Govt. Industrial Training Institute Bahadurgarh

get iti website @ 1800/-

 

 

Govt. Industrial Training Institute Bahadurgarh is situated in Jhajjar Haryana. Govt. Industrial Training Institute Bahadurgarh is Industrial Training Institute under NCVT Govt. Industrial Training Institute Bahadurgarh.

Institute Type: 

Government ITI

Government ITI is leading educational organisatin in india. Teching facualty of Government ITI is suprimo. ITI is  providing latest Job oriened cource for student. This Government ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme .

Estd: 
01-Jan-1964
ITI code: 
GU06000021
Contact No: 
01276-242304
Address: 
Bahadurgarh
Haryana District: 
Pin Code: 
124507
State: 
Haryana
State: 

Haryana

The Department of Skill Development and Industrial Training, Haryana is imparting skill based training to the unemployed youth of state through the network of 172 Govt. Industrial Training Institutes (139 (Co-Ed.) GITIs and 33 GITIs for Women) and 246 Private ITIs under Craftsman Training Scheme. Engineering & Non- Engineering trade courses of one and two years duration are being run in these institutes. During the current academic year 2019-20, 57328 sanctioned seats in 2610 trade units have been released for admission in GITIs and 34388 sanctioned seats in 1593 trade units have been released for admission in private ITIs.  65627 (47386 in GITI's and 18241 in PITI's) Trainees admitted to Govt. & Pvt. ITI's during session 2019-20.

In the year 1966, when Haryana came into being, there was 48 Govt. Industrial Training Institutes with the seating capacity of 7156. Now, there are total 418 Govt. & Pvt. Industrial Training Institutes with 91716 sanctioned seats offering courses in 80 different trades. Quality of training in ITIs is being upgraded regularly by improvement in curriculum, training methodology and training of trainers through industry sector council at Govt. of India. New trades are also being introduced as per market demand.

Reff: http://itiharyana.gov.in/

Trade: 

Carpenter

ITI trade Carpenter
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Carpenter is powered by NCVT.  ITI trade Carpenter  is a job oriented trade ITI trade Carpenter is suitable for government job and private job. This ITI trade Carpenter is very powerful for self-empowerment. This ITI trade Carpenter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Carpenter has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Carpenter
  • Carpenter Construction

Computer Operator and Programming Assistant (COPA)

Computer Operator and Programming Assistant
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Computer Operator and Programming Assistant (COPA) is powered by NCVT.  ITI trade Computer Operator and Programming Assistant (COPA)  is a job oriented trade ITI trade Computer Operator and Programming Assistant (COPA) is suitable for government job and private job. This ITI trade Computer Operator and Programming Assistant (COPA) is very powerful for self-empowerment. This ITI trade Computer Operator and Programming Assistant (COPA) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The individual can work as both Computer Operator/ Programming Assistant; operates computer and peripheral equipment to process business, scientific, engineering, or other data, according to operating instructions. As programming assistant installs, maintains and updates computer programs by making minor changes and adjustments to them under the guidance of computing professionals. Maintains and updates documents of computer programs and installations with assistance under supervision of supervisor 

On successful completion of this course the candidates shall be gainfully employed as:

  • Computer Operator 
  • Programming Assistant
     

 

Draughtsman (Civil)

ITI trade Draughtsman (Civil)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Draughtsman (Civil) is powered by NCVT.  ITI trade Draughtsman (Civil)  is a job oriented trade ITI trade Draughtsman (Civil) is suitable for government job and private job. This ITI trade Draughtsman (Civil) is very powerful for self-empowerment. This ITI trade Draughtsman (Civil) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

This course is meant for the candidates who aspire to become Civil Draughtsmen whose job roles include planning and drawing sketches of residential buildings from given data, preparing working drawings of all types of buildings from line sketches in CAD, Planning, drawing, estimating, and costing of civil work, drawing plans by using CAD, and making of 3D models of civil work. Giving setting out of site, supervision of civil work etc.

International Comparability

  • Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education.
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering after which they will be employed in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed preferably in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the trade for becoming instructor in ITIs.

