Course Content: During the two-year duration a candidate is trained on subjects Professional Skill, Professional Knowledge, Engineering Drawing, Workshop Science & Calculation and Employability Skills. In addition to this a candidate is entrusted to make/do project work and Extra Curricular Activities to build up confidence. The practical skills are imparted in simple to complex manner & simultaneously theory subject is taught in the same fashion to apply cognitive knowledge while executing task. The practical part starts with allied trade training viz basic fitting and laboratory experiments in basic physics and chemistry. Practical skills related to unit operations comprising of Fluid flow, Heat transfer, and Mass transfer, Mechanical operations are covered in period of two years.

In the first year -The practical part starts with allied trades viz., basic fitting- In the basic fitting the skills imparted are Hack-sawing, marking, punching, Chiseling, Filing, Drilling, countersinking,counter boring, reaming, Taping and observation of all safety aspects is mandatory. Basic physics and chemistry practical covers conducting experiments in laboratory to determine physical constants, verification of laws, to determine concentration of solutions, PH, melting point, boiling point, compare properties of metals & alloys, prepare chemicals. The safety aspect covers components like PPE, Fire extinguisher, First Aid. performing different operations or experiments related to safety and general awareness in chemical industry. Identification, installation /connection of instrument/devices to measure pressure, temperature, flow, level and density are covered. Skills to execute pipe joints, fittings valves on pipes, dismantling, overhauling, cleaning & assembling valves, different machines & components used for fluid transportation such as centrifugal pump, gear pump, metering pump, screw pump, multistage compressor are achieved in this year. Dismantling, repairing and assembling of different damaged mechanical components used for power transmission such as Gearbox, bearings are also covered.

In the second year – This Year covers Unit operations i.e. fluid flow, heat transfer and mass transfer operations. Skills to operate different machines/equipment such as Shell and tube Heat exchangers, evaporators, Distillation columns are gained in this section. Study of pressure vessels, petroleum refining is covered in this section. Mass transfer operations such as Solvent extraction, Leaching, Absorption, Crystallization, and Drying are taught. Mechanical operations such as Size reduction, mixing, conveying, and filtration are also covered in this year. Study of chemical reactor, plant utilities like steam, Boilers, cooling towers, chilled water, instrument air are covered in this section. Pollution in chemical industry and manufacturing processes are also taught

Skills acquired: Laboratory Assistant- Physical/chemical, assists and carries out routine duties in laboratory as directed in conducting experiments. Sets up required apparatus and instruments in position as directed for conducting experiments such as balances, heaters, arrange chemicals such as salts, acids, Makes necessary electrical connection to equipment and instruments as required. Records routine and other observations as indicated by instruments and makes necessary calculations.

Process Operator - Chemical, Process chemical ingredients by mixing in specific proportions, heating, distilling, cooling, filtering, blending, percolating, refining, pulverising, etc. for causing chemical reactions for research or production. Regulates feed of gaseous, liquid or solid materials into equipment. Checks progress of process by looking through peep holes, observing temperature readings, pressure gauges and other instruments and making simple chemical tests; regulates material feed, and heating and cooling devices and makes other adjustments necessary to ensure that processes are correctly carried out

Reactor / Converter Operator , Reactor Operator (Chemical Process, except Petroleum) operates number of pieces of equipment, other than those used for treating petroleum, which perform sequence of complex operations in chemical reaction process. Regulates feed of gaseous, liquid or solid material into equipment.

Pump Operator (Petroleum Refining), controls pumps and manifold systems to circulate crude, semi compressed and finished petroleum products, water and chemical solutions through processing and storage departments of refinery according to schedules or instructions. Synchronizes activities with other pump houses to assure continuous flow of product. Records operating data.

Evaporator Operator: Pan Operator; Vacuum Pan Operator charges and operates evaporating tank, vacuum-pan or similar device to concentrate solutions by driving off excess water contents. regulates flow of steam into heater coils of evaporator; periodically tests concentrations of solution by making simple chemical tests

Still Operator- Petroleum/chemical, still operator (Distillation operator) operates one or more batch/ continuous stills for distilling or refining Chemicals and crude oil to obtain fuel gas, gasoline, kerosene, diesel oil, lubricating oil, wax, bitumen, etc. Reads processing schedules, writing log books, test results of oil samples, and laboratory recommendations to determine changes in equipment controls required to produce specified quantity and quality of product

Crusher Operator, Crusher Operator operates power driven crushing machine to break solid lumps of chemicals or other materials into smaller size for further processing. Collects material to be crushed; fills hopper of machine, regulate speed of machine, May weigh the material before and after crushing to know loss in crushing.

Autoclave Operator, Autoclave Operator; Sterilization Attendant charges, operates and unloads an autoclave (high-pressure vessel) for processing chemicals, oils, or sterilizing bottles, ampoules, etc. Checks valves for operation; raises temperature of autoclave by increasing steam pressure

Ammonia Plant Operator, Ammonia Plant Operator controls converter and auxiliary equipment that combine hydrogen and nitrogen to produce anhydrous ammonia, Lights burner and start pumps, compressors etc. Reads instruments such as temperature indicators, pressure gauges etc.

