1.    Demonstrate first aid, fire safety equipment, different types of fire extinguisher and     their     application. (10hrs.) 
2.    Identification of different wooden sample piece i.e. - soft wood & hard wood, wooden grains etc. & their applications. (04hrs.) 
3.    Identification of wooden sample piece (Annual ring, knots, shakes & chicks etc.). (03hrs.)  
4.    Demonstrate use of hand operated tools and showing different audio-visual clips.(08 hrs.)  
5.    Identification and use of different types of the measuring, marking and testing tools & their applications. (10hrs.) 
6.    Identification and use of different types of work holding devices. (06hrs.) 
7.    Demonstrate use of machinery and hand operated portable tools and their safety. (09 hrs.)  
8.     Demonstrate the use of bench vice, bench hook, bench stop& their application. (02 hrs.)  
9.    Demonstrate different types of saws- ripping, cross cutting, curve cutting, oblique sawing. (06 hrs.)  
10.    Use and practice Portable power circular saw. (04hrs.)  
11.    Sharpen and set different type saw blade. (05 hrs.)  
12.    Demonstrate the use of country drill, hand drill, ratchet brace, Breast drill and hand augers & bits.(04hrs.)  
13.    Demonstrate the use of portable electrical drill machine. (02hrs.) 
14.    Demonstrate the Auger application. (02hrs.) 
15.    Planning face, face edge. (04 hrs.) 
16.    Demonstrate the use of marking, mortise gauge etc. (04 hrs.)  
17.    Test the accuracy of flatness and twistness of the surface by using try square. (04hrs.) 
18.    Demonstrate the use of winding strips, cross planning, edge planning.(04hrs.) 
19.    Grinding and Sharpening process of the planer blade/ cutter. (05 hrs.) 
20.    Demonstration of portable power planer machine and its function. (04 hrs.) 
21.    Demonstrate the use of different types of chisel, chiselling, chiselling along& across the grain.  (08hrs.) 
22.    Grind/ sharpen and honing of a chisel. (08hrs.) 
23.    Demonstrate use of different types of striking tool, hammer and mallets. (04hrs.) 
24.    Demonstrate the use of clamps ‘G’ or ‘C’, saw sharpening vice, carpentry vice etc. (05hrs.)
    
Demonstration and making framing joint 

25.    Single Mortise and tenon Joint. (04hrs.)  
26.    Double tenon & mortise joint. (04hrs.) 
27.    Plain hunched tenon and mortise joint. (04 hrs.)  
28.    Mitre     corner     tenon & mortise joint. (04hrs.) 
29.    Task tenon mortise joint. (04 hrs.) 
30.    Bare     faced     tenon     joint. (05hrs.) 
    
Demonstration and making Housing joints 

31.    Full housing joint. (03 hrs.)  
32.    Bridle joint etc. (03hrs.) 
33.    Stopped housing joint. (04 hrs.) 
34.    Dovetail housing joint. (03 hrs.)

Demonstration and  making dovetail joint 
35.    Single dovetail joint. (03hrs.)  
36.    Common dovetail joint. (03 hrs.) 
37.    Lapped dovetail joint. (03 hrs.)  
38.    Secret mitre dovetail joint uses of dovetail template. (03 hrs.) 

Demonstration and Making broadening joints  

39.    Simple butt joint by hard wood (100 mm width and 15mm thick).  (02 hrs.) 
40.    Riveted butt joint on hard wood (100mm width and 25mm thick). (04 hrs.) 
41.    Pocket screw butt joint on hard wood (100mm width and 15mm thick). (03 hrs.) 
42.    Secret pocket screw butt joint on teak wood or hard wood (100mm width and 100mm thick). (06 hrs.) 
43.    Glued butt joint with dowel by a hard wood (100mm width and 15mm thick). (04 hrs.) 
44.    Tongue and groove joint on hard wood (100mm width and 15mm thick). (06 hrs.) 

Making lengthening joint 

45.    End half lap joint on hard wood (50mm X 50mm). (02hrs.)  
46.    End over lap joint by hard wood 150mm X 25mm. (01 hr) 
47.    End bends lap joint on hard wood (50mm X25mm). (02 hrs.)  
48.    Table scrat joint on hard wood (50mm X 50m). (03 hrs.) 
49.    Too then end table & scarf joint on hard wood (50mm X 50m). (04 hrs.) 
50.    Bend scarf joint on teak wood or hard wood (50mm X 50m). (03 hrs.) 

Making of Frame using different type of joints – 

51.    Stopped Tenon & mortise Joint on hard wood to make tea table frame to lock four legs, top rail and bottom rails. (04 hrs.) 
52.    Lapped half lap dovetail joint on bottom rails on hard wood. (03 hrs.) 
53.    Tongue & Groove joint on tabletop by hard wood as a broadening joint. (03 hrs.) 

Make small wall bracket –  

54.    Make joint on hard wood to make small frame. (03hrs.)  
55.    Stopped Tenon & Mortise joint on hard wood in the frame to set the selves. (02hrs.) 
56.    Make selves by six pieces of hard wood with single lapped half lap dovetail joint with frame (two nos. of selves). (05 hrs.) 
57.    Four sides of chalk box. (100mm X 120mm X 100mm) locked with hard wood by common dovetail joint (3 pin). (05 hrs.) 
58.    Grooves on three sides. (02 hrs.) 
59.    Make the lid & base with Masonite with     handle levelled with top. (02 hrs.) 
60.    Common dovetail joint apply to lock four sides of tray (400mm X 300mm     X 200mm). (04 hrs.) 
61.    Bases made with ply wood (5mm thick) and make the handle.  (02 hrs.)
62.    Layout of stool and make cutting     List     for     mass production. (05hrs.) 
63.    Prepare standard height tapper legged