Electrician

ITI trade Electrician
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Electrician is powered by NCVT.  ITI trade Electrician  is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

  • Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. 
  •  After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board. 
  • They can set up their own Rewinding and servicing of Domestic Equipment shop.  
  • Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various  Industries etc
  • They can also go for further higher studies after successful completion of course.
  • Students who have completed this course have found employment in the following areas:
  • Service/Maintenance Technician for domestic appliances in Reputed Companies
  • Winder of Electrical Motors in winding shop
  • Contractor for domestic wiring and industrial wiring
  • Armature winder of Electrical fans and motors
  • Electrical appliance repair in electrical shops
  • Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
  • Local Electricity Board
  • Assembler of Electrical control Gears
  • Telephone Department
  • Installation and Testing division of Auditorium and Cinema Hall
  • Factories
  • As Instructor in Govt./Private ITI/ITC
  • Merchant Navy
  • Indian Air Force
  • Self-Employment in Service Centre

Electronics Mechanic

ITI trade Electronics Mechanic
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Electronics Mechanic is powered by NCVT.  ITI trade Electronics Mechanic  is a job oriented trade ITI trade Electronics Mechanic is suitable for government job and private job. This ITI trade Electronics Mechanic is very powerful for self-empowerment. This ITI trade Electronics Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Brief description of job roles:

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis  or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics  Mechanic;  Electronic  Equipment  Mechanic  repairs  electronic  equipment,  such  as computers, industrial controls, transmitters, and telemetering control systems following blueprints and   manufacturer's   specifications   and   using   hand   tools   and   test   instruments.   Tests  faulty equipment  and  applies  knowledge  of  functional  operation  of  electronic  units  and  systems  to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Radio Technician (Radio Manufacturing) tests assembled radio sets with testing equipment to ensure that assembly soldering, frequency, performance, etc. are in accordance with prescribed standards. Places assembled radio set in position and visually examines it to ensure that position of components,  connections, soldering,  wiring,  etc.  are in order.  Switches  on and operates different knobs  to  check  calibration,  audibility  and  general  performance  of  set  by  varying  its  tone  and listening to various stations and frequencies. Tightens loose nuts and screws,  locates  faults,  replaces defective components and conducts necessary changes.  Approves  correctly  assembled sets for further processing and rejects defective ones for rectification. May tests sets at different stages of assembly. May service, repair and overhaul radio sets.

Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work  checks  the  installation  site,  understands  the  layout  requirement  as  per  design,  assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.

Optical  fibre  technician  is  responsible for  maintaining uptime and quality of the network segment (both   optical   media   and   equipment)   assigned   to   him   by   undertaking   periodic   preventive maintenance activities  and  ensuring  effective fault management in  case  of  fault occurrence.  He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF)  as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS repair Technician’, this is an  after  sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual  also  and  interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.

Television Installation Man installs and adjusts television receivers and antennas, using hand tools. Selects antenna according to type of set and location of transmitting station. Bolts cross arms and dipole elements in position to assemble antenna. Secures antenna in place with bracket and guy wires, observing insurance codes and local ordinances to protect installation  from  lighting  and other hazards. Drills and waterproofs holes in building to make passage for transmission line. Connects line between receiver and antenna and fastens it in place. Tunes receiver on all channels and adjusts  screws to obtain desired density, linearity, focus and size of picture. Orients antenna  and installs reflector to obtain strongest possible reception.

Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole,    using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools,  test equipment.

Television Service and Repairman repairs and adjusts radios and television receivers, using hand tools and electronic testing instruments. Tunes receiver on all channels and observes audio and video characteristics to locate source of trouble. Adjusts controls to obtain desired  density,  linearity, focus and size of picture. Examines chassis for defects. Tests voltages and resistance of circuits to isolate defect following schematic diagram and using voltmeter, oscilloscope, signal generator and other electronic testing instruments. Tests and changes tubes, solders loose connections and repairs or replaces defective parts, using hand tools and soldering iron. Repair radios and other audio equipment.