Acid Plant Operator Acid Plant Operator maintains and operates acid plant for manufacturing sulphuric, hydrochloric, nitric or other acids by treating raw materials (Sculpture, salts, etc.)

Digester Operator, Paper Pulp Digester Operator operates (cooker) to convert raw materials into paper pulp. Supervises charging of cooker with ingredients such as wood chips, rags, straw and waste paper shreds.Directs adding of chemicals and admission of steam to raise temperature.

Mixing Attendant (Chemical) feeds and tends machine to mix and blend different solid or liquid ingredients in required proportions. starts machine agitators to mix materials thoroughly

Filter Press Operator operates filter press machine to filter impurities or other insoluble materials from slurries, chemical solutions or other liquids. Opens filter press and covers filter plates with canvas or other filtering media; closes press, pumps slurry till specified pressure is reached. Removes impurities and sludge in between plates. Replaces damaged filter media.

Hydro Extractor Operator /Centrifuge operator operates centrifuge machine that separates solids from liquids, Fills drum of machine with liquid material. Starts machine and adjusts drum speed to obtain efficient separation of substances, May clean and fix filtering media.

Drying Chamber Attendant (Drugs)/Dryer Operator dries tablets, wet seeds, wet crystals and powder in drying chamber. loads tablets and powder trays on racks and shelves in drying chamber, loads seeds and crystals in rotary dryers, Closes chamber and applies heat for fixed period of time; checks at frequent intervals to ensure that products are properly dried and test products for moisture content

Extraction Attendant-Chemical, Extraction Battery Attendant, Extractor Operator, feeds necessary chemicals and solvents in Mixer settlers, spray towers and regulates flow, pressure etc. as directed by Process man to effect desired chemical separation. Collects Extract, Raffinate separately, and checks their concentration separately.

Options for employment: All Chemical, Fertilizer, Pharmaceutical and Petroleum (Oil and Gas) and Power Plants (Water treatment) will be able to recruit these trainees.

ITI trade Electrician is powered by NCVT.  ITI trade Electrician  is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

• Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. 
•  After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board. 
• They can set up their own Rewinding and servicing of Domestic Equipment shop.  
• Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various  Industries etc
• They can also go for further higher studies after successful completion of course.
• Students who have completed this course have found employment in the following areas:
• Service/Maintenance Technician for domestic appliances in Reputed Companies
• Winder of Electrical Motors in winding shop
• Contractor for domestic wiring and industrial wiring
• Armature winder of Electrical fans and motors
• Electrical appliance repair in electrical shops
• Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
• Local Electricity Board
• Assembler of Electrical control Gears
• Telephone Department
• Installation and Testing division of Auditorium and Cinema Hall
• Factories
• As Instructor in Govt./Private ITI/ITC
• Merchant Navy
• Indian Air Force
• Self-Employment in Service Centre

ITI trade Machinist is powered by NCVT.  ITI trade Machinist  is a job oriented trade ITI trade Machinist is suitable for government job and private job. This ITI trade Machinist is very powerful for self-empowerment. This ITI trade Machinist is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:
• Machinist, Grinder, Operator of various types of power driven metal cutting or grinding machines in Production & Manufacturing industries,Infrastructure and defence organizations.
• Machinists have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.

International Comparability

• 1. Comparison Made with German Syllabus and the proposed syllabus is in line with the existing German Syllabus (Around 95% contents are matching).
• 2. However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

• Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
• Can take admission in diploma course in notified branches of Engineering by lateral entry
• Can become supervisor after doing part-time diploma in relevant branch of Engineering.
• Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
• Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

ITI trade Mechanic Diesel is powered by NCVT.  ITI trade Mechanic Diesel  is a job oriented trade ITI trade Mechanic Diesel is suitable for government job and private job. This ITI trade Mechanic Diesel is very powerful for self-empowerment. This ITI trade Mechanic Diesel is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Repairs, services and overhauls diesel or oil engines for efficient performance as prime mover to drive different machineries and equipments. Examines engine by dismantling it for locating defects and for necessary repair/replacement and then reassemble it ensuring accuracy of fittings and performance as per specified standards. Checks, adjusts and lubricates engine periodically and performs such other functions to keep engine in good working order. 

On successful completion of this course the candidates shall be gainfully employed as:

• 1. Mechanic of Diesel Engine, Oil Engine in Automobile Industries
• 2. Fitter of diesel or oil engines
• 3. Self-Employment
• 4. Instructor of Diesel Mechanic after doing CITS course under NCVT

Mechanic Diesel has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

• Mechanic
• Diesel Engine.

ITI trade Welder is powered by NCVT.  ITI trade Welder  is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc