State Institute of Automotive & Driving Skills Pvt. ITI

get iti website @ 1800/-

 

 

State Institute of Automotive & Driving Skills Pvt. ITI is situated in Sri muktsar sahib Punjab. State Institute of Automotive & Driving Skills Pvt. ITI is Industrial Training Institute under NCVT State Institute of Automotive & Driving Skills Pvt. ITI. Location of State Institute of Automotive & Driving Skills Pvt. ITI is VPO. Mahuana Sri muktsar sahib Punjab.

Institute Type: 

Private ITI

Private ITI is leading educational organisatin in india. Teching facualty of Private ITI is suprimo. ITI is  providing latest Job oriened cource for student. This Private ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme . ITI is registered by government under NCVT .

Estd: 
01-Aug-2009
ITI code: 
PR03000217
Contact No: 
9478780082
Address: 
VPO. Mahuana
Punjab District: 
Pin Code: 
152107
State: 
Punjab
State: 

Punjab

The Department of Technical Education & Industrial Training was created on 10.06.1977 in its present form after detaching the Technical Education Wing from the Department of Punjab, P.W.D. (B&R) and detaching the Industrial Training Wing from the Department of industries thereby bringing both the wings under one umbrella though each of these two wings are more than 50 years old.

The Industrial Training Wing of Department of Technical Education and Industrial Training has been entrusted with the responsibility of imparting vocational training in Engineering and non-engineering trades under craftsman training scheme & Applied training scheme to cater the need of the industry in respect of skilled workers. All the Industrial Training Institutes centre work under Craftsman Training Scheme of Government of India, Director - General Employment & Training under the directions of National Council of Vocational Training which is the apex body at Government of India level for coordinating development of Vocational Training in the country. Similar to the National Council for Vocational Training at Central level, State Council for Vocational Training the State level is responsible for coordinating an integrated development of Vocational Training

Reff: https://itipunjab.nic.in/genregsys/Candidate/Default.aspx

Trade: 

Driver Cum Mechanic

ITI trade Driver Cum Mechanic
Trades Duration: 
6 Months
Trade Type: 
Non Engineering

ITI trade Driver Cum Mechanic is powered by NCVT.  ITI trade Driver Cum Mechanic  is a job oriented trade ITI trade Driver Cum Mechanic is suitable for government job and private job. This ITI trade Driver Cum Mechanic is very powerful for self-empowerment. This ITI trade Driver Cum Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

  • Driver cum Mechanic,drivesmotor car according to owner's requirement as paid employee. Observes road signals and traffic rules.
  • Driver cum Mechanic repairs to motor vehicles under guidance of Mechanic Motor vehicle (MMV). Receives instructions from Mechanic, Automobile about tasks to attend. Jacks up vehicle to  equired height for repair in convenient position where necessary.
  • Lubricates joints, tightens loose parts and makes necessary adjustments
  • Sets wheel alignment, adjust, steering, clutch, hand brakes, brake pedal etc fits new or repaired accessories and body parts, and performs other tasks to effect repairs
  • Carryout routine Maintenance of Battery and Ignition System
  • Carryout Tire Maintenance
  • Identify Computer Parts and operate the computer

A trainee after attending the course on ‘Driver cum Mechanic’ shall be able to drive motor car according to owner's requirement, observe road signals and traffic rules, repair motor vehicles under guidance of a Mechanic (Motor vehicle), jack up vehicle to the required height for repair in convenient position where necessary, lubricate joints, tighten loose parts and make necessary adjustments, set wheel alignment, adjust steering, clutch, hand brakes, brake pedal etc., fit new or repaired accessories and body parts, and carry out routine maintenance of battery and ignition systems, and tire. 

  • Driver cum Mechanic, drives motor car according to owner's requirement as paid employee. Observes road signals and traffic rules. 
  • Driver cum Mechanic repairs to motor vehicles under guidance of Mechanic Motor vehicle (MMV). Receives instructions from Mechanic, Automobile about tasks to attend.
     

Electronics Mechanic

ITI trade Electronics Mechanic
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Electronics Mechanic is powered by NCVT.  ITI trade Electronics Mechanic  is a job oriented trade ITI trade Electronics Mechanic is suitable for government job and private job. This ITI trade Electronics Mechanic is very powerful for self-empowerment. This ITI trade Electronics Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Brief description of job roles:

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis  or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics  Mechanic;  Electronic  Equipment  Mechanic  repairs  electronic  equipment,  such  as computers, industrial controls, transmitters, and telemetering control systems following blueprints and   manufacturer's   specifications   and   using   hand   tools   and   test   instruments.   Tests  faulty equipment  and  applies  knowledge  of  functional  operation  of  electronic  units  and  systems  to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Radio Technician (Radio Manufacturing) tests assembled radio sets with testing equipment to ensure that assembly soldering, frequency, performance, etc. are in accordance with prescribed standards. Places assembled radio set in position and visually examines it to ensure that position of components,  connections, soldering,  wiring,  etc.  are in order.  Switches  on and operates different knobs  to  check  calibration,  audibility  and  general  performance  of  set  by  varying  its  tone  and listening to various stations and frequencies. Tightens loose nuts and screws,  locates  faults,  replaces defective components and conducts necessary changes.  Approves  correctly  assembled sets for further processing and rejects defective ones for rectification. May tests sets at different stages of assembly. May service, repair and overhaul radio sets.

Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work  checks  the  installation  site,  understands  the  layout  requirement  as  per  design,  assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.

Optical  fibre  technician  is  responsible for  maintaining uptime and quality of the network segment (both   optical   media   and   equipment)   assigned   to   him   by   undertaking   periodic   preventive maintenance activities  and  ensuring  effective fault management in  case  of  fault occurrence.  He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF)  as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS repair Technician’, this is an  after  sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual  also  and  interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.