Television  Repair  Technician job role is applicable to both Television manufacturing facilities as  well as electronics service centres. This role pertains to rectify faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Fitter

ITI trade Fitter
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Fitter is powered by NCVT.  ITI trade Fitter  is a job oriented trade ITI trade Fitter is suitable for government job and private job. This ITI trade Fitter is very powerful for self-empowerment. This ITI trade Fitter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Fitters have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the following industries:

  • Production & Manufacturing industries.
  • Structural Fabrication like bridges, Roof structures, Building & construction.
  • Automobile and allied industries
  • Service industries like road transportation and Railways.
  • Ship building and repair
  • Infrastructure and defence organizations
  • In public sector industries like BHEL, BEML, NTPC, etc and private industries in India & abroad.
  • Self employment

International Comparability

  • Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.
     

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Machinist

ITI trade Machinist
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Machinist is powered by NCVT.  ITI trade Machinist  is a job oriented trade ITI trade Machinist is suitable for government job and private job. This ITI trade Machinist is very powerful for self-empowerment. This ITI trade Machinist is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:
• Machinist, Grinder, Operator of various types of power driven metal cutting or grinding machines in Production & Manufacturing industries,Infrastructure and defence organizations.
• Machinists have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.

International Comparability

  • 1. Comparison Made with German Syllabus and the proposed syllabus is in line with the existing German Syllabus (Around 95% contents are matching).
  • 2. However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can become supervisor after doing part-time diploma in relevant branch of Engineering.
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Mechanic (Motor Vehicle)

ITI trade Mechanic (Motor Vehicle)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Motor Vehicle) is powered by NCVT.  ITI trade Mechanic (Motor Vehicle)  is a job oriented trade ITI trade Mechanic (Motor Vehicle) is suitable for government job and private job. This ITI trade Mechanic (Motor Vehicle) is very powerful for self-empowerment. This ITI trade Mechanic (Motor Vehicle) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Installs, tests, maintains, repairs and replaces electrical Power distribution/power line equipments and fittings in factories, workshops, power house, business and residential premises etc. Manipulates controls to adjust and activate those equipments. Monitors and records control board/room readings, examines faults in control room and repairs substation equipments and panels to ensure proper operational efficiency.   
Mechanic Motor Vehicle (MMV) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Motor Vehicle Mechanics, Other 
  • Mechanic, Automobile 
  • Maintenance Technician – Service 
  • Workshop 
  • Auto Service Technician – Mechanic 
  • Fitter Automobile
     

Mechanic (Refrigeration and Air-Conditioning)

Mechanic (Refrigeration and Air-Conditioning)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Refrigeration and Air-Conditioning) is powered by NCVT.  ITI trade Mechanic (Refrigeration and Air-Conditioning)  is a job oriented trade ITI trade Mechanic (Refrigeration and Air-Conditioning) is suitable for government job and private job. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is very powerful for self-empowerment. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic Consumer Electronics Appliances

Mechanic Consumer Electronics Appliances
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Mechanic Consumer Electronics Appliances is powered by NCVT.  ITI trade Mechanic Consumer Electronics Appliances  is a job oriented trade ITI trade Mechanic Consumer Electronics Appliances is suitable for government job and private job. This ITI trade Mechanic Consumer Electronics Appliances is very powerful for self-empowerment. This ITI trade Mechanic Consumer Electronics Appliances is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The Mechanic Consumer Electronic Appliances trade under CTS is one of the popular newly designed courses. The earlier course was Mechanic Consumer Electronics. The course is of two years (04 semester) duration. It mainly consists of trade (skills and knowledge) and Core area (Workshop Calculation & Science, Engineering Drawing and Employability Skills). After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Brief description of job roles:

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics Mechanic; Electronic Equipment Mechanic repairs electronic equipment, such as computers, industrial controls, transmitters, and telemetering control systems following blueprints and manufacturer's specifications and using hand tools and test instruments. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work checks the installation site, understands the layout requirement as per design, assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.

