Mata Bhagwanti Devi Iti

get iti website @ 1800/-

 

 

Mata Bhagwanti Devi Iti is situated in Bathinda Punjab. Mata Bhagwanti Devi Iti is Industrial Training Institute under NCVT Mata Bhagwanti Devi Iti. Location of Mata Bhagwanti Devi Iti is MATA BHAGWANTI DEVI ITI, NEAR DERA SHRI RAM TILLA, MALUKA. Bathinda Punjab.

Institute Type: 

Private ITI

Private ITI is leading educational organisatin in india. Teching facualty of Private ITI is suprimo. ITI is  providing latest Job oriened cource for student. This Private ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme . ITI is registered by government under NCVT .

Estd: 
28-Jan-2015
ITI code: 
PR03000354
Contact No: 
256888
Address: 
MATA BHAGWANTI DEVI ITI, NEAR DERA SHRI RAM TILLA, MALUKA.
Punjab District: 
Pin Code: 
151206
State: 
Punjab
State: 

Punjab

The Department of Technical Education & Industrial Training was created on 10.06.1977 in its present form after detaching the Technical Education Wing from the Department of Punjab, P.W.D. (B&R) and detaching the Industrial Training Wing from the Department of industries thereby bringing both the wings under one umbrella though each of these two wings are more than 50 years old.

The Industrial Training Wing of Department of Technical Education and Industrial Training has been entrusted with the responsibility of imparting vocational training in Engineering and non-engineering trades under craftsman training scheme & Applied training scheme to cater the need of the industry in respect of skilled workers. All the Industrial Training Institutes centre work under Craftsman Training Scheme of Government of India, Director - General Employment & Training under the directions of National Council of Vocational Training which is the apex body at Government of India level for coordinating development of Vocational Training in the country. Similar to the National Council for Vocational Training at Central level, State Council for Vocational Training the State level is responsible for coordinating an integrated development of Vocational Training

Reff: https://itipunjab.nic.in/genregsys/Candidate/Default.aspx

Trade: 

Dress Making

ITI trade Dressmaking
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Dress Making is powered by NCVT.  ITI trade Dress Making  is a job oriented trade ITI trade Dress Making is suitable for government job and private job. This ITI trade Dress Making is very powerful for self-empowerment. This ITI trade Dress Making is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Dress Making’ constructs dresses for children (Yoke Frock), dresses for teenagers, ladies dress, ladies suit, ladies night wear, ladies blouse, gents shirt, and gents trouser, according the sketched designs and blocks using adaptation/draping and manipulation techniques. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, and Assistant Production Merchandiser 

The qualification gives access to jobs such as Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, Assistant Production Merchandiser.

This qualification will enable the trainee to find employment as a skilled worker to perform jobs in the Dress Making field

Dressmaking

ITI trade Dressmaking
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Non Engineering

ITI trade Dressmaking is powered by NCVT.  ITI trade Dressmaking  is a job oriented trade ITI trade Dressmaking is suitable for government job and private job. This ITI trade Dressmaking is very powerful for self-empowerment. This ITI trade Dressmaking is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Dress Making’ constructs dresses for children (Yoke Frock), dresses for teenagers, ladies dress, ladies suit, ladies night wear, ladies blouse, gents shirt, and gents trouser, according the sketched designs and blocks using adaptation/draping and manipulation techniques. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, and Assistant Production Merchandiser 

The qualification gives access to jobs such as Sewing Machine operator, Designer to a Boutique, Stylist in Boutique, Consultant to a Boutique, Be-spoke designer, Design Assistant in Export units, Design service in e-tailing, Assistant Production Merchandiser.

This qualification will enable the trainee to find employment as a skilled worker to perform jobs in the Dress Making field

Plumber

ITI trade Plumber
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Plumber is powered by NCVT.  ITI trade Plumber  is a job oriented trade ITI trade Plumber is suitable for government job and private job. This ITI trade Plumber is very powerful for self-empowerment. This ITI trade Plumber is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Plumber trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional - skills and knowledge, while Core area (Workshop Calculation science, Engineering Drawing and Employability Skills) imparts requisite core skills, knowledge and life skills. After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Plumber assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Responsible for installation, operation and repair of plumbing system used in housing, commercial and institutional setups, drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc., maintenance and servicing of pipes and sanitary fixtures. 

Plumber has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Plumber, General
  • Plumber, Operations
  • Plumber, General-Installation and Repair
  • Plumber, General Helper
  • Plumber, General Assistant
  • Plumber, Maintenance and Servicing Assistant
  • Plumber, Maintenance and Servicing
  • Pipe Layer/Plumber Pipeline
  • Pipe Fitter
  • Plumbers and Pipe Fitters, Other
  • Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant
  • Plumber (Welder) Assistant
  • Plumber (Pumps and E/M Mechanic)

JOB ROLE

Plumber, General; lays out, assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Receives instructions from Sanitary Engineer or Civil Engineer regarding lay out of pipes, gas or water mains, position of fixtures and fittings, etc. Examines drawings or other specifications regarding size and dimensions of area where sanitary fittings or pipe are to be fitted or laid. Marks points at places to indicate position for fixing brackets and laying pipes. Drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc. to keep or hold fittings and fixtures in position, using nuts, bolts, clamps etc. and tightens them with hand tools. Cuts reams, threads and bends pipes as appropriate. Ensures that pipe lines are laid properly by Pipe Fitter. Joins pipes with sockets, Tees, elbow etc. or with molten lead or lead wool. Caulks joints (operation of making joint seam tight to withstand pressure) and tests them for leaks with pneumatic or hydraulic pressure. May repair and maintain sewerage and pipe lines by replacing washers on leaky faucets, mending burst pipes, opening clogged drains, etc. May do lead burning, dressing and bossing of lead pipe and sheet lead, inlaying of wooden tanks, construction of septic tanks etc

Plumber, Operations; is responsible for operation of plumbing system used in housing, commercial and institutional setups.

Plumber, General-Installation and Repair; Plumber (General)-II is responsible for installation and repair plumbing systems including those of advanced sanitary fixtures as per manufacturer͛s specifications in housing, commercial and institutional setups.

Plumber, General Helper; is responsible for helping Plumber (General) by carrying and handling of tools and materials required in installation, minor repair and maintenance of plumbing systems.

Plumber, General Assistant; is responsible for assistance in, preliminary installation and minor repair work of basic plumbing systems in domestic, commercial and institutional setups.

Plumber, Maintenance and Servicing Assistant; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Plumber, Maintenance and Servicing; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Pipe Layer/Plumber Pipeline; Sewer Pipe Layer lays concrete, stone ware or clay pipes to form sanitary drains and sewers. Receives instructions regarding size and type of concrete, stone ware or clay pipe to be laid. Digs or gets earth dug along marked lines using spade, picks etc. to make trenches for laying pipes. Levels and smoothens bottom of trenches to proper gradient by scooping with shovels. Receives pipes of required size lowered into trench manually or by pulley and adjusts their position by hand or crow-bar for correct levelling and vertical and horizontal alignment. Joints pipes together using appropriate couplings, joints, rings etc. and closes joints by caulking with fibre and cement to prevent leakage. Tests joints by hydraulic or pneumatic pressure after sealing. Fills trench with earth to cover laid pipe and rams earth to avoid sinking. Is designated as PIPE LAYER WATERMAINS or WATER MAINS FITTER if engaged in laying cast iron or galvanized iron water pipe mains and in caulking their joints with lead to prevent leakage. May lay pipe lines to provide water connection to houses, sanitary sewers etc. May fix meters to stopcocks, remove defects from pipe lines and replace defective ones.

Pipe Fitter; lays, repairs and maintains, pipes for supply of water, gas, oil or steam in buildings, gardens, workshops, stores, ships etc., according to drawings or instructions. Examines drawings and other specifications or receives relevant instructions. Cuts passage holes for laying pipes in walls and floors. Cuts reams, threads and bends pipes according to specifications. Lays pipes in cut passage and assembles pipe sections with couplings, sockets, Tee's elbows etc. Levels position of pipes using sprit level for gravitational flow. Caulks joints, tests them for leakage with pneumatic or hydraulic pressure and secures pipe line to structure with clamps, brackets, and hangers. Fits water meters, taps etc. to pipe where necessary. Repairs and replaces leaky pipe lines, taps and joints and provides connections to overhead water tanks. Helps Plumber, General in fittings sanitary fittings to buildings. May join pipe sections and fittings.

Plumbers and Pipe Fitters, Other; perform number of routine and low skilled tasks such as assisting in laying pipes, making water tight joints, fitting sockets and reducers, threading pipes with taps and dies, removing leakages, etc., and are designated as Plumber Mate or Pipe Fitter Helper according to type of work done.

Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant; is responsible for welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Welder) Assistant; is responsible for assistance in welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Pumps and E/M Mechanic); is responsible for installation and repair of Pumps and E/M equipment used for different plumbing applications of housing, commercial and institutional Set ups.

Surface Ornamentation Techniques (Embroidery)

Surface Ornamentation Techniques (Embroidery)
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed
Trade Type: 
Non Engineering

ITI trade Surface Ornamentation Techniques (Embroidery) is powered by NCVT.  ITI trade Surface Ornamentation Techniques (Embroidery)  is a job oriented trade ITI trade Surface Ornamentation Techniques (Embroidery) is suitable for government job and private job. This ITI trade Surface Ornamentation Techniques (Embroidery) is very powerful for self-empowerment. This ITI trade Surface Ornamentation Techniques (Embroidery) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Surface Ornamentation Techniques (Embroidary)’ carries out typical embroidery works such as Drawn and Pulled Thread, Assisi, Cut, Swiss, and Shadow, and traditional embroidery works such as Phulkari, Kantha, Kasuti, Chikankari, Kashida, Chamba, and Kutch. The trainee also prepares fancy nets such as Cane weaving, Fancy net with Lazy Daisy, Fancy net with Cross Stitch, Fancy net with Circles, and Button hole net and carries out Appliqué work such as Simple Appliqué, Cut Appliqué, and Felt Appliqué. The course is meant for the candidates who aspire to become Tracing experts, Hand Embroider, Zig-Zag Machine Operator, Aari Embroider, Motif Maker, Entrepreneur & Design Coordinate to Fashion Designer 

The qualification gives access to jobs such as Tracing experts, Hand Embroider, Zig-Zag Machine Operator, Aari Embroider, Motif Maker, Entrepreneur & Design Coordinate to Fashion Designer

JOB ROLES

This course is meant for the candidates who aspire to become Tracing experts, Hand Embroider, ZigZag Machine Operator, Aari Embroider, Motif Maker, Entrepreneur & Design Coordinate to Fashion Designer.

Welder

ITI trade Welder
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Welder is powered by NCVT.  ITI trade Welder  is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc

Map: 

ITI Student Resume Portal

रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं

ITI Student Resume

ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं

 

Search engine adsence