Mechanic Auto Electrical and Electronics

Syllabus:

Syllabus for ITI Trade Mechanic Auto Electrical and Electronics

Trade Type:

Engineering

Trades Duration:

One year

Trade Sector:

Automotive

ITI trade Mechanic Auto Electrical and Electronics is powered by NCVT. ITI trade Mechanic Auto Electrical and Electronics is a job oriented trade ITI trade Mechanic Auto Electrical and Electronics is suitable for government job and private job. This ITI trade Mechanic Auto Electrical and Electronics is very powerful for self-empowerment. This ITI trade Mechanic Auto Electrical and Electronics is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion of the above course, the trainee shall be able to perform the following skills with proper sequence.

Installs, repairs replaces and overhauls wiring, starters, generators, distributors and other electrical equipment of motor vehicles.

Examines vehicle battery, checks voltage and specific gravity using special equipment such as voltmeter hydrometer, heavy discharge tester, etc. and ensures that battery is in good condition.
Checks vehicle wiring, locates faults and rectifies defects by replacing damaged wire or connecting ends with insulation tape.
Starts engine to check whether alternator is charging correctly, and if distributor, condenser coil and cut out are functioning properly.
Estimates nature of defects and reports components to be replaced or repaired.
Dismantles and repairs electrical units and components such s generator, distributor etc. where required.
Replaces repaired kit or unit in vehicle and connects it with battery.
Conducts thorough examination of various electrical fittings such as lights, panel indicators, fuel pumps, etc and rectifies defects.
Checks condition and makes necessary adjustments. May do armature winding. May drive vehicles on road. May charge batteries.
Fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use.
Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; Installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment;
Dismantles equipment if required and replaces faulty parts or wiring

A. GENERIC OUTCOMES

1. Recognize & comply safe working practices, environment regulation and housekeeping.
2. Work in a team, understand and practice soft skills, technical English to communicate with required clarity.
3. Demonstrate knowledge of concept and principles of basic arithmetic & algebraic and apply knowledge of specific area to perform practical operations.
4. Understand basic science in the field of study.
5. Read and understand engineering drawing for different application in the field of work.
6. Understand the concept in productivity, quality tools, and labour welfare legislation.
7. Explain energy conservation, global warming and pollution.
8. Explain time management, entrepreneurship and manage/organize related task in day to day work for personal & societal growth.
9. Understand and apply basic computer working, basic operating system and uses internet services to get accustomed & take benefit of IT developments in the industry.

SEMESTER – I

1. Apply safe working practices in an automotive work shop.
2. Comply environment regulations and housekeeping in the work shop.
3. Perform precision measurements on the components and compare parameters with specifications used in automotive work shop practices.
4. Make choices to carry out marking out the components for basic fitting operations in the work shop.
5. Use different types of tools and work shop equipment in the Auto work shop.
6. Use of different type of fastening and locking devices in a vehicle.
7. Perform basic fitting operations used in the work shop practices and inspection of dimensions.
8. Grinding of cutting tools in the work shop.
9. Perform surface finishing operations in the given job.
10.Produce sheet metal components using various sheet metal operations.
11.Produce components using bending process in the given work piece.
12.Inspect the auto component using Nondestructive testing methods
13.Manufacture components with different types of welding processes in the given job.
14.Identify the hydraulic and pneumatic components in a vehicle.
15.Construct electrical circuits and test its parameters by using electrical measuring instruments.
16.Perform basic electrical testing in a vehicle.
17.Perform battery testing and charging operations.
18.Construct basic electronic circuits and testing

SEMESTER - II

1. Apply safe working practices and environment regulation in an automotive work shop.
2. Use different types of conventional and special tools, hardware, fasteners and work shop equipment in the work shop.
3. Ascertain and select measuring instrument and measure dimension of components and evaluate for accuracy.
4. Identify the major components of LMV/HMV and dashboard gauges.
5. Perform the wiring circuits and the electrical components in the vehicle.
6. Trace /troubleshoot different wiring circuits in vehicle and prepare different electrical joints.
7. Check and overhaul the ignition system.
8. Service and test battery for proper functioning.
9. Demonstrate practical skill involved in diagnosis the trouble and rectify the problem in the dashboard gauges.
10.Plan and organize the work in familiar predictable / routine environment for different maintenance of vehicle parts and accessories.
11.Inspect power steering control module and troubleshoot in power steering.
12.Identify and check ABS components.
13.Trouble shoots in all electrical circuits.
14.Diagnosis for all comfort system.
15.Understand the constructional features and working principles of MPFI system.
16.Identify the components of MPFI system and different types of sensors in an engine.
17.Apply appropriate rule and tools for starting and charging system and diagnose & rectify faults
18.Identify EDC components, sensors and actuators.
19.State the constructional features and working principles of vehicle comfort & safety systems and diagnose and related Faults.
20.Identify the major components of car AC and carry out repair, maintenance of AC system.
21.Demonstrate the skill of automotive lighting system and their troubleshooting.
22.State the working principle of car network system, Sensors & actuators, their diagnosis with proper tools and scanners and recognize scan tool data using manuals

Minimum Qualification Eligibility:

10th Passed under 10+2 System

Angel Private Industrail Training Institute, Patehar

Submitted by iti on 7 August 2020 - 5:16pm

Angel Private Industrail Training Institute, Patehar is situated in Una Himachal Pradesh. Angel Private Industrail Training Institute, Patehar is Industrial Training Institute under NCVT Angel Private Industrail Training Institute, Patehar. Location of Angel Private Industrail Training Institute, Patehar is Patehar P.O Nehrian Tehsil Amb Una Himachal Pradesh.

Institute Type:

Private ITI

Address:

Patehar P.O Nehrian Tehsil Amb

Himachal Pradesh District:

Una

State:

Himachal Pradesh

State:

Himachal Pradesh

Trade:

Electrician

Mechanic (Motor Vehicle)

Mechanic Auto Electrical and Electronics

Govt ITI, Baroh

Submitted by iti on 2 August 2020 - 8:53am

Govt ITI, Baroh is situated in Kangra Himachal Pradesh. Govt ITI, Baroh is Industrial Training Institute under NCVT Govt ITI, Baroh. Location of Govt ITI, Baroh is V.P.O Sarotri Tehsil Baroh Distt. Kangra (H.P) Kangra Himachal Pradesh.

Institute Type:

Government ITI

Address:

V.P.O Sarotri Tehsil Baroh Distt. Kangra (H.P)

Himachal Pradesh District:

Kangra

State:

Himachal Pradesh

State:

Himachal Pradesh

Trade:

Electrician

Fitter

Mechanic (Motor Vehicle)

Mechanic Auto Electrical and Electronics

Plumber

Sewing Technology

ITI Employability Skills Books I Year

Submitted by Anand on 23 July 2020 - 12:27am

ITI Book ITI Employability Skills Books I Year is by Manish Sharma. ITI Employability Skills Books I Year is according to Latest NSQF Level. ITI Employability Skills Books I Year is according to latest syllabus of DGT(NCVT). ITI Employability Skills Books I Year is for I Year.

Computer Networking and Internet

Entrepreneurship Skills