire to become Tracing experts, Hand Embroider, ZigZag Machine Operator, Aari Embroider, Motif Maker, Entrepreneur & Design Coordinate to Fashion Designer.

Turner

ITI trade Turner
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Turner is powered by NCVT.  ITI trade Turner  is a job oriented trade ITI trade Turner is suitable for government job and private job. This ITI trade Turner is very powerful for self-empowerment. This ITI trade Turner is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion the passed out trainee

  • 1.  Can work in the industry as skilled turner.
  • 2. Can work in the field of basic fitting, lathe, drilling, Inspection & measurement observing safety precautions.
  • 3.  Can perform all the turning operations on lathe & perform simple programming & operations on a CNC lathe.
  • 4. Can handle different type of Fire extinguishers & personal protective equipment.

Welder

ITI trade Welder
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Welder is powered by NCVT.  ITI trade Welder  is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc

Map: 

ITI Student Resume Portal

रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं

ITI Student Resume

ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं

 

Search engine adsence