Optical Fibre Technician is responsible for maintaining uptime and quality of the network segment (both optical media and equipment) assigned to him by undertaking periodic preventive maintenance activities and ensuring effective fault management in case of fault occurrence. He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF) as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS Repair Technician’, this is an after sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual also and interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.

Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole, using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools, test equipment.

Television Repair Technician job role is applicable to both Television manufacturing facilities as well as electronics service centres. This role pertains to rectifying faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.

DTH Set-Top Box Installer and Service Technician installs set-top boxes and provides after sales service for Direct to Home (DTH) system. The individual at work installs the set-top box at customers’ premises; addresses the field serviceable complaints and co-ordinates with the technical team for activation of new connections

Field Technician, Washing Machine is also, called ‘Washing Machine Repair Technician’. This job is about providing after sales service to customers. The individual at work installs the washing machine, interacts with customers to diagnose the problem and assesses possible causes of fault reported. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.

Field Technician, Other Home Appliances is also called, ‘Home Appliance Repair Technician’, this is an after sales service job for installing and providing support to the water purifier, mixer/grinder buyers. The individual at work installs the appliance and interacts with customers to diagnose the problem and possible causes. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.

Access Controls Installation Technician: Also called ‘Access Control Device Installer’, the Access Control Installation Technician provides after sale support services for access control devices and systems such as point of sale scanners, finger print or iris scan. The individual at work is responsible for installing the access control system at the customer’s premises. The individual undertakes site assessment, installs the hardware and integrates the system to meet customer’s requirement.

Field Engineer TV is also called, ‘Service Engineer – TV’, the TV Field Engineer provides installation and after sales service to buyers of TV and other consumer electronic products such as home theatre system, DVD and Blu-ray players, audio systems, headphones etc. The individual at work interacts with customers to install the entertainment system and diagnose any problems to assess possible causes of malfunction. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Mechanic Diesel

ITI trade Mechanic Diesel
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic Diesel is powered by NCVT.  ITI trade Mechanic Diesel  is a job oriented trade ITI trade Mechanic Diesel is suitable for government job and private job. This ITI trade Mechanic Diesel is very powerful for self-empowerment. This ITI trade Mechanic Diesel is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Repairs, services and overhauls diesel or oil engines for efficient performance as prime mover to drive different machineries and equipments. Examines engine by dismantling it for locating defects and for necessary repair/replacement and then reassemble it ensuring accuracy of fittings and performance as per specified standards. Checks, adjusts and lubricates engine periodically and performs such other functions to keep engine in good working order. 

On successful completion of this course the candidates shall be gainfully employed as:

  • 1. Mechanic of Diesel Engine, Oil Engine in Automobile Industries
  • 2. Fitter of diesel or oil engines
  • 3. Self-Employment
  • 4. Instructor of Diesel Mechanic after doing CITS course under NCVT

Mechanic Diesel has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Mechanic
  • Diesel Engine.

Painter (General)

Painter (General)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Painter (General) is powered by NCVT.  ITI trade Painter (General)  is a job oriented trade ITI trade Painter (General) is suitable for government job and private job. This ITI trade Painter (General) is very powerful for self-empowerment. This ITI trade Painter (General) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The ‘Painter (General)’ trade under CTS is one of the popular newly designed courses. The course is of two years (04 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while Core area (Workshop Calculation & science, Engineering Drawing and Employability Skills) impart requisite core skill, knowledge and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Applies decorative or protective coats of paint, varnish, shellac, enamel, lacquer or other materials on exterior or interior surfaces, trimming and fixtures of glass, metal, wood, plaster concrete brick, building boards or other objects using suitable tools as per work requirement 
Painter (General) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.
On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Painter,
  • General

job roles

Painter, General applies decorative or protective coats of paint, varnish, shellac, enamel, lacquer or other materials on exterior or interior surfaces, trimming and fixtures of glass, metal, wood, plaster concrete brick, building boards or other objects using brush, spray gun, roller, stencils etc. Receives work order and selects correct type of paint materials with the consideration to suitability, durability, ease of application and estimated cost. Mixes pigments, oils and other ingredients to material where required by manual or mechanical mixing device using paddle or electric mixer to obtain desired colour, shade and consistency. Removes dirt, grease or rough spots and irregularities by scrapers, chemicals and abrasives and patches cracks and holes with putty or other filler. Covers surface with appropriate prime coat or sealer to have suitable surface or base for paint. Brushes, sprays or stencils one or more coats of material on surfaces. May finish or decorate surfaces by gilding, silvering or painting over stencils. May be designated according to object coated or material used. May mix paint with linseed oil, colouring matter of materials, labour, etc. May erect scaffolds to facilitate work.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Plumber

ITI trade Plumber
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Plumber is powered by NCVT.  ITI trade Plumber  is a job oriented trade ITI trade Plumber is suitable for government job and private job. This ITI trade Plumber is very powerful for self-empowerment. This ITI trade Plumber is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Plumber trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional - skills and knowledge, while Core area (Workshop Calculation science, Engineering Drawing and Employability Skills) imparts requisite core skills, knowledge and life skills. After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Plumber assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Responsible for installation, operation and repair of plumbing system used in housing, commercial and institutional setups, drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc., maintenance and servicing of pipes and sanitary fixtures. 

Plumber has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Plumber, General
  • Plumber, Operations
  • Plumber, General-Installation and Repair
  • Plumber, General Helper
  • Plumber, General Assistant
  • Plumber, Maintenance and Servicing Assistant
  • Plumber, Maintenance and Servicing
  • Pipe Layer/Plumber Pipeline
  • Pipe Fitter
  • Plumbers and Pipe Fitters, Other
  • Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant
  • Plumber (Welder) Assistant
  • Plumber (Pumps and E/M Mechanic)

JOB ROLE

Plumber, General; lays out, assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Receives instructions from Sanitary Engineer or Civil Engineer regarding lay out of pipes, gas or water mains, position of fixtures and fittings, etc. Examines drawings or other specifications regarding size and dimensions of area where sanitary fittings or pipe are to be fitted or laid. Marks points at places to indicate position for fixing brackets and laying pipes. Drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc. to keep or hold fittings and fixtures in position, using nuts, bolts, clamps etc. and tightens them with hand tools. Cuts reams, threads and bends pipes as appropriate. Ensures that pipe lines are laid properly by Pipe Fitter. Joins pipes with sockets, Tees, elbow etc. or with molten lead or lead wool. Caulks joints (operation of making joint seam tight to withstand pressure) and tests them for leaks with pneumatic or hydraulic pressure. May repair and maintain sewerage and pipe lines by replacing washers on leaky faucets, mending burst pipes, opening clogged drains, etc. May do lead burning, dressing and bossing of lead pipe and sheet lead, inlaying of wooden tanks, construction of septic tanks etc

Plumber, Operations; is responsible for operation of plumbing system used in housing, commercial and institutional setups.

Plumber, General-Installation and Repair; Plumber (General)-II is responsible for installation and repair plumbing systems including those of advanced sanitary fixtures as per manufacturer͛s specifications in housing, commercial and institutional setups.

Plumber, General Helper; is responsible for helping Plumber (General) by carrying and handling of tools and materials required in installation, minor repair and maintenance of plumbing systems.

Plumber, General Assistant; is responsible for assistance in, preliminary installation and minor repair work of basic plumbing systems in domestic, commercial and institutional setups.

Plumber, Maintenance and Servicing Assistant; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Plumber, Maintenance and Servicing; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Pipe Layer/Plumber Pipeline; Sewer Pipe Layer lays concrete, stone ware or clay pipes to form sanitary drains and sewers. Receives instructions regarding size and type of concrete, stone ware or clay pipe to be laid. Digs or gets earth dug along marked lines using spade, picks etc. to make trenches for laying pipes. Levels and smoothens bottom of trenches to proper gradient by scooping with shovels. Receives pipes of required size lowered into trench manually or by pulley and adjusts their position by hand or crow-bar for correct levelling and vertical and horizontal alignment. Joints pipes together using appropriate couplings, joints, rings etc. and closes joints by caulking with fibre and cement to prevent leakage. Tests joints by hydraulic or pneumatic pressure after sealing. Fills trench with earth to cover laid pipe and rams earth to avoid sinking. Is designated as PIPE LAYER WATERMAINS or WATER MAINS FITTER if engaged in laying cast iron or galvanized iron water pipe mains and in caulking their joints with lead to prevent leakage. May lay pipe lines to provide water connection to houses, sanitary sewers etc. May fix meters to stopcocks, remove defects from pipe lines and replace defective ones.

Pipe Fitter; lays, repairs and maintains, pipes for supply of water, gas, oil or steam in buildings, gardens, workshops, stores, ships etc., according to drawings or instructions. Examines drawings and other specifications or receives relevant instructions. Cuts passage holes for laying pipes in walls and floors. Cuts reams, threads and bends pipes according to specifications. Lays pipes in cut passage and assembles pipe sections with couplings, sockets, Tee's elbows etc. Levels position of pipes using sprit level for gravitational flow. Caulks joints, tests them for leakage with pneumatic or hydraulic pressure and secures pipe line to structure with clamps, brackets, and hangers. Fits water meters, taps etc. to pipe where necessary. Repairs and replaces leaky pipe lines, taps and joints and provides connections to overhead water tanks. Helps Plumber, General in fittings sanitary fittings to buildings. May join pipe sections and fittings.

Plumbers and Pipe Fitters, Other; perform number of routine and low skilled tasks such as assisting in laying pipes, making water tight joints, fitting sockets and reducers, threading pipes with taps and dies, removing leakages, etc., and are designated as Plumber Mate or Pipe Fitter Helper according to type of work done.

Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant; is responsible for welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Welder) Assistant; is responsible for assistance in welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Pumps and E/M Mechanic); is responsible for installation and repair of Pumps and E/M equipment used for different plumbing applications of housing, commercial and institutional Set ups.

Sheet Metal Worker

ITI trade Sheet Metal Worker
Trades Duration: 
One year
Minimum Qualification Eligibility: 
8th Passed
Trade Type: 
Engineering

ITI trade Sheet Metal Worker is powered by NCVT.  ITI trade Sheet Metal Worker  is a job oriented trade ITI trade Sheet Metal Worker is suitable for government job and private job. This ITI trade Sheet Metal Worker is very powerful for self-empowerment. This ITI trade Sheet Metal Worker is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

SHEET METAL WORKER has a wide scope of Employability ranging from selfemployment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

 Sheet Metal Worker, General/Sheet Metal Worker – Hand Tools and Manually Operated Machines
 

Stenographer & Secretarial Assistant (English)

Stenographer & Secretarial Assistant
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed
Trade Type: 
Non Engineering

ITI trade Stenographer & Secretarial Assistant (English) is powered by NCVT.  ITI trade Stenographer & Secretarial Assistant (English)  is a job oriented trade ITI trade Stenographer & Secretarial Assistant (English) is suitable for government job and private job. This ITI trade Stenographer & Secretarial Assistant (English) is very powerful for self-empowerment. This ITI trade Stenographer & Secretarial Assistant (English) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Stenographer Secretarial Assistant (English) trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while the core area (Employability Skill) imparts requisite core skills, knowledge, and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the senior 
Stenographer Secretarial Assistant (English)
has a wide scope of Employability ranging from self-employment, contractual employment. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Private Secretary
  • Personal Secretary
  • Secretaries, Other

JOB ROLE

Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the boss. Following are the job roles for a Stenographer Secretarial Assistant (English):

  • Correspond through emails, phone and faxes
  • Maintaining and updating filing systems
  • Coordinating with department heads to ensure smooth working of the organization
  • Handling day-to-day administrative duties of the organization
  • Making arrangement for meetings, conference and seminars
  • Handling various activities within and outside the organization
  • Taking dictation in shorthand and operating typewriter for transcribing dictated materials
  • Handled and maintained correspondence files and other official documents
  • Made travel bookings for domestic and international services
  • Drafted business letters in clear and precise manner for easy understanding
  • Coordinated business meetings and wrote minutes of meetings in shorthand
  • Handled confidential information of the organization
  • Prepared reports and documents for inter-department
  • Handled day-to-day activities of the organization
  • Prepared various presentations for the management team 

