Brief description of Job roles:

• Carryout Installation, maintenance & repair works of Electrical AC/ DC machinery, lighting circuits and equipments used in industries.
• 5S & Housekeeping awareness and techniques.
• Use, handling and storage of hazardous chemicals.
• Troubleshooting of electrical items used in plating.
• Practice on using fitting, carpentry and sheet metal tools.
• Use of electrical instrument (analog/digital) like voltmeter, Ammeter, Wattmeter, Energy Meter, Wheatstone bridge, oscilloscope, Earth tester, Tong tester, Megger etc to measure to different electrical quantities.
• Carry out Wiring & Earthing System.
• Carry out surface finishing process prior to plating.
• Carry out electroplating process on various metals and metal alloys.
• Carry out electroplating on plastics and other non-metallic surfaces.
• Carry out electroplating on precious metals.
• Carry out electroless nickel and electroless chrome plating.
• Carry out plating according to specific user benefits.
• Carry out Hot dipping process & electroplating (granadising).
• Carry out anaodizing and Galvanizing processes and metal colouring
• Carry out plating on PCB’s; heat treatment, conversion coating, masking and stripping process
• Carry out the work to minimize contamination and effluent treatment and other safety control measures
• Quality test for plated work and correction of faults.

Electroplater; gives coating of gold, silver, nickel, chromium, copper etc. of required thickness to metal parts by electrolytic process. Examines strength of metallic solution and sets anode plates (positive terminal) in solution. Suspends de-greased components well dipped in side plating solution and connects cathode (negative) to it. Regulates current and allows components to remain dipped in solution for specific period depending upon type and thickness of plating required. Removes components and swills them in hot and cold water baths. Dries them in sawdust or centrifugal air dryer. Transfers components to unrigging rack or other specified place for policing. May prepare plating solution under guidance of shop supervisor. Is designated as Gillder if engaged in gold platting and Anodiser if colours aluminium and light alloys article using specific chemical solutions.

Surface Treatment Technician; is responsible for conducting electroplating, powder coating and Anodizing operations as per the product and the customer requirement to ensure that the surface of the metallic body becomes resistant to chemicals, moisture and other wear and tear.

Galvanizer; applies coating of zinc on ferrous articles by dipping them in molten zinc. Checks and controls quantity, quality and temperature of acid (hydrochloric acid), flux (zinc chloride) and zinc baths. Preheat articles if necessary and dips or passes them either manually or mechanically through, acid, water, flux and zinc baths successively at controlled speed. Skims dirt from baths and continues operation with necessary adjustment of solution, temperature etc., ensuring regular and uniform coating. May similarly apply tin coating using palm oil as flux and be designated as Tin Plater or Tinning Machine Operator. May regulate temperature by gauges and by colour of melting metals.

LEARNING OUTCOME

Learning outcomes are a reflection of total competencies of a trainee and assessment will be carried out as per the assessment criteria.

FIRST YEAR:

• 1. Prepare profile with an appropriate accuracy as per drawing following safety precautions.
• 2. Prepare electrical wire joints, carry out soldering and crimping.
• 3. Verify characteristics of electrical and magnetic circuits.
• 4. Carry out Installation, testing and maintenance of batteries with due care and safety.
• 5. Perform wiring, installation of electrical accessories and earthing of electrical equipment.
• 6. Construct small electronic circuits as per drawing using basic electronic components.
• 7. Explain principles and basic process of plating one metal onto another by electrolysis. Use laboratory apparatus and estimate pH, mass, normality, conductivity, specific gravity etc.
• 8. Handle different solutions with due care & safety and undertake metal treatment processes and effluent treatment of hazardous chemicals in electroplating workshop. Prepare chemical solutions and undertake cooling, heating, filtering, agitating and other treatments for solutions. Carry out analysis of chemical baths with Hull cell process.
• 9. Plan and perform all the various aspects of the plating process including surface preparation, mechanical cleaning like polishing, buffing, blasting etc. and chemical cleaning like electro cleaning, ultrasonic cleaning, vapour degreasing, pickling, rinsing, masking etc.
• 10. Plan and perform Copper plating using different methods, examine various defects in Copper plating, causes and their remedies. Remove defective copper deposit by different methods.
• 11. Plan and perform Nickel plating using different methods, examine various defects in Nickel plating, causes and their remedies. Remove defective nickel deposit by different methods.
• 12. Plan and perform Bright and Hard Chromium plating by different methods on ferrous and non-ferrous metals, examine various defects in Chromium plating, causes and their remedies. Remove defective chromium deposit by different methods.

SECOND YEAR:

• 13. Plan and perform Zinc plating by different methods, examine various defects in Zinc plating, causes and their remedies. Remove defective zinc by different methods.
• 14. Plan and perform Cadmium plating by different methods, examine various defects in Cadmium plating, causes and their remedies. Remove defective cadmium deposit by different methods.
• 15. Plan and perform Tin Plating by different methods, examine various defects in Tin plating, causes and their remedies. Remove defective tin deposit by different methods.
• 16. Plan and perform Silver plating by different methods, examine various defects in Silver plating, causes and their remedies. Remove defective silver deposit by different methods.
• 17. Plan and perform Gold plating by different methods, examine various defects in Gold plating, causes and their remedies. Remove defective gold deposit by different methods.
• 18. Plan and perform Brass plating, examine various defects in Brass plating, causes and their remedies. Remove defective brass deposit by different methods.
• 19. Perform Barrel plating method of electroplating for the plating of copper, nickel, tin, zinc and cadmium.
• 20. Plan and perform electroless plating of copper, nickel, tin, silver and gold.
• 21. Plan and perform plating of copper, tin, nickel, zinc, cadmium etc. on aluminium with Zincate dipping process.
• 22. Plan and perform plating of copper, nickel, chromium, silver and gold on non conductive surface like plastic.
• 23. Make Printed circuit board with copper, nickel, tin, silver and gold. Perform chemical etching processes for copper and brass.
• 24. Plan and perform Anodizing to convert metal surface into a decorative, durable and corrosion resistant by different methods. Examine various defects generally encountered in anodising, causes and their remedies. Remove the defective anodised film by various methods.
• 25. Plan and perform various colouring techniques on anodised aluminium by different colouring dyes and other methods like electro colouring.
• 26. Perform various conversions coating process on aluminium, magnesium and its alloys. Perform chemical milling on Aluminium and undertake passivation of stainless steel.
• 27. Plan and perform phosphating, powder coating and metallizing on various metals.
• 28. Perform quality control aspect of the job and ensure electroplated surfaces are free of any flaws or defects. Perform various tests viz., adhesion, porosity, thickness, corrosion resistance, anodic coating on aluminium, chemical analysis of electrolytes and identification of deposits etc.
• 29. Prepare layout of electroplating plant, estimate cost, materials and accessories required for electroplating shop. Carryout preventive and breakdown maintenance of machines in electroplating shop.