Television Installation Man installs and adjusts television receivers and antennas, using hand tools. Selects antenna according to type of set and location of transmitting station. Bolts cross arms and dipole elements in position to assemble antenna. Secures antenna in place with bracket and guy wires, observing insurance codes and local ordinances to protect installation  from  lighting  and other hazards. Drills and waterproofs holes in building to make passage for transmission line. Connects line between receiver and antenna and fastens it in place. Tunes receiver on all channels and adjusts  screws to obtain desired density, linearity, focus and size of picture. Orients antenna  and installs reflector to obtain strongest possible reception.

Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole,    using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools,  test equipment.

Television Service and Repairman repairs and adjusts radios and television receivers, using hand tools and electronic testing instruments. Tunes receiver on all channels and observes audio and video characteristics to locate source of trouble. Adjusts controls to obtain desired  density,  linearity, focus and size of picture. Examines chassis for defects. Tests voltages and resistance of circuits to isolate defect following schematic diagram and using voltmeter, oscilloscope, signal generator and other electronic testing instruments. Tests and changes tubes, solders loose connections and repairs or replaces defective parts, using hand tools and soldering iron. Repair radios and other audio equipment.

Television  Repair  Technician job role is applicable to both Television manufacturing facilities as  well as electronics service centres. This role pertains to rectify faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Mechanic (Motor Vehicle)

ITI trade Mechanic (Motor Vehicle)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Motor Vehicle) is powered by NCVT.  ITI trade Mechanic (Motor Vehicle)  is a job oriented trade ITI trade Mechanic (Motor Vehicle) is suitable for government job and private job. This ITI trade Mechanic (Motor Vehicle) is very powerful for self-empowerment. This ITI trade Mechanic (Motor Vehicle) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Installs, tests, maintains, repairs and replaces electrical Power distribution/power line equipments and fittings in factories, workshops, power house, business and residential premises etc. Manipulates controls to adjust and activate those equipments. Monitors and records control board/room readings, examines faults in control room and repairs substation equipments and panels to ensure proper operational efficiency.   
Mechanic Motor Vehicle (MMV) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Motor Vehicle Mechanics, Other 
  • Mechanic, Automobile 
  • Maintenance Technician – Service 
  • Workshop 
  • Auto Service Technician – Mechanic 
  • Fitter Automobile
     

Mechanic (Refrigeration and Air-Conditioning)

Mechanic (Refrigeration and Air-Conditioning)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Refrigeration and Air-Conditioning) is powered by NCVT.  ITI trade Mechanic (Refrigeration and Air-Conditioning)  is a job oriented trade ITI trade Mechanic (Refrigeration and Air-Conditioning) is suitable for government job and private job. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is very powerful for self-empowerment. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic Auto Electrical and Electronics

Mechanic Auto Electrical and Electronics
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Mechanic Auto Electrical and Electronics is powered by NCVT.  ITI trade Mechanic Auto Electrical and Electronics  is a job oriented trade ITI trade Mechanic Auto Electrical and Electronics is suitable for government job and private job. This ITI trade Mechanic Auto Electrical and Electronics is very powerful for self-empowerment. This ITI trade Mechanic Auto Electrical and Electronics is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion of the above course, the trainee shall be able to perform the following skills with proper sequence.

Installs, repairs replaces and overhauls wiring, starters, generators, distributors and other electrical equipment of motor vehicles.

  • Examines vehicle battery, checks voltage and specific gravity using special equipment such as voltmeter hydrometer, heavy discharge tester, etc. and ensures that battery is in good condition.
  • Checks vehicle wiring, locates faults and rectifies defects by replacing damaged wire or connecting ends with insulation tape.
  • Starts engine to check whether alternator is charging correctly, and if distributor, condenser coil and cut out are functioning properly.
  • Estimates nature of defects and reports components to be replaced or repaired.
  • Dismantles and repairs electrical units and components such s generator, distributor etc. where required.
  • Replaces repaired kit or unit in vehicle and connects it with battery.
  • Conducts thorough examination of various electrical fittings such as lights, panel indicators, fuel pumps, etc and rectifies defects.
  • Checks condition and makes necessary adjustments. May do armature winding. May drive vehicles on road. May charge batteries.
  • Fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use.
  • Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; Installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment;
  • Dismantles equipment if required and replaces faulty parts or wiring

Mechanic Diesel

ITI trade Mechanic Diesel
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic Diesel is powered by NCVT.  ITI trade Mechanic Diesel  is a job oriented trade ITI trade Mechanic Diesel is suitable for government job and private job. This ITI trade Mechanic Diesel is very powerful for self-empowerment. This ITI trade Mechanic Diesel is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Repairs, services and overhauls diesel or oil engines for efficient performance as prime mover to drive different machineries and equipments. Examines engine by dismantling it for locating defects and for necessary repair/replacement and then reassemble it ensuring accuracy of fittings and performance as per specified standards. Checks, adjusts and lubricates engine periodically and performs such other functions to keep engine in good working order. 

On successful completion of this course the candidates shall be gainfully employed as:

  • 1. Mechanic of Diesel Engine, Oil Engine in Automobile Industries
  • 2. Fitter of diesel or oil engines
  • 3. Self-Employment
  • 4. Instructor of Diesel Mechanic after doing CITS course under NCVT

Mechanic Diesel has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Mechanic
  • Diesel Engine.

Welder

ITI trade Welder
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Welder is powered by NCVT.  ITI trade Welder  is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc

Map: 

ITI Student Resume Portal

रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं

ITI Student Resume

ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं

 

Search engine adsence