ITI Directory Directory of Government ITI and Private ITI under NCVT

Syllabus for ITI Trade Driver Cum Mechanic

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Draughtsman (Civil) is powered by NCVT. ITI trade Draughtsman (Civil) is a job oriented trade ITI trade Draughtsman (Civil) is suitable for government job and private job. This ITI trade Draughtsman (Civil) is very powerful for self-empowerment. This ITI trade Draughtsman (Civil) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

This course is meant for the candidates who aspire to become Civil Draughtsmen whose job roles include planning and drawing sketches of residential buildings from given data, preparing working drawings of all types of buildings from line sketches in CAD, Planning, drawing, estimating, and costing of civil work, drawing plans by using CAD, and making of 3D models of civil work. Giving setting out of site, supervision of civil work etc.

International Comparability

Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education.
Can take admission in diploma course in notified branches of Engineering by lateral entry
Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering after which they will be employed in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed preferably in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
Can join Crafts Instructor Training Scheme (CITS) in the trade for becoming instructor in ITIs.

Driver Cum Mechanic

Syllabus:

Syllabus for ITI Trade Electrician

Trades Duration:

6 Months

Trade Type:

Non Engineering

ITI trade Driver Cum Mechanic is powered by NCVT. ITI trade Driver Cum Mechanic is a job oriented trade ITI trade Driver Cum Mechanic is suitable for government job and private job. This ITI trade Driver Cum Mechanic is very powerful for self-empowerment. This ITI trade Driver Cum Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Driver cum Mechanic,drivesmotor car according to owner's requirement as paid employee. Observes road signals and traffic rules.
Driver cum Mechanic repairs to motor vehicles under guidance of Mechanic Motor vehicle (MMV). Receives instructions from Mechanic, Automobile about tasks to attend. Jacks up vehicle to equired height for repair in convenient position where necessary.
Lubricates joints, tightens loose parts and makes necessary adjustments
Sets wheel alignment, adjust, steering, clutch, hand brakes, brake pedal etc fits new or repaired accessories and body parts, and performs other tasks to effect repairs
Carryout routine Maintenance of Battery and Ignition System
Carryout Tire Maintenance
Identify Computer Parts and operate the computer

A trainee after attending the course on ‘Driver cum Mechanic’ shall be able to drive motor car according to owner's requirement, observe road signals and traffic rules, repair motor vehicles under guidance of a Mechanic (Motor vehicle), jack up vehicle to the required height for repair in convenient position where necessary, lubricate joints, tighten loose parts and make necessary adjustments, set wheel alignment, adjust steering, clutch, hand brakes, brake pedal etc., fit new or repaired accessories and body parts, and carry out routine maintenance of battery and ignition systems, and tire.

Driver cum Mechanic, drives motor car according to owner's requirement as paid employee. Observes road signals and traffic rules.
Driver cum Mechanic repairs to motor vehicles under guidance of Mechanic Motor vehicle (MMV). Receives instructions from Mechanic, Automobile about tasks to attend.

Electrician

Syllabus:

Power

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Electrician is powered by NCVT. ITI trade Electrician is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.
After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board.
They can set up their own Rewinding and servicing of Domestic Equipment shop.
Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various Industries etc
They can also go for further higher studies after successful completion of course.
Students who have completed this course have found employment in the following areas:
Service/Maintenance Technician for domestic appliances in Reputed Companies
Winder of Electrical Motors in winding shop
Contractor for domestic wiring and industrial wiring
Armature winder of Electrical fans and motors
Electrical appliance repair in electrical shops
Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
Local Electricity Board
Assembler of Electrical control Gears
Telephone Department
Installation and Testing division of Auditorium and Cinema Hall
Factories
As Instructor in Govt./Private ITI/ITC
Merchant Navy
Indian Air Force
Self-Employment in Service Centre

Student Help Portal:

https://electrician.iti.directory

Electronics Mechanic

Syllabus:

Syllabus for ITI Trade Electronics Mechanic

Syllabus for ITI Trade Fitter

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Electronics Mechanic is powered by NCVT. ITI trade Electronics Mechanic is a job oriented trade ITI trade Electronics Mechanic is suitable for government job and private job. This ITI trade Electronics Mechanic is very powerful for self-empowerment. This ITI trade Electronics Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Brief description of job roles:

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics Mechanic; Electronic Equipment Mechanic repairs electronic equipment, such as computers, industrial controls, transmitters, and telemetering control systems following blueprints and manufacturer's specifications and using hand tools and test instruments. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Radio Technician (Radio Manufacturing) tests assembled radio sets with testing equipment to ensure that assembly soldering, frequency, performance, etc. are in accordance with prescribed standards. Places assembled radio set in position and visually examines it to ensure that position of components, connections, soldering, wiring, etc. are in order. Switches on and operates different knobs to check calibration, audibility and general performance of set by varying its tone and listening to various stations and frequencies. Tightens loose nuts and screws, locates faults, replaces defective components and conducts necessary changes. Approves correctly assembled sets for further processing and rejects defective ones for rectification. May tests sets at different stages of assembly. May service, repair and overhaul radio sets.

Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work checks the installation site, understands the layout requirement as per design, assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.

Optical fibre technician is responsible for maintaining uptime and quality of the network segment (both optical media and equipment) assigned to him by undertaking periodic preventive maintenance activities and ensuring effective fault management in case of fault occurrence. He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF) as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS repair Technician’, this is an after sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual also and interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.

Television Installation Man installs and adjusts television receivers and antennas, using hand tools. Selects antenna according to type of set and location of transmitting station. Bolts cross arms and dipole elements in position to assemble antenna. Secures antenna in place with bracket and guy wires, observing insurance codes and local ordinances to protect installation from lighting and other hazards. Drills and waterproofs holes in building to make passage for transmission line. Connects line between receiver and antenna and fastens it in place. Tunes receiver on all channels and adjusts screws to obtain desired density, linearity, focus and size of picture. Orients antenna and installs reflector to obtain strongest possible reception.

Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole, using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools, test equipment.

Television Service and Repairman repairs and adjusts radios and television receivers, using hand tools and electronic testing instruments. Tunes receiver on all channels and observes audio and video characteristics to locate source of trouble. Adjusts controls to obtain desired density, linearity, focus and size of picture. Examines chassis for defects. Tests voltages and resistance of circuits to isolate defect following schematic diagram and using voltmeter, oscilloscope, signal generator and other electronic testing instruments. Tests and changes tubes, solders loose connections and repairs or replaces defective parts, using hand tools and soldering iron. Repair radios and other audio equipment.

Television Repair Technician job role is applicable to both Television manufacturing facilities as well as electronics service centres. This role pertains to rectify faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Fitter

Syllabus:

https://fitter.iti.directory/

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Fitter is powered by NCVT. ITI trade Fitter is a job oriented trade ITI trade Fitter is suitable for government job and private job. This ITI trade Fitter is very powerful for self-empowerment. This ITI trade Fitter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Fitters have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the following industries:

Production & Manufacturing industries.
Structural Fabrication like bridges, Roof structures, Building & construction.
Automobile and allied industries
Service industries like road transportation and Railways.
Ship building and repair
Infrastructure and defence organizations
In public sector industries like BHEL, BEML, NTPC, etc and private industries in India & abroad.
Self employment

International Comparability

Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
Can take admission in diploma course in notified branches of Engineering by lateral entry
Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering
Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Student Help Portal:

Horticulture

Syllabus:

Syllabus for ITI Trade Horticulture

Agriculture

Trades Duration:

One year

Trade Type:

Non Engineering

ITI trade Horticulture is powered by NCVT. ITI trade Horticulture is a job oriented trade ITI trade Horticulture is suitable for government job and private job. This ITI trade Horticulture is very powerful for self-empowerment. This ITI trade Horticulture is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

JOB ROLE

Gardener, General; (Mali General) grows flowers, trees, shrubs, seedlings, vegetables, etc. in public or private gardens. Prepares soil and sows seeds, plants, seedlings etc. Waters seed-beds and growing plants. Weeds and hoes garden and prunes hedges and bushes. Sprays and dusts pesticides and evolves other measures to protect plants from diseases and wild animals. Prepares soil and lays lawn. Waters mows and levels lawns. Prepares paths and ensures their proper up-keep. Collects and preserves seeds for sowing. Supervises labourers engaged for assistance. Keeps implements etc. in good working order. May maintain green house for display. May cultivate vegetables and fruit trees. May specialize in ornamental gardening. May work in nursery for improving variety of plants from seeds, cuttings, grafting or budding and be designated as MALI, NURSERY. May sell plants, buy seeds, fertilizers, insecticides, etc. May pay wages to labourers employed.

Nurseryman; Mali, Nursery manages nursery on own account, or on behalf of employer to grow trees, plants, flowers, shrubs, creepers, seeds, bulbs etc. in open air or green houses for sale to customers. Decides kind and number of plants to be grown and method of planting, cultivating and treatment based on soil, climatic conditions, irrigation facilities etc. Selects and purchases seeds, fertilizers, insecticide. Equipment and machinery and other items. Plans preparation of beds and method of planting, depending on type of plants to be grown. Prepares bed by various processes such as breaking soil, mixing fertilizers, etc. sows seeds, plants, seedlings, cuttings or propagates plants by grafting, budding and other methods and makes water channels. Watches growth of sapling, seedlings, grafts and plants. Hoes and prunes excess growth and off-shoots of plants, dusts and sprays pesticides and takes other measures to protect plants from pets, wild animals, etc. Observes development of plants. Develops methods of grafting and budding./ Collects and preserves seeds for sale. Hires labour if necessary and undertakes planting, weeding, pruning etc. as required. Supervises their work and trains them. Maintains buildings and equipment in good condition. Keeps records of cost and production statement. Sells seedling, seeds, bulbs etc. May specialize in landscape planting. marketing. Is designated as Planter, Tea; Planter, Coffee; Planter, Cinchona; Planter, Cocoa; Planter, Rubber according to type of crop grown

Machinist

Syllabus:

Syllabus for ITI Trade Machinist

Syllabus for ITI Trade Mechanic (Motor Vehicle)

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Machinist is powered by NCVT. ITI trade Machinist is a job oriented trade ITI trade Machinist is suitable for government job and private job. This ITI trade Machinist is very powerful for self-empowerment. This ITI trade Machinist is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:
• Machinist, Grinder, Operator of various types of power driven metal cutting or grinding machines in Production & Manufacturing industries,Infrastructure and defence organizations.
• Machinists have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.

International Comparability

1. Comparison Made with German Syllabus and the proposed syllabus is in line with the existing German Syllabus (Around 95% contents are matching).
2. However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
Can take admission in diploma course in notified branches of Engineering by lateral entry
Can become supervisor after doing part-time diploma in relevant branch of Engineering.
Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Mechanic (Motor Vehicle)

Syllabus:

Syllabus for ITI Trade Mechanic (Refrigeration and Air-Conditioning)

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Mechanic (Motor Vehicle) is powered by NCVT. ITI trade Mechanic (Motor Vehicle) is a job oriented trade ITI trade Mechanic (Motor Vehicle) is suitable for government job and private job. This ITI trade Mechanic (Motor Vehicle) is very powerful for self-empowerment. This ITI trade Mechanic (Motor Vehicle) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Installs, tests, maintains, repairs and replaces electrical Power distribution/power line equipments and fittings in factories, workshops, power house, business and residential premises etc. Manipulates controls to adjust and activate those equipments. Monitors and records control board/room readings, examines faults in control room and repairs substation equipments and panels to ensure proper operational efficiency.
Mechanic Motor Vehicle (MMV) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

Motor Vehicle Mechanics, Other
Mechanic, Automobile
Maintenance Technician – Service
Workshop
Auto Service Technician – Mechanic
Fitter Automobile

Mechanic (Refrigeration and Air-Conditioning)

Syllabus:

Syllabus for ITI Trade Mechanic (Tractor)

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Mechanic (Refrigeration and Air-Conditioning) is powered by NCVT. ITI trade Mechanic (Refrigeration and Air-Conditioning) is a job oriented trade ITI trade Mechanic (Refrigeration and Air-Conditioning) is suitable for government job and private job. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is very powerful for self-empowerment. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic (Tractor)

Syllabus:

Syllabus for ITI Trade Mechanic Agriculture Machinery

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Mechanic (Tractor) is powered by NCVT. ITI trade Mechanic (Tractor) is a job oriented trade ITI trade Mechanic (Tractor) is suitable for government job and private job. This ITI trade Mechanic (Tractor) is very powerful for self-empowerment. This ITI trade Mechanic (Tractor) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The trainee attending the course on ‘Mechanic Tractor’ shall be able to perform basic fitting , grinding, surface finishing, sheet metal, bending, and welding operations and carry out electrical/electronic, nondestructive, and battery tests, in an tractor workshop. The trainee shall be able to service cooling and lubrication systems, intake and exhaust systems, and fuel feed system, of the tractor. The trainee shall also be able to overhaul diesel engine, clutch and gearbox, differential and PTO Unit, steering system, assemblies of power tiller, implements, and charging and starting systems, of the tractor.
Mechanic Tractor repairs and overhauls tractors by various mechanical processes for agriculture, constructional and other heavy duties

Trade Syllabus (Practical):

Trade Practical (27 Hrs/week)

Familiarisation with institute, Job opportunities in the automobile sector, Machinery used in Trade. Types of work done by the students in the shop floor.

Practical related to Safety and Health, Importance of maintenance and cleanliness of Workshop. Interaction with health centre and fire service station to provide demo on First aid and Fire safety, Use of fire extinguishers. Demonstration on safe handling and Periodic testing of lifting equipment, and Safety disposal of Used engine oil. Energy saving Tips of ITI electricity Usage

Practice using all marking aids, like steel rule with spring calipers, dividers, scriber, punches, Chisel etc., Layout a work piece- for line, circle, arcs and circles. Practice to measure a wheel base of a vehicle with measuring tape. Practice to measure valve spring tension using spring tension tester Practice to remove wheel lug nuts with use of an air impact wrench Practice on General workshop tools & power tools.

Measuring practice on Cam height, Camshaft Journal dia, crankshaft journal dia, Valve stem dia, piston diameter, and piston pin dia with outside Micrometers. Measuring practice on the height of the rotor of an oil pump from the surface of the housing or any other auto component measurement with depth micrometer. Measuring practice on valve spring free length. Measuring practice on cylinder bore, Connecting rod bore, inside diameter (ID) of a camshaft bearing with Telescope gauges. Measuring practice on cylinder bore for taper and out-of-round with Dial bore gauges. Measuring practice to measure wear on crankshaft end play, crankshaft run out, and valve guide with dial indicator. Measuring practice to check the flatness of the cylinder head is warped or twisted with straightedge is used with a feeler gauge. Measuring practice to check the end gap of a piston ring, piston-tocylinder wall clearance with feeler gauge. Practice to check engine manifold vacuum with vacuum gauge. Practice to check the air pressure inside the vehicle tires is maintained at the recommended setting

Practice on General cleaning, checking and use of nut, bolts, & studs etc., Removal of stud/bolt from blind hole. Practice on cutting tools like Hacksaw, file, chisel, Sharpening of Chisels, center punch, safety precautions while grinding. Practice on Hacksawing and filing to given dimensions.

Practice on Marking and Drilling clear and Blind Holes, Sharpening of Twist Drills Safety precautions to be observed while using a drilling machine. Practice on Tapping a Clear and Blind Hole, Selection of tape drill Size, use of Lubrication, Use of stud extractor. Cutting Threads on a Bolt/ Stud. Adjustment of two piece Die, Reaming a hole/ Bush to suit the given pin/ shaft, scraping a given machined surface.

Practice on making Rectangular Tray. Pipe bending, Fitting nipples unions in pipes. Soldering and Brazing of Pipes.

Practice in joining wires using soldering Iron, Construction of simple electrical circuits, Measuring of current, voltage and resistance using digital multimeter, practice continuity test for fuses, jumper wires, fusible links, circuit breakers.

Diagnose series, parallel, seriesparallel circuits using Ohm’s law, Check electrical circuit with a test lamp, perform voltage drop test in circuits using multimeter, measure current flow using multimeter /ammeter, use of service manual wiring diagram for troubleshooting.

Cleaning and topping up of a lead acid battery, Testing battery with hydrometer, Connecting battery to a charger for battery charging, Inspecting & testing a battery after charging, Measure and Diagnose the cause(s) of excessive Key-off battery drain (parasitic draw) and do corrective action. Testing of relay and solenoids and its circuit.

Identify and test power and signal connectors for continuity, Identify and test different type of Diodes, NPN & PNP Transistors for its functionality, Construct and test simple logic circuits OR, AND & NOT and Logic gates using switches.

Practice to make straight beads and Butt, Lap & T joints Manual Metal Arc Welding. Setting of Gas welding flames, practice to make a straight beads and joints Oxy – Acetylene welding Film on Heat treatment process

Practice on Liquid penetrant testing method and Magnetic particle testing method. Identification of Hydraulic and pneumatic components used in vehicle. Tracing of hydraulic circuit on hydraulic jack, hydraulic power steering, and Brake circuit. Identification of components in Air brake systems.

Mechanic Agriculture Machinery

Syllabus:

Syllabus for ITI Trade Mechanic Auto Electrical and Electronics

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Mechanic Agriculture Machinery is powered by NCVT. ITI trade Mechanic Agriculture Machinery is a job oriented trade ITI trade Mechanic Agriculture Machinery is suitable for government job and private job. This ITI trade Mechanic Agriculture Machinery is very powerful for self-empowerment. This ITI trade Mechanic Agriculture Machinery is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic Agriculture Machinery maintains, services, repairs or overhauls different farm equipment such as Tractors, Power tillers, Sprayers, Drillers, etc. Responsible to Plan and organize assigned work and detect & resolve issues during execution with safety measures.

Mechanic Agriculture Machinery has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

a) Wage Employment

Astt. Mechanic in Farm machinery
Agricultural machinery/ Tractor Service Mechanic
Dealers service mechanic Spare Parts
Sales Assistant

b) Self Employment

Agricultural Machinery Mechanic
Tractor Operator
Spare Parts Salesman

Mechanic Auto Electrical and Electronics

Syllabus:

Syllabus for ITI Trade Mechanic Computer Hardware

Trades Duration:

One year

Minimum Qualification Eligibility:

10th Passed under 10+2 System

Trade Type:

Engineering

ITI trade Mechanic Auto Electrical and Electronics is powered by NCVT. ITI trade Mechanic Auto Electrical and Electronics is a job oriented trade ITI trade Mechanic Auto Electrical and Electronics is suitable for government job and private job. This ITI trade Mechanic Auto Electrical and Electronics is very powerful for self-empowerment. This ITI trade Mechanic Auto Electrical and Electronics is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion of the above course, the trainee shall be able to perform the following skills with proper sequence.

Installs, repairs replaces and overhauls wiring, starters, generators, distributors and other electrical equipment of motor vehicles.

Examines vehicle battery, checks voltage and specific gravity using special equipment such as voltmeter hydrometer, heavy discharge tester, etc. and ensures that battery is in good condition.
Checks vehicle wiring, locates faults and rectifies defects by replacing damaged wire or connecting ends with insulation tape.
Starts engine to check whether alternator is charging correctly, and if distributor, condenser coil and cut out are functioning properly.
Estimates nature of defects and reports components to be replaced or repaired.
Dismantles and repairs electrical units and components such s generator, distributor etc. where required.
Replaces repaired kit or unit in vehicle and connects it with battery.
Conducts thorough examination of various electrical fittings such as lights, panel indicators, fuel pumps, etc and rectifies defects.
Checks condition and makes necessary adjustments. May do armature winding. May drive vehicles on road. May charge batteries.
Fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use.
Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; Installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment;
Dismantles equipment if required and replaces faulty parts or wiring

Mechanic Computer Hardware

Syllabus:

IT-ITeS

Trades Duration:

1 Year 3 Months

Trade Type:

Engineering

ITI trade Mechanic Computer Hardware is powered by NCVT. ITI trade Mechanic Computer Hardware is a job oriented trade ITI trade Mechanic Computer Hardware is suitable for government job and private job. This ITI trade Mechanic Computer Hardware is very powerful for self-empowerment. This ITI trade Mechanic Computer Hardware is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic Consumer Electronics

Trade Type:

Engineering

Mechanic Diesel

Syllabus:

Syllabus for ITI Trade Mechanic Diesel

Syllabus for ITI Trade Mechanic Radio & T.V.

Trades Duration:

One year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Mechanic Diesel is powered by NCVT. ITI trade Mechanic Diesel is a job oriented trade ITI trade Mechanic Diesel is suitable for government job and private job. This ITI trade Mechanic Diesel is very powerful for self-empowerment. This ITI trade Mechanic Diesel is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Repairs, services and overhauls diesel or oil engines for efficient performance as prime mover to drive different machineries and equipments. Examines engine by dismantling it for locating defects and for necessary repair/replacement and then reassemble it ensuring accuracy of fittings and performance as per specified standards. Checks, adjusts and lubricates engine periodically and performs such other functions to keep engine in good working order.

On successful completion of this course the candidates shall be gainfully employed as:

1. Mechanic of Diesel Engine, Oil Engine in Automobile Industries
2. Fitter of diesel or oil engines
3. Self-Employment
4. Instructor of Diesel Mechanic after doing CITS course under NCVT

Mechanic Diesel has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

Mechanic
Diesel Engine.