Stenographer & Secretarial Assistant (Hindi)

Stenographer & Secretarial Assistant (Hindi)
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed
Trade Type: 
Non Engineering

ITI trade Stenographer & Secretarial Assistant (Hindi) is powered by NCVT.  ITI trade Stenographer & Secretarial Assistant (Hindi)  is a job oriented trade ITI trade Stenographer & Secretarial Assistant (Hindi) is suitable for government job and private job. This ITI trade Stenographer & Secretarial Assistant (Hindi) is very powerful for self-empowerment. This ITI trade Stenographer & Secretarial Assistant (Hindi) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

‘Stenographer Secretarial Assistant (Hindi)’ trade under CTS is delivered nationwide through a network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while the Core area (Employability Skill) imparts requisite core skills, knowledge, and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Stenographer Secretarial Assistant (Hindi) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. He/she drafts business letters in clear and precise manner for easy understanding; prepares reports and documents for inter-department. 
Stenographer Secretarial Assistant (Hindi) has a wide scope of Employability ranging from self-employment, contractual employment. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Secretary/Back Office Support 
  • Private Secretary 
  • Personal Secretary 
  • Secretaries, Other

JOB ROLE

Stenographer Secretarial Assistant (Hindi); takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the boss.

Private Secretary-cum-Stenographer; Personal Assistant takes dictation in shorthand and reproduces it on paper using typewriter and performs various other clerical duties to assist superiors. Takes dictations in shorthand and transcribes them using typewriter. Receives and opens mail and submits it to superiors for information and further action. Maintains diary to note time, date and place of meetings and other engagements for employer or superior. Reminds employer or superior of engagements and accompanies him if required. Attends to routine enquiries in person, writing or over phone. Receives visitors and arranges their interviews with superior. Keeps important and confidential records. May attend to routine correspondence on behalf of employer.

Personal Secretary; performs routine clerical and administrative functions such as drafting correspondence, scheduling appointments, organizing and maintaining paper and electronic files, or providing information to callers. Operates office equipment such as fax machines, copiers, and phone systems, and use computers for spreadsheet, word processing, database management, and other applications. Answers telephones and give information to callers, take messages, or transfer calls to appropriate individuals. Greets visitors and callers, handle their inquiries, and direct them to the appropriate persons according to their needs. Sets up and maintains paper and electronic filing systems for records, correspondence, and other material. Locates and attaches appropriate files to incoming correspondence requiring replies. Opens, reads, routes, and distributes incoming mail and other material, and prepares answers to routine letters. Completes forms in accordance with company procedures

Secretaries, Other; include secretaries who use typewriters or word-processing equipment to check and transcribe correspondence and other documents, deal with incoming and outgoing mail, and deal with routine correspondence on their own initiative not elsewhere classified.

Secretary/Back Office Support; Stenographers; Steno-typist records dictations in shorthand and transcribe them in typewritten form. Takes dictation in shorthand. Transcribe dictated material from note book, using typewriter. Compares typed matter and submits them to superiors. May cut stencil on typewriter for use on duplicating machine.

Turner

ITI trade Turner
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Turner is powered by NCVT.  ITI trade Turner  is a job oriented trade ITI trade Turner is suitable for government job and private job. This ITI trade Turner is very powerful for self-empowerment. This ITI trade Turner is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion the passed out trainee

  • 1.  Can work in the industry as skilled turner.
  • 2. Can work in the field of basic fitting, lathe, drilling, Inspection & measurement observing safety precautions.
  • 3.  Can perform all the turning operations on lathe & perform simple programming & operations on a CNC lathe.
  • 4. Can handle different type of Fire extinguishers & personal protective equipment.

Welder

ITI trade Welder
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Welder is powered by NCVT.  ITI trade Welder  is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc

Map: 

ITI Student Resume Portal

रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं

ITI Student Resume

ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं

 

Search engine adsence