Govt. I.T.I.Malout Road, Fazilka

get iti website @ 1800/-

 

 

Govt. I.T.I.Malout Road, Fazilka is situated in Fazilka Punjab. Govt. I.T.I.Malout Road, Fazilka is Industrial Training Institute under NCVT Govt. I.T.I.Malout Road, Fazilka. Location of Govt. I.T.I.Malout Road, Fazilka is Malout Road Fazilka Fazilka Punjab.

Institute Type: 

Government ITI

Government ITI is leading educational organisatin in india. Teching facualty of Government ITI is suprimo. ITI is  providing latest Job oriened cource for student. This Government ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme .

Estd: 
01-Aug-1963
ITI code: 
GU03000044
Contact No: 
01638-262857
Address: 
Malout Road Fazilka
Punjab District: 
Pin Code: 
152123
State: 
Punjab
State: 

Punjab

The Department of Technical Education & Industrial Training was created on 10.06.1977 in its present form after detaching the Technical Education Wing from the Department of Punjab, P.W.D. (B&R) and detaching the Industrial Training Wing from the Department of industries thereby bringing both the wings under one umbrella though each of these two wings are more than 50 years old.

The Industrial Training Wing of Department of Technical Education and Industrial Training has been entrusted with the responsibility of imparting vocational training in Engineering and non-engineering trades under craftsman training scheme & Applied training scheme to cater the need of the industry in respect of skilled workers. All the Industrial Training Institutes centre work under Craftsman Training Scheme of Government of India, Director - General Employment & Training under the directions of National Council of Vocational Training which is the apex body at Government of India level for coordinating development of Vocational Training in the country. Similar to the National Council for Vocational Training at Central level, State Council for Vocational Training the State level is responsible for coordinating an integrated development of Vocational Training

Reff: https://itipunjab.nic.in/genregsys/Candidate/Default.aspx

Trade: 

Carpenter

ITI trade Carpenter
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Carpenter is powered by NCVT.  ITI trade Carpenter  is a job oriented trade ITI trade Carpenter is suitable for government job and private job. This ITI trade Carpenter is very powerful for self-empowerment. This ITI trade Carpenter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Carpenter has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Carpenter
  • Carpenter Construction

Draughtsman (Civil)

ITI trade Draughtsman (Civil)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Draughtsman (Civil) is powered by NCVT.  ITI trade Draughtsman (Civil)  is a job oriented trade ITI trade Draughtsman (Civil) is suitable for government job and private job. This ITI trade Draughtsman (Civil) is very powerful for self-empowerment. This ITI trade Draughtsman (Civil) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

This course is meant for the candidates who aspire to become Civil Draughtsmen whose job roles include planning and drawing sketches of residential buildings from given data, preparing working drawings of all types of buildings from line sketches in CAD, Planning, drawing, estimating, and costing of civil work, drawing plans by using CAD, and making of 3D models of civil work. Giving setting out of site, supervision of civil work etc.

International Comparability

  • Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education.
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering after which they will be employed in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed preferably in construction industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the trade for becoming instructor in ITIs.

Electrician

ITI trade Electrician
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Electrician is powered by NCVT.  ITI trade Electrician  is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

  • Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. 
  •  After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board. 
  • They can set up their own Rewinding and servicing of Domestic Equipment shop.  
  • Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various  Industries etc
  • They can also go for further higher studies after successful completion of course.
  • Students who have completed this course have found employment in the following areas:
  • Service/Maintenance Technician for domestic appliances in Reputed Companies
  • Winder of Electrical Motors in winding shop
  • Contractor for domestic wiring and industrial wiring
  • Armature winder of Electrical fans and motors
  • Electrical appliance repair in electrical shops
  • Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
  • Local Electricity Board
  • Assembler of Electrical control Gears
  • Telephone Department
  • Installation and Testing division of Auditorium and Cinema Hall
  • Factories
  • As Instructor in Govt./Private ITI/ITC
  • Merchant Navy
  • Indian Air Force
  • Self-Employment in Service Centre

Electronics Mechanic

ITI trade Electronics Mechanic
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Electronics Mechanic is powered by NCVT.  ITI trade Electronics Mechanic  is a job oriented trade ITI trade Electronics Mechanic is suitable for government job and private job. This ITI trade Electronics Mechanic is very powerful for self-empowerment. This ITI trade Electronics Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Brief description of job roles:

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis  or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics  Mechanic;  Electronic  Equipment  Mechanic  repairs  electronic  equipment,  such  as computers, industrial controls, transmitters, and telemetering control systems following blueprints and   manufacturer's   specifications   and   using   hand   tools   and   test   instruments.   Tests  faulty equipment  and  applies  knowledge  of  functional  operation  of  electronic  units  and  systems  to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Radio Technician (Radio Manufacturing) tests assembled radio sets with testing equipment to ensure that assembly soldering, frequency, performance, etc. are in accordance with prescribed standards. Places assembled radio set in position and visually examines it to ensure that position of components,  connections, soldering,  wiring,  etc.  are in order.  Switches  on and operates different knobs  to  check  calibration,  audibility  and  general  performance  of  set  by  varying  its  tone  and listening to various stations and frequencies. Tightens loose nuts and screws,  locates  faults,  replaces defective components and conducts necessary changes.  Approves  correctly  assembled sets for further processing and rejects defective ones for rectification. May tests sets at different stages of assembly. May service, repair and overhaul radio sets.

Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work  checks  the  installation  site,  understands  the  layout  requirement  as  per  design,  assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.

Optical  fibre  technician  is  responsible for  maintaining uptime and quality of the network segment (both   optical   media   and   equipment)   assigned   to   him   by   undertaking   periodic   preventive maintenance activities  and  ensuring  effective fault management in  case  of  fault occurrence.  He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF)  as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS repair Technician’, this is an  after  sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual  also  and  interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.

Television Installation Man installs and adjusts television receivers and antennas, using hand tools. Selects antenna according to type of set and location of transmitting station. Bolts cross arms and dipole elements in position to assemble antenna. Secures antenna in place with bracket and guy wires, observing insurance codes and local ordinances to protect installation  from  lighting  and other hazards. Drills and waterproofs holes in building to make passage for transmission line. Connects line between receiver and antenna and fastens it in place. Tunes receiver on all channels and adjusts  screws to obtain desired density, linearity, focus and size of picture. Orients antenna  and installs reflector to obtain strongest possible reception.

Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole,    using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools,  test equipment.

Television Service and Repairman repairs and adjusts radios and television receivers, using hand tools and electronic testing instruments. Tunes receiver on all channels and observes audio and video characteristics to locate source of trouble. Adjusts controls to obtain desired  density,  linearity, focus and size of picture. Examines chassis for defects. Tests voltages and resistance of circuits to isolate defect following schematic diagram and using voltmeter, oscilloscope, signal generator and other electronic testing instruments. Tests and changes tubes, solders loose connections and repairs or replaces defective parts, using hand tools and soldering iron. Repair radios and other audio equipment.

Television  Repair  Technician job role is applicable to both Television manufacturing facilities as  well as electronics service centres. This role pertains to rectify faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

Fitter

ITI trade Fitter
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Fitter is powered by NCVT.  ITI trade Fitter  is a job oriented trade ITI trade Fitter is suitable for government job and private job. This ITI trade Fitter is very powerful for self-empowerment. This ITI trade Fitter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Fitters have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the following industries:

  • Production & Manufacturing industries.
  • Structural Fabrication like bridges, Roof structures, Building & construction.
  • Automobile and allied industries
  • Service industries like road transportation and Railways.
  • Ship building and repair
  • Infrastructure and defence organizations
  • In public sector industries like BHEL, BEML, NTPC, etc and private industries in India & abroad.
  • Self employment

International Comparability

  • Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
  • However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.
     

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Machinist

ITI trade Machinist
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Machinist is powered by NCVT.  ITI trade Machinist  is a job oriented trade ITI trade Machinist is suitable for government job and private job. This ITI trade Machinist is very powerful for self-empowerment. This ITI trade Machinist is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

On successful completion of this course, the candidates shall be gainfully employed as:
• Machinist, Grinder, Operator of various types of power driven metal cutting or grinding machines in Production & Manufacturing industries,Infrastructure and defence organizations.
• Machinists have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.

International Comparability

  • 1. Comparison Made with German Syllabus and the proposed syllabus is in line with the existing German Syllabus (Around 95% contents are matching).
  • 2. However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.

Progression Pathway

  • Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
  • Can take admission in diploma course in notified branches of Engineering by lateral entry
  • Can become supervisor after doing part-time diploma in relevant branch of Engineering.
  • Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
  • Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor

Mechanic (Motor Vehicle)

ITI trade Mechanic (Motor Vehicle)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Motor Vehicle) is powered by NCVT.  ITI trade Mechanic (Motor Vehicle)  is a job oriented trade ITI trade Mechanic (Motor Vehicle) is suitable for government job and private job. This ITI trade Mechanic (Motor Vehicle) is very powerful for self-empowerment. This ITI trade Mechanic (Motor Vehicle) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Installs, tests, maintains, repairs and replaces electrical Power distribution/power line equipments and fittings in factories, workshops, power house, business and residential premises etc. Manipulates controls to adjust and activate those equipments. Monitors and records control board/room readings, examines faults in control room and repairs substation equipments and panels to ensure proper operational efficiency.   
Mechanic Motor Vehicle (MMV) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Motor Vehicle Mechanics, Other 
  • Mechanic, Automobile 
  • Maintenance Technician – Service 
  • Workshop 
  • Auto Service Technician – Mechanic 
  • Fitter Automobile
     

Mechanic (Refrigeration and Air-Conditioning)

Mechanic (Refrigeration and Air-Conditioning)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Refrigeration and Air-Conditioning) is powered by NCVT.  ITI trade Mechanic (Refrigeration and Air-Conditioning)  is a job oriented trade ITI trade Mechanic (Refrigeration and Air-Conditioning) is suitable for government job and private job. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is very powerful for self-empowerment. This ITI trade Mechanic (Refrigeration and Air-Conditioning) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic (Tractor)

ITI trade Mechanic (Tractor)
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic (Tractor) is powered by NCVT.  ITI trade Mechanic (Tractor)  is a job oriented trade ITI trade Mechanic (Tractor) is suitable for government job and private job. This ITI trade Mechanic (Tractor) is very powerful for self-empowerment. This ITI trade Mechanic (Tractor) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The trainee attending the course on ‘Mechanic Tractor’ shall be able to perform basic fitting , grinding, surface finishing, sheet metal, bending, and welding operations and carry out electrical/electronic, nondestructive, and battery tests, in an tractor workshop. The trainee shall be able to service cooling and lubrication systems, intake and exhaust systems, and fuel feed system, of the tractor. The trainee shall also be able to overhaul diesel engine, clutch and gearbox, differential and PTO Unit, steering system, assemblies of power tiller, implements, and charging and starting systems, of the tractor. 
Mechanic Tractor repairs and overhauls tractors by various mechanical processes for agriculture, constructional and other heavy duties

Trade Syllabus (Practical): 

Trade Practical (27 Hrs/week)

Familiarisation with institute, Job opportunities in the automobile sector, Machinery used in Trade. Types of work done by the students in the shop floor.

Practical related to Safety and Health, Importance of maintenance and cleanliness of Workshop. Interaction with health centre and fire service station to provide demo on First aid and Fire safety, Use of fire extinguishers. Demonstration on safe handling and Periodic testing of lifting equipment, and Safety disposal of Used engine oil. Energy saving Tips of ITI electricity Usage

Practice using all marking aids, like steel rule with spring calipers, dividers, scriber, punches, Chisel etc., Layout a work piece- for line, circle, arcs and circles. Practice to measure a wheel base of a vehicle with measuring tape. Practice to measure valve spring tension using spring tension tester Practice to remove wheel lug nuts with use of an air impact wrench Practice on General workshop tools & power tools.

Measuring practice on Cam height, Camshaft Journal dia, crankshaft journal dia, Valve stem dia, piston diameter, and piston pin dia with outside Micrometers. Measuring practice on the height of the rotor of an oil pump from the surface of the housing or any other auto component measurement with depth micrometer. Measuring practice on valve spring free length. Measuring practice on cylinder bore, Connecting rod bore, inside diameter (ID) of a camshaft bearing with Telescope gauges. Measuring practice on cylinder bore for taper and out-of-round with Dial bore gauges. Measuring practice to measure wear on crankshaft end play, crankshaft run out, and valve guide with dial indicator. Measuring practice to check the flatness of the cylinder head is warped or twisted with straightedge is used with a feeler gauge. Measuring practice to check the end gap of a piston ring, piston-tocylinder wall clearance with feeler gauge. Practice to check engine manifold vacuum with vacuum gauge. Practice to check the air pressure inside the vehicle tires is maintained at the recommended setting

Practice on General cleaning, checking and use of nut, bolts, & studs etc., Removal of stud/bolt from blind hole. Practice on cutting tools like Hacksaw, file, chisel, Sharpening of Chisels, center punch, safety precautions while grinding. Practice on Hacksawing and filing to given dimensions.

Practice on Marking and Drilling clear and Blind Holes, Sharpening of Twist Drills Safety precautions to be observed while using a drilling machine. Practice on Tapping a Clear and Blind Hole, Selection of tape drill Size, use of Lubrication, Use of stud extractor. Cutting Threads on a Bolt/ Stud. Adjustment of two piece Die, Reaming a hole/ Bush to suit the given pin/ shaft, scraping a given machined surface.

Practice on making Rectangular Tray. Pipe bending, Fitting nipples unions in pipes. Soldering and Brazing of Pipes.

Practice in joining wires using soldering Iron, Construction of simple electrical circuits, Measuring of current, voltage and resistance using digital multimeter, practice continuity test for fuses, jumper wires, fusible links, circuit breakers.

Diagnose series, parallel, seriesparallel circuits using Ohm’s law, Check electrical circuit with a test lamp, perform voltage drop test in circuits using multimeter, measure current flow using multimeter /ammeter, use of service manual wiring diagram for troubleshooting.

Cleaning and topping up of a lead acid battery, Testing battery with hydrometer, Connecting battery to a charger for battery charging, Inspecting & testing a battery after charging, Measure and Diagnose the cause(s) of excessive Key-off battery drain (parasitic draw) and do corrective action. Testing of relay and solenoids and its circuit.

Identify and test power and signal connectors for continuity, Identify and test different type of Diodes, NPN & PNP Transistors for its functionality, Construct and test simple logic circuits OR, AND & NOT and Logic gates using switches.

Practice to make straight beads and Butt, Lap & T joints Manual Metal Arc Welding. Setting of Gas welding flames, practice to make a straight beads and joints Oxy – Acetylene welding Film on Heat treatment process

Practice on Liquid penetrant testing method and Magnetic particle testing method. Identification of Hydraulic and pneumatic components used in vehicle. Tracing of hydraulic circuit on hydraulic jack, hydraulic power steering, and Brake circuit. Identification of components in Air brake systems. 

 

 

Mechanic Radio & T.V.

ITI trade Mechanic Radio & T.V.
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Mechanic Radio & T.V. is powered by NCVT.  ITI trade Mechanic Radio & T.V.  is a job oriented trade ITI trade Mechanic Radio & T.V. is suitable for government job and private job. This ITI trade Mechanic Radio & T.V. is very powerful for self-empowerment. This ITI trade Mechanic Radio & T.V. is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Plumber

ITI trade Plumber
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Plumber is powered by NCVT.  ITI trade Plumber  is a job oriented trade ITI trade Plumber is suitable for government job and private job. This ITI trade Plumber is very powerful for self-empowerment. This ITI trade Plumber is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Plumber trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional - skills and knowledge, while Core area (Workshop Calculation science, Engineering Drawing and Employability Skills) imparts requisite core skills, knowledge and life skills. After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Plumber assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Responsible for installation, operation and repair of plumbing system used in housing, commercial and institutional setups, drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc., maintenance and servicing of pipes and sanitary fixtures. 

Plumber has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Plumber, General
  • Plumber, Operations
  • Plumber, General-Installation and Repair
  • Plumber, General Helper
  • Plumber, General Assistant
  • Plumber, Maintenance and Servicing Assistant
  • Plumber, Maintenance and Servicing
  • Pipe Layer/Plumber Pipeline
  • Pipe Fitter
  • Plumbers and Pipe Fitters, Other
  • Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant
  • Plumber (Welder) Assistant
  • Plumber (Pumps and E/M Mechanic)

JOB ROLE

Plumber, General; lays out, assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Receives instructions from Sanitary Engineer or Civil Engineer regarding lay out of pipes, gas or water mains, position of fixtures and fittings, etc. Examines drawings or other specifications regarding size and dimensions of area where sanitary fittings or pipe are to be fitted or laid. Marks points at places to indicate position for fixing brackets and laying pipes. Drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc. to keep or hold fittings and fixtures in position, using nuts, bolts, clamps etc. and tightens them with hand tools. Cuts reams, threads and bends pipes as appropriate. Ensures that pipe lines are laid properly by Pipe Fitter. Joins pipes with sockets, Tees, elbow etc. or with molten lead or lead wool. Caulks joints (operation of making joint seam tight to withstand pressure) and tests them for leaks with pneumatic or hydraulic pressure. May repair and maintain sewerage and pipe lines by replacing washers on leaky faucets, mending burst pipes, opening clogged drains, etc. May do lead burning, dressing and bossing of lead pipe and sheet lead, inlaying of wooden tanks, construction of septic tanks etc

Plumber, Operations; is responsible for operation of plumbing system used in housing, commercial and institutional setups.

Plumber, General-Installation and Repair; Plumber (General)-II is responsible for installation and repair plumbing systems including those of advanced sanitary fixtures as per manufacturer͛s specifications in housing, commercial and institutional setups.

Plumber, General Helper; is responsible for helping Plumber (General) by carrying and handling of tools and materials required in installation, minor repair and maintenance of plumbing systems.

Plumber, General Assistant; is responsible for assistance in, preliminary installation and minor repair work of basic plumbing systems in domestic, commercial and institutional setups.

Plumber, Maintenance and Servicing Assistant; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Plumber, Maintenance and Servicing; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.

Pipe Layer/Plumber Pipeline; Sewer Pipe Layer lays concrete, stone ware or clay pipes to form sanitary drains and sewers. Receives instructions regarding size and type of concrete, stone ware or clay pipe to be laid. Digs or gets earth dug along marked lines using spade, picks etc. to make trenches for laying pipes. Levels and smoothens bottom of trenches to proper gradient by scooping with shovels. Receives pipes of required size lowered into trench manually or by pulley and adjusts their position by hand or crow-bar for correct levelling and vertical and horizontal alignment. Joints pipes together using appropriate couplings, joints, rings etc. and closes joints by caulking with fibre and cement to prevent leakage. Tests joints by hydraulic or pneumatic pressure after sealing. Fills trench with earth to cover laid pipe and rams earth to avoid sinking. Is designated as PIPE LAYER WATERMAINS or WATER MAINS FITTER if engaged in laying cast iron or galvanized iron water pipe mains and in caulking their joints with lead to prevent leakage. May lay pipe lines to provide water connection to houses, sanitary sewers etc. May fix meters to stopcocks, remove defects from pipe lines and replace defective ones.

Pipe Fitter; lays, repairs and maintains, pipes for supply of water, gas, oil or steam in buildings, gardens, workshops, stores, ships etc., according to drawings or instructions. Examines drawings and other specifications or receives relevant instructions. Cuts passage holes for laying pipes in walls and floors. Cuts reams, threads and bends pipes according to specifications. Lays pipes in cut passage and assembles pipe sections with couplings, sockets, Tee's elbows etc. Levels position of pipes using sprit level for gravitational flow. Caulks joints, tests them for leakage with pneumatic or hydraulic pressure and secures pipe line to structure with clamps, brackets, and hangers. Fits water meters, taps etc. to pipe where necessary. Repairs and replaces leaky pipe lines, taps and joints and provides connections to overhead water tanks. Helps Plumber, General in fittings sanitary fittings to buildings. May join pipe sections and fittings.

Plumbers and Pipe Fitters, Other; perform number of routine and low skilled tasks such as assisting in laying pipes, making water tight joints, fitting sockets and reducers, threading pipes with taps and dies, removing leakages, etc., and are designated as Plumber Mate or Pipe Fitter Helper according to type of work done.

Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant; is responsible for welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Welder) Assistant; is responsible for assistance in welding activities related to plumbing works in housing, commercial and institutional setups.

Plumber (Pumps and E/M Mechanic); is responsible for installation and repair of Pumps and E/M equipment used for different plumbing applications of housing, commercial and institutional Set ups.

Sewing Technology

Sewing Technology
Trades Duration: 
One year
Trade Type: 
Non Engineering

ITI trade Sewing Technology is powered by NCVT.  ITI trade Sewing Technology  is a job oriented trade ITI trade Sewing Technology is suitable for government job and private job. This ITI trade Sewing Technology is very powerful for self-empowerment. This ITI trade Sewing Technology is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Sewing Technology’ constructs Sari Petticoat, Ladies’ Top/Short Kurthies, Ladies’ Suit, Nightwear (One Piece with Yoke), Nightwear (Two Piece – Night suit), Sari Blouse (Simple Model - Plain), Dress for a Newborn (Jhabla), Dress for a Toddler (Sun Suit), Dress for Kids (Frock), Dress for Kids (Frock), Gent’s, Casual Shirt, and Gent’s Trousers, according the sketched designs. The trainee also practices, maintains and troubleshoots basic sewing machines and over-lock machines. The course is meant for a trainee who aspires to become a Sewing Machine operator, Assistant to Designer, Assistant worker in Boutique, Assistant to Sample Garment Designer and Assistant to Garment Sample Coordinator 

The qualification gives access to jobs such as Sewing Machine operator, Assistant to Designer, Assistant worker in Boutique, Assistant to Sample Garment Designer and Assistant to Garment Sample  Coordinator
 

Stenographer & Secretarial Assistant (English)

Stenographer & Secretarial Assistant
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed
Trade Type: 
Non Engineering

ITI trade Stenographer & Secretarial Assistant (English) is powered by NCVT.  ITI trade Stenographer & Secretarial Assistant (English)  is a job oriented trade ITI trade Stenographer & Secretarial Assistant (English) is suitable for government job and private job. This ITI trade Stenographer & Secretarial Assistant (English) is very powerful for self-empowerment. This ITI trade Stenographer & Secretarial Assistant (English) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Stenographer Secretarial Assistant (English) trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while the core area (Employability Skill) imparts requisite core skills, knowledge, and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the senior 
Stenographer Secretarial Assistant (English)
has a wide scope of Employability ranging from self-employment, contractual employment. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Private Secretary
  • Personal Secretary
  • Secretaries, Other

JOB ROLE

Stenographer Secretarial Assistant (English) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the boss. Following are the job roles for a Stenographer Secretarial Assistant (English):

  • Correspond through emails, phone and faxes
  • Maintaining and updating filing systems
  • Coordinating with department heads to ensure smooth working of the organization
  • Handling day-to-day administrative duties of the organization
  • Making arrangement for meetings, conference and seminars
  • Handling various activities within and outside the organization
  • Taking dictation in shorthand and operating typewriter for transcribing dictated materials
  • Handled and maintained correspondence files and other official documents
  • Made travel bookings for domestic and international services
  • Drafted business letters in clear and precise manner for easy understanding
  • Coordinated business meetings and wrote minutes of meetings in shorthand
  • Handled confidential information of the organization
  • Prepared reports and documents for inter-department
  • Handled day-to-day activities of the organization
  • Prepared various presentations for the management team 

Stenographer & Secretarial Assistant (Hindi)

Stenographer & Secretarial Assistant (Hindi)
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed
Trade Type: 
Non Engineering

ITI trade Stenographer & Secretarial Assistant (Hindi) is powered by NCVT.  ITI trade Stenographer & Secretarial Assistant (Hindi)  is a job oriented trade ITI trade Stenographer & Secretarial Assistant (Hindi) is suitable for government job and private job. This ITI trade Stenographer & Secretarial Assistant (Hindi) is very powerful for self-empowerment. This ITI trade Stenographer & Secretarial Assistant (Hindi) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

‘Stenographer Secretarial Assistant (Hindi)’ trade under CTS is delivered nationwide through a network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional skills and knowledge, while the Core area (Employability Skill) imparts requisite core skills, knowledge, and life skills. After passing out the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Stenographer Secretarial Assistant (Hindi) takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. He/she drafts business letters in clear and precise manner for easy understanding; prepares reports and documents for inter-department. 
Stenographer Secretarial Assistant (Hindi) has a wide scope of Employability ranging from self-employment, contractual employment. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

  • Secretary/Back Office Support 
  • Private Secretary 
  • Personal Secretary 
  • Secretaries, Other

JOB ROLE

Stenographer Secretarial Assistant (Hindi); takes dictation in shorthand and reproduces it on paper using computer and performs various other clerical duties to assist superiors. Maintain a good mannerism and professional approach with the boss.

Private Secretary-cum-Stenographer; Personal Assistant takes dictation in shorthand and reproduces it on paper using typewriter and performs various other clerical duties to assist superiors. Takes dictations in shorthand and transcribes them using typewriter. Receives and opens mail and submits it to superiors for information and further action. Maintains diary to note time, date and place of meetings and other engagements for employer or superior. Reminds employer or superior of engagements and accompanies him if required. Attends to routine enquiries in person, writing or over phone. Receives visitors and arranges their interviews with superior. Keeps important and confidential records. May attend to routine correspondence on behalf of employer.

Personal Secretary; performs routine clerical and administrative functions such as drafting correspondence, scheduling appointments, organizing and maintaining paper and electronic files, or providing information to callers. Operates office equipment such as fax machines, copiers, and phone systems, and use computers for spreadsheet, word processing, database management, and other applications. Answers telephones and give information to callers, take messages, or transfer calls to appropriate individuals. Greets visitors and callers, handle their inquiries, and direct them to the appropriate persons according to their needs. Sets up and maintains paper and electronic filing systems for records, correspondence, and other material. Locates and attaches appropriate files to incoming correspondence requiring replies. Opens, reads, routes, and distributes incoming mail and other material, and prepares answers to routine letters. Completes forms in accordance with company procedures

Secretaries, Other; include secretaries who use typewriters or word-processing equipment to check and transcribe correspondence and other documents, deal with incoming and outgoing mail, and deal with routine correspondence on their own initiative not elsewhere classified.

Secretary/Back Office Support; Stenographers; Steno-typist records dictations in shorthand and transcribe them in typewritten form. Takes dictation in shorthand. Transcribe dictated material from note book, using typewriter. Compares typed matter and submits them to superiors. May cut stencil on typewriter for use on duplicating machine.

Surface Ornamentation Techniques (Embroidery)

Surface Ornamentation Techniques (Embroidery)
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed
Trade Type: 
Non Engineering

ITI trade Surface Ornamentation Techniques (Embroidery) is powered by NCVT.  ITI trade Surface Ornamentation Techniques (Embroidery)  is a job oriented trade ITI trade Surface Ornamentation Techniques (Embroidery) is suitable for government job and private job. This ITI trade Surface Ornamentation Techniques (Embroidery) is very powerful for self-empowerment. This ITI trade Surface Ornamentation Techniques (Embroidery) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

A trainee of the course ‘Surface Ornamentation Techniques (Embroidary)’ carries out typical embroidery works such as Drawn and Pulled Thread, Assisi, Cut, Swiss, and Shadow, and traditional embroidery works such as Phulkari, Kantha, Kasuti, Chikankari, Kashida, Chamba, and Kutch. The trainee also prepares fancy nets such as Cane weaving, Fancy net with Lazy Daisy, Fancy net with Cross Stitch, Fancy net with Circles, and Button hole net and carries out Appliqué work such as Simple Appliqué, Cut Appliqué, and Felt Appliqué. The course is meant for the candidates who aspire to become Tracing experts, Hand Embroider, Zig-Zag Machine Operator, Aari Embroider, Motif Maker, Entrepreneur & Design Coordinate to Fashion Designer 

The qualification gives access to jobs such as Tracing experts, Hand Embroider, Zig-Zag Machine Operator, Aari Embroider, Motif Maker, Entrepreneur & Design Coordinate to Fashion Designer

JOB ROLES

This course is meant for the candidates who aspire to become Tracing experts, Hand Embroider, ZigZag Machine Operator, Aari Embroider, Motif Maker, Entrepreneur & Design Coordinate to Fashion Designer.

Turner

ITI trade Turner
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System with Science & Maths
Trade Type: 
Engineering

ITI trade Turner is powered by NCVT.  ITI trade Turner  is a job oriented trade ITI trade Turner is suitable for government job and private job. This ITI trade Turner is very powerful for self-empowerment. This ITI trade Turner is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion the passed out trainee

  • 1.  Can work in the industry as skilled turner.
  • 2. Can work in the field of basic fitting, lathe, drilling, Inspection & measurement observing safety precautions.
  • 3.  Can perform all the turning operations on lathe & perform simple programming & operations on a CNC lathe.
  • 4. Can handle different type of Fire extinguishers & personal protective equipment.

Welder

ITI trade Welder
Trades Duration: 
One year
Minimum Qualification Eligibility: 
10th Passed under 10+2 System
Trade Type: 
Engineering

ITI trade Welder is powered by NCVT.  ITI trade Welder  is a job oriented trade ITI trade Welder is suitable for government job and private job. This ITI trade Welder is very powerful for self-empowerment. This ITI trade Welder is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Gas welding (includes gas cutting), Arc welding, TIG welding, MIG/MAG welding etc

Wireman

ITI trade Wireman
Trades Duration: 
Two Year
Minimum Qualification Eligibility: 
8th Passed
Trade Type: 
Engineering

ITI trade Wireman is powered by NCVT.  ITI trade Wireman  is a job oriented trade ITI trade Wireman is suitable for government job and private job. This ITI trade Wireman is very powerful for self-empowerment. This ITI trade Wireman is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Wireman, Light and Power installs various kinds of electrical wiring such as cleat, conduit, casing, concealed etc. in houses, factories, workshops and other establishments for light and power supply. Studies diagram and plan of wiring and marks light, power and other points accordingly. Fixes wooden pegs, sizes tubes, saws casings, etc. by common carpentry fitting and other processes, according to type of wiring needed. Erects switch boards and fixes switch box casings cleats, conduits ceiling roses, switches, meters etc. according to type and plan of wiring. Draws wire in two way or three-way wiring system as prescribed and makes electrical connections through plugs and switches to different points exercising great care for safety and avoiding short circuit and earthing at any stage of wiring. Fixes fuses and covers as per diagram and insulates all naked wires at diversions and junctions to eliminate chances of short circuit and earthing. Fits light brackets, holders, shades, tube and mercury lights, fans etc, and makes electrical connection as necessary. Tests checks installed wiring for leakage and continuity using megger, removes faults if any and certifies wiring as correct for connecting mains. Checks existing wiring for defects and restores current supply by replacing defective switches, plug sockets, blown fuse etc. or removing short circuits and faulty wiring as necessary. May repair simple electrical domestic appliances. 

Electrical wiring works such as cleat, conduit, casing, concealed etc. in houses, factories, workshops and other establishments for light and power supply.

Map: 

ITI Student Resume Portal

रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं

ITI Student Resume

ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं

 

Search engine adsence