Mechanic Radio & T.V.

Syllabus:

Syllabus for ITI Trade Plumber

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Mechanic Radio & T.V. is powered by NCVT. ITI trade Mechanic Radio & T.V. is a job oriented trade ITI trade Mechanic Radio & T.V. is suitable for government job and private job. This ITI trade Mechanic Radio & T.V. is very powerful for self-empowerment. This ITI trade Mechanic Radio & T.V. is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Plumber

Syllabus:

Plumbing

Trades Duration:

One year

Minimum Qualification Eligibility:

10th Passed under 10+2 System

Trade Type:

Engineering

ITI trade Plumber is powered by NCVT. ITI trade Plumber is a job oriented trade ITI trade Plumber is suitable for government job and private job. This ITI trade Plumber is very powerful for self-empowerment. This ITI trade Plumber is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Plumber trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional - skills and knowledge, while Core area (Workshop Calculation science, Engineering Drawing and Employability Skills) imparts requisite core skills, knowledge and life skills. After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Plumber assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Responsible for installation, operation and repair of plumbing system used in housing, commercial and institutional setups, drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc., maintenance and servicing of pipes and sanitary fixtures.

Plumber has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

Plumber, General
Plumber, Operations
Plumber, General-Installation and Repair
Plumber, General Helper
Plumber, General Assistant
Plumber, Maintenance and Servicing Assistant
Plumber, Maintenance and Servicing
Pipe Layer/Plumber Pipeline
Pipe Fitter
Plumbers and Pipe Fitters, Other
Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant
Plumber (Welder) Assistant
Plumber (Pumps and E/M Mechanic)

JOB ROLE

Plumber, General; lays out, assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Receives instructions from Sanitary Engineer or Civil Engineer regarding lay out of pipes, gas or water mains, position of fixtures and fittings, etc. Examines drawings or other specifications regarding size and dimensions of area where sanitary fittings or pipe are to be fitted or laid. Marks points at places to indicate position for fixing brackets and laying pipes. Drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc. to keep or hold fittings and fixtures in position, using nuts, bolts, clamps etc. and tightens them with hand tools. Cuts reams, threads and bends pipes as appropriate. Ensures that pipe lines are laid properly by Pipe Fitter. Joins pipes with sockets, Tees, elbow etc. or with molten lead or lead wool. Caulks joints (operation of making joint seam tight to withstand pressure) and tests them for leaks with pneumatic or hydraulic pressure. May repair and maintain sewerage and pipe lines by replacing washers on leaky faucets, mending burst pipes, opening clogged drains, etc. May do lead burning, dressing and bossing of lead pipe and sheet lead, inlaying of wooden tanks, construction of septic tanks etc

Plumber, Operations; is responsible for operation of plumbing system used in housing, commercial and institutional setups.

Plumber, General-Installation and Repair; Plumber (General)-II is responsible for installation and repair plumbing systems including those of advanced sanitary fixtures as per manufacturer͛s specifications in housing, commercial and institutional setups.

Plumber, General Helper; is responsible for helping Plumber (General) by carrying and handling of tools and materials required in installation, minor repair and maintenance of plumbing systems.

Plumber, General Assistant; is responsible for assistance in, preliminary installation and minor repair work of basic plumbing systems in domestic, commercial and institutional setups.

Plumber, Maintenance and Servicing Assistant; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Plumber, Maintenance and Servicing; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Pipe Layer/Plumber Pipeline; Sewer Pipe Layer lays concrete, stone ware or clay pipes to form sanitary drains and sewers. Receives instructions regarding size and type of concrete, stone ware or clay pipe to be laid. Digs or gets earth dug along marked lines using spade, picks etc. to make trenches for laying pipes. Levels and smoothens bottom of trenches to proper gradient by scooping with shovels. Receives pipes of required size lowered into trench manually or by pulley and adjusts their position by hand or crow-bar for correct levelling and vertical and horizontal alignment. Joints pipes together using appropriate couplings, joints, rings etc. and closes joints by caulking with fibre and cement to prevent leakage. Tests joints by hydraulic or pneumatic pressure after sealing. Fills trench with earth to cover laid pipe and rams earth to avoid sinking. Is designated as PIPE LAYER WATERMAINS or WATER MAINS FITTER if engaged in laying cast iron or galvanized iron water pipe mains and in caulking their joints with lead to prevent leakage. May lay pipe lines to provide water connection to houses, sanitary sewers etc. May fix meters to stopcocks, remove defects from pipe lines and replace defective ones.

Pipe Fitter; lays, repairs and maintains, pipes for supply of water, gas, oil or steam in buildings, gardens, workshops, stores, ships etc., according to drawings or instructions. Examines drawings and other specifications or receives relevant instructions. Cuts passage holes for laying pipes in walls and floors. Cuts reams, threads and bends pipes according to specifications. Lays pipes in cut passage and assembles pipe sections with couplings, sockets, Tee's elbows etc. Levels position of pipes using sprit level for gravitational flow. Caulks joints, tests them for leakage with pneumatic or hydraulic pressure and secures pipe line to structure with clamps, brackets, and hangers. Fits water meters, taps etc. to pipe where necessary. Repairs and replaces leaky pipe lines, taps and joints and provides connections to overhead water tanks. Helps Plumber, General in fittings sanitary fittings to buildings. May join pipe sections and fittings.

Plumbers and Pipe Fitters, Other; perform number of routine and low skilled tasks such as assisting in laying pipes, making water tight joints, fitting sockets and reducers, threading pipes with taps and dies, removing leakages, etc., and are designated as Plumber Mate or Pipe Fitter Helper according to type of work done.

Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant; is responsible for welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Welder) Assistant; is responsible for assistance in welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Pumps and E/M Mechanic); is responsible for installation and repair of Pumps and E/M equipment used for different plumbing applications of housing, commercial and institutional Set ups.

Sheet Metal Worker

Syllabus:

Syllabus for ITI Trade Sheet Metal Worker

Syllabus for ITI Trade Stenographer & Secretarial Assistant (English)

Trades Duration:

One year

Minimum Qualification Eligibility:

8th Passed

Trade Type:

Engineering

ITI trade Sheet Metal Worker is powered by NCVT. ITI trade Sheet Metal Worker is a job oriented trade ITI trade Sheet Metal Worker is suitable for government job and private job. This ITI trade Sheet Metal Worker is very powerful for self-empowerment. This ITI trade Sheet Metal Worker is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

SHEET METAL WORKER has a wide scope of Employability ranging from selfemployment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

Sheet Metal Worker, General/Sheet Metal Worker – Hand Tools and Manually Operated Machines

Stenographer & Secretarial Assistant (English)

Syllabus:

Management

Trades Duration:

One year

Minimum Qualification Eligibility:

10th Passed

Trade Type:

Non Engineering

ITI trade Stenographer & Secretarial Assistant (English) is powered by NCVT. ITI trade Stenographer & Secretarial Assistant (English) is a job oriented trade ITI trade Stenographer & Secretarial Assistant (English) is suitable for government job and private job. This ITI trade Stenographer & Secretarial Assistant (English) is very powerful for self-empowerment. This ITI trade Stenographer & Secretarial Assistant (English) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Stenographer Secretarial Assistant (English) trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while the core area (Employability Skill) imparts requisite core skills, knowledge, and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the senior
Stenographer Secretarial Assistant (English)
has a wide scope of Employability ranging from self-employment, contractual employment. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

Private Secretary
Personal Secretary
Secretaries, Other

JOB ROLE

Correspond through emails, phone and faxes
Maintaining and updating filing systems
Coordinating with department heads to ensure smooth working of the organization
Handling day-to-day administrative duties of the organization
Making arrangement for meetings, conference and seminars
Handling various activities within and outside the organization
Taking dictation in shorthand and operating typewriter for transcribing dictated materials
Handled and maintained correspondence files and other official documents
Made travel bookings for domestic and international services
Drafted business letters in clear and precise manner for easy understanding
Coordinated business meetings and wrote minutes of meetings in shorthand
Handled confidential information of the organization
Prepared reports and documents for inter-department
Handled day-to-day activities of the organization
Prepared various presentations for the management team

Surveyor

Syllabus:

Syllabus for ITI Trade Surveyor

Construction

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System

Trade Type:

Engineering

ITI trade Surveyor is powered by NCVT. ITI trade Surveyor is a job oriented trade ITI trade Surveyor is suitable for government job and private job. This ITI trade Surveyor is very powerful for self-empowerment. This ITI trade Surveyor is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After completion of the course one should be able to perform and survey work and handling of different types of tools, equipments and instruments used in surveying and application of Total station, different types of Leveling and Theodolite.

Surveyor has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

Technician Power Electronics System

Syllabus:

Syllabus for ITI Trade Technician Power Electronics System

Syllabus for ITI Trade Turner

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System

Trade Type:

Engineering

During the two years duration of Technician Power Electronics Systems trade, a candidate is trained on Professional Skill, Professional Knowledge, Engineering Drawing, Workshop Calculation & Science and Employability Skill. In addition to this, a candidate is entrusted to undertake project work and extracurricular activities to build up confidence. The broad components covered related to the trade are categorized in four semesters each of six months duration. The semester wise course coverage is categorized as below:

1stSemester – In this semester, the trainee learns about safety and environment, use of fire extinguishers, artificial respiratory resuscitation to begin with. He gets the idea of trade tools & its standardization, familiarize with basics of electricity, test the cable and measure the electrical parameter. Skilling practice on different types & combination of cells for operation and maintenance of batteries being done. Identify and test passive and active electronic components. Construct and and de-soldering of various PCBs. Assemble a computerest unregulated and regulated power supplies. Practice soldering types of electrical and electronic components on through-hole system, install OS, Practice with MS office. Use the internet, browse, create mail IDs, download desired data from internet using search engines.

2nd Semester - In this semester, the candidate will be able to construct and test amplifier, oscillator and wave shaping circuits. Testing of power electronic components. Construct and test power control circuits. Identify and test opto-electronic devices. Able to achieve the skill on SMD Soldering and De-soldering of discrete SMD components. Verifying the truth tables of various digital 1Cs by referring Data book. ractice circuit simulation software to simulate and test various circuits. Identify various types of LEDS, LED displays and interface them to a digital counter and test. Construct and test various circuits using linear ICs 741 & 555.

3rd Semester - In this semester, the trainee will be able to operate DSO and perform various functions. Gaining the skill by practicing SMD Soldering and De-soldering. Introduction with protection devices. Familiarize with the instruction set of 8051 microcontroller. Interface a model application with the Microcontroller kit and run the application. Working with three phase rectifier, chopper, SMPS, inverters and UPS. Interpret electrical control circuits used in industries. Installation and setup of fibre-optic communication system. Identify construction of various electro-pneumatic circuits. Make simple project applications using 1Cs, transformer and other discrete components.

4th Semester – In this semester, the trainee will work on installing a solar panel, execute testing and evaluate performance by connecting the panel to the inverter. Operation of different process sensor, identify, wire & test various sensors of different industrial processes by selecting appropriate test instruments. Assemble, test & troubleshoot various digital controlled field devices and execute the result. Perform speed control of DC machine and single phase and 3-phase AC machines. Install, configure and check the performance of AC and DC drive to control the speed. Perform speed control of servo motor and test different industrial process circuit by selecting the suitable function. Install, test & control the Electro-Pneumatic actuators using various pneumatic valves. Execute the operation of different indication on PLC modules and wire different field devices of PLC and configure the system and perform the suitable function.

JOB ROLE

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics Mechanic; Electronic Equipment Mechanic repairs electronic equipment, such as computers, industrial controls, transmitters and telemetering control systems following blueprints and manufacturer's specifications and using hand tools and test instruments. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Optical Fiber Technician is responsible for maintaining uptime and quality of the network segment (both optical media and equipment) assigned to him by undertaking periodic preventive maintenance activities and ensuring effective fault management in case of fault occurrence. He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF) as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS Repair Technician’, this is an after sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual also interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan.

PLC Assembly Operator; is responsible for completing the printed circuit board (PCB) and box assembly of the PLC components. The individual at work assembles the power supply and micro-controller PCBs, sends them for programming and completes the box assembly thereafter.

Turner

Syllabus:

Syllabus for ITI Trade Welder

Trades Duration:

Two Year

Minimum Qualification Eligibility:

10th Passed under 10+2 System with Science & Maths

Trade Type:

Engineering

ITI trade Turner is powered by NCVT. ITI trade Turner is a job oriented trade ITI trade Turner is suitable for government job and private job. This ITI trade Turner is very powerful for self-empowerment. This ITI trade Turner is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion the passed out trainee

1. Can work in the industry as skilled turner.
2. Can work in the field of basic fitting, lathe, drilling, Inspection & measurement observing safety precautions.
3. Can perform all the turning operations on lathe & perform simple programming & operations on a CNC lathe.
4. Can handle different type of Fire extinguishers & personal protective equipment.

Welder

Syllabus: