Govt Industrial Training Institute Malerkotla
Govt Industrial Training Institute Malerkotla is situated in Sangrur Punjab. Govt Industrial Training Institute Malerkotla is Industrial Training Institute under NCVT Govt Industrial Training Institute Malerkotla. Location of Govt Industrial Training Institute Malerkotla is Nabha Road Maler kotla Sangrur Punjab.
Government ITI
Government ITI is leading educational organisatin in india. Teching facualty of Government ITI is suprimo. ITI is providing latest Job oriened cource for student. This Government ITI is powerd by 'Ministry of Skill Development and Entrepreneurship, Government of India for Craftsmen Training Scheme .
Punjab
The Department of Technical Education & Industrial Training was created on 10.06.1977 in its present form after detaching the Technical Education Wing from the Department of Punjab, P.W.D. (B&R) and detaching the Industrial Training Wing from the Department of industries thereby bringing both the wings under one umbrella though each of these two wings are more than 50 years old.
The Industrial Training Wing of Department of Technical Education and Industrial Training has been entrusted with the responsibility of imparting vocational training in Engineering and non-engineering trades under craftsman training scheme & Applied training scheme to cater the need of the industry in respect of skilled workers. All the Industrial Training Institutes centre work under Craftsman Training Scheme of Government of India, Director - General Employment & Training under the directions of National Council of Vocational Training which is the apex body at Government of India level for coordinating development of Vocational Training in the country. Similar to the National Council for Vocational Training at Central level, State Council for Vocational Training the State level is responsible for coordinating an integrated development of Vocational Training
Reff: https://itipunjab.nic.in/genregsys/Candidate/Default.aspx
Carpenter
ITI trade Carpenter is powered by NCVT. ITI trade Carpenter is a job oriented trade ITI trade Carpenter is suitable for government job and private job. This ITI trade Carpenter is very powerful for self-empowerment. This ITI trade Carpenter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Carpenter has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:
- Carpenter
- Carpenter Construction
Electrician
ITI trade Electrician is powered by NCVT. ITI trade Electrician is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
- Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.
- After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board.
- They can set up their own Rewinding and servicing of Domestic Equipment shop.
- Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various Industries etc
- They can also go for further higher studies after successful completion of course.
- Students who have completed this course have found employment in the following areas:
- Service/Maintenance Technician for domestic appliances in Reputed Companies
- Winder of Electrical Motors in winding shop
- Contractor for domestic wiring and industrial wiring
- Armature winder of Electrical fans and motors
- Electrical appliance repair in electrical shops
- Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
- Local Electricity Board
- Assembler of Electrical control Gears
- Telephone Department
- Installation and Testing division of Auditorium and Cinema Hall
- Factories
- As Instructor in Govt./Private ITI/ITC
- Merchant Navy
- Indian Air Force
- Self-Employment in Service Centre
Electronics Mechanic
ITI trade Electronics Mechanic is powered by NCVT. ITI trade Electronics Mechanic is a job oriented trade ITI trade Electronics Mechanic is suitable for government job and private job. This ITI trade Electronics Mechanic is very powerful for self-empowerment. This ITI trade Electronics Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Brief description of job roles:
Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.
Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.
Electronics Mechanic; Electronic Equipment Mechanic repairs electronic equipment, such as computers, industrial controls, transmitters, and telemetering control systems following blueprints and manufacturer's specifications and using hand tools and test instruments. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.
Radio Technician (Radio Manufacturing) tests assembled radio sets with testing equipment to ensure that assembly soldering, frequency, performance, etc. are in accordance with prescribed standards. Places assembled radio set in position and visually examines it to ensure that position of components, connections, soldering, wiring, etc. are in order. Switches on and operates different knobs to check calibration, audibility and general performance of set by varying its tone and listening to various stations and frequencies. Tightens loose nuts and screws, locates faults, replaces defective components and conducts necessary changes. Approves correctly assembled sets for further processing and rejects defective ones for rectification. May tests sets at different stages of assembly. May service, repair and overhaul radio sets.
Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work checks the installation site, understands the layout requirement as per design, assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.
Optical fibre technician is responsible for maintaining uptime and quality of the network segment (both optical media and equipment) assigned to him by undertaking periodic preventive maintenance activities and ensuring effective fault management in case of fault occurrence. He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF) as per the route plan.
Field Technician: UPS and Inverter is also called, ‘UPS repair Technician’, this is an after sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual also and interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.
Television Installation Man installs and adjusts television receivers and antennas, using hand tools. Selects antenna according to type of set and location of transmitting station. Bolts cross arms and dipole elements in position to assemble antenna. Secures antenna in place with bracket and guy wires, observing insurance codes and local ordinances to protect installation from lighting and other hazards. Drills and waterproofs holes in building to make passage for transmission line. Connects line between receiver and antenna and fastens it in place. Tunes receiver on all channels and adjusts screws to obtain desired density, linearity, focus and size of picture. Orients antenna and installs reflector to obtain strongest possible reception.
Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole, using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools, test equipment.
Television Service and Repairman repairs and adjusts radios and television receivers, using hand tools and electronic testing instruments. Tunes receiver on all channels and observes audio and video characteristics to locate source of trouble. Adjusts controls to obtain desired density, linearity, focus and size of picture. Examines chassis for defects. Tests voltages and resistance of circuits to isolate defect following schematic diagram and using voltmeter, oscilloscope, signal generator and other electronic testing instruments. Tests and changes tubes, solders loose connections and repairs or replaces defective parts, using hand tools and soldering iron. Repair radios and other audio equipment.
Television Repair Technician job role is applicable to both Television manufacturing facilities as well as electronics service centres. This role pertains to rectify faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.
Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.
Fitter
ITI trade Fitter is powered by NCVT. ITI trade Fitter is a job oriented trade ITI trade Fitter is suitable for government job and private job. This ITI trade Fitter is very powerful for self-empowerment. This ITI trade Fitter is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Fitters have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the following industries:
- Production & Manufacturing industries.
- Structural Fabrication like bridges, Roof structures, Building & construction.
- Automobile and allied industries
- Service industries like road transportation and Railways.
- Ship building and repair
- Infrastructure and defence organizations
- In public sector industries like BHEL, BEML, NTPC, etc and private industries in India & abroad.
- Self employment
International Comparability
- Existence of any official document suggesting the comparability of the qualification with the qualifications in other countries is not known.
- However, ITI passed out trainees are getting employment in many Gulf countries, European countries, Australia, New Zealand, Singapore etc.
Progression Pathway
- Can appear in 10+2 examination through National Institute of Open Schooling (NIOS) for acquiring higher secondary certificate and can go further for General/ Technical education
- Can take admission in diploma course in notified branches of Engineering by lateral entry
- Can join as semi-skilled worker in the industry and can become supervisor after doing part-time diploma in relevant branch of Engineering
- Can join Apprenticeship programme in different types of industries leading to National Apprenticeship certificate (NAC) after which they will be employed in industry as skilled worker and can become supervisor after doing part-time diploma in relevant branch of Engineering
- Can join Crafts Instructor Training Scheme (CITS) in the relevant trade after which they will be employed in ITI/ Vocational Training Institute as instructor
Plumber
ITI trade Plumber is powered by NCVT. ITI trade Plumber is a job oriented trade ITI trade Plumber is suitable for government job and private job. This ITI trade Plumber is very powerful for self-empowerment. This ITI trade Plumber is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
Plumber trade under CTS is one of the popular courses delivered nationwide through network of ITIs. The course is of one year (02 semester) duration. It mainly consists of Domain area and Core area. In the Domain area (Trade Theory & Practical) impart professional - skills and knowledge, while Core area (Workshop Calculation science, Engineering Drawing and Employability Skills) imparts requisite core skills, knowledge and life skills. After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.
Plumber assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Responsible for installation, operation and repair of plumbing system used in housing, commercial and institutional setups, drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc., maintenance and servicing of pipes and sanitary fixtures.
Plumber has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:
- Plumber, General
- Plumber, Operations
- Plumber, General-Installation and Repair
- Plumber, General Helper
- Plumber, General Assistant
- Plumber, Maintenance and Servicing Assistant
- Plumber, Maintenance and Servicing
- Pipe Layer/Plumber Pipeline
- Pipe Fitter
- Plumbers and Pipe Fitters, Other
- Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant
- Plumber (Welder) Assistant
- Plumber (Pumps and E/M Mechanic)
JOB ROLE
Plumber, General; lays out, assembles, installs and maintains sanitary fittings and fixtures, sewage and drainage systems, heating and sanitary systems, gas and water pipe lines etc. Receives instructions from Sanitary Engineer or Civil Engineer regarding lay out of pipes, gas or water mains, position of fixtures and fittings, etc. Examines drawings or other specifications regarding size and dimensions of area where sanitary fittings or pipe are to be fitted or laid. Marks points at places to indicate position for fixing brackets and laying pipes. Drills passage holes in walls or floor of premises and fixes necessary brackets, stands, holders etc. to keep or hold fittings and fixtures in position, using nuts, bolts, clamps etc. and tightens them with hand tools. Cuts reams, threads and bends pipes as appropriate. Ensures that pipe lines are laid properly by Pipe Fitter. Joins pipes with sockets, Tees, elbow etc. or with molten lead or lead wool. Caulks joints (operation of making joint seam tight to withstand pressure) and tests them for leaks with pneumatic or hydraulic pressure. May repair and maintain sewerage and pipe lines by replacing washers on leaky faucets, mending burst pipes, opening clogged drains, etc. May do lead burning, dressing and bossing of lead pipe and sheet lead, inlaying of wooden tanks, construction of septic tanks etc
Plumber, Operations; is responsible for operation of plumbing system used in housing, commercial and institutional setups.
Plumber, General-Installation and Repair; Plumber (General)-II is responsible for installation and repair plumbing systems including those of advanced sanitary fixtures as per manufacturer͛s specifications in housing, commercial and institutional setups.
Plumber, General Helper; is responsible for helping Plumber (General) by carrying and handling of tools and materials required in installation, minor repair and maintenance of plumbing systems.
Plumber, General Assistant; is responsible for assistance in, preliminary installation and minor repair work of basic plumbing systems in domestic, commercial and institutional setups.
Plumber, Maintenance and Servicing Assistant; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.
Plumber, Maintenance and Servicing; is responsible for assistance in maintenance and servicing of pipes and sanitary fixtures in housing, commercial and institutional setups.
Pipe Layer/Plumber Pipeline; Sewer Pipe Layer lays concrete, stone ware or clay pipes to form sanitary drains and sewers. Receives instructions regarding size and type of concrete, stone ware or clay pipe to be laid. Digs or gets earth dug along marked lines using spade, picks etc. to make trenches for laying pipes. Levels and smoothens bottom of trenches to proper gradient by scooping with shovels. Receives pipes of required size lowered into trench manually or by pulley and adjusts their position by hand or crow-bar for correct levelling and vertical and horizontal alignment. Joints pipes together using appropriate couplings, joints, rings etc. and closes joints by caulking with fibre and cement to prevent leakage. Tests joints by hydraulic or pneumatic pressure after sealing. Fills trench with earth to cover laid pipe and rams earth to avoid sinking. Is designated as PIPE LAYER WATERMAINS or WATER MAINS FITTER if engaged in laying cast iron or galvanized iron water pipe mains and in caulking their joints with lead to prevent leakage. May lay pipe lines to provide water connection to houses, sanitary sewers etc. May fix meters to stopcocks, remove defects from pipe lines and replace defective ones.
Pipe Fitter; lays, repairs and maintains, pipes for supply of water, gas, oil or steam in buildings, gardens, workshops, stores, ships etc., according to drawings or instructions. Examines drawings and other specifications or receives relevant instructions. Cuts passage holes for laying pipes in walls and floors. Cuts reams, threads and bends pipes according to specifications. Lays pipes in cut passage and assembles pipe sections with couplings, sockets, Tee's elbows etc. Levels position of pipes using sprit level for gravitational flow. Caulks joints, tests them for leakage with pneumatic or hydraulic pressure and secures pipe line to structure with clamps, brackets, and hangers. Fits water meters, taps etc. to pipe where necessary. Repairs and replaces leaky pipe lines, taps and joints and provides connections to overhead water tanks. Helps Plumber, General in fittings sanitary fittings to buildings. May join pipe sections and fittings.
Plumbers and Pipe Fitters, Other; perform number of routine and low skilled tasks such as assisting in laying pipes, making water tight joints, fitting sockets and reducers, threading pipes with taps and dies, removing leakages, etc., and are designated as Plumber Mate or Pipe Fitter Helper according to type of work done.
Plumber (Welder)/Plumbing (Sanitary Fixtures) Fitter Assistant; is responsible for welding activities related to plumbing works in housing, commercial and institutional setups.
Plumber (Welder) Assistant; is responsible for assistance in welding activities related to plumbing works in housing, commercial and institutional setups.
Plumber (Pumps and E/M Mechanic); is responsible for installation and repair of Pumps and E/M equipment used for different plumbing applications of housing, commercial and institutional Set ups.
Textile Wet Processing Technician
During the two-year duration of Textile Wet Processing Technician trade, a candidate is trained on Professional Skill, Professional Knowledge, Engineering Drawing, Workshop Calculation & Science and Employability Skill related to job role. In addition to this, a candidate is entrusted to undertake project work and extracurricular activities to build up confidence. The broad components covered under Professional Skill subject are as below:-
FIRST YEAR – During this year the candidates will acquire the skill on identifying various types of hand tools, observe the safety precautions during filing, marking, punching and drilling practices. He will be aware of various types’of gauges, types of lathes and its functions. Turning tool, grinding tool setting and job setting, facing and chamfering, plain turning etc. He will also develop skill on various types of welding and welding process. He will apply range of skill to execute different carpentry work. He will also identify different electrical and electronic measuring instruments and test electrical assembly. The candidates will be familiar with institution, observe the safety precaution during performing various jobs. They will recognize different raw materials, properties and machinery equipment used in the trade. Trainees will develop analytical skills related to the testing of water quality and efficiency of wetting agent. Identify various types of fibres and various lubricants used for different parts of the machineries, machineries used for finishing of various functional processes and maintenance of general observation. They will also develop skill on various chemical preparatory processes carried out for yarn and grey cloth. Wash and dry different textiles and machineries used for washing and drying processes. Trainees will be able to recognize damages after preparatory process using various methods of detection and prevention. They will also develop skill on starching of fabric, chemical softening biochemical/enzyme assisted processes carried for textile fabrics.
SECOND YEAR – In this year the trainees will run a model effluent treatment plant with chemical dosing, filtration and aerations with situation of clear choice& calculations of steam energy. They will Plan and execute the operation of boiler. They will also identify, select the dyeing process and troubleshoot various machineries involved. The trainees will Select and organize the dyeing process of wool, silk, flax and jute with suitable dyes using appropriate machines with situation of clear choice. They will Plan and execute the working method of screen printing machines. They will be also able to Troubleshoot and maintain the electronic controller used in dyeing and printing machine using appropriate rules & tools.
ITI Student Resume Portal
रिज्यूम पोर्टल का मुख्य उद्देश्य योग्य छात्रों की जानकारी सार्वजनिक पटल पर लाने की है जिससे जिन्हें आवश्यकता हो वह अपने सुविधा अनुसार छात्रों का चयन कर सकते हैं
ITI Student Resume
ITI सिलेबस की पीडीएफ फाइल डाउनलोड कर सकते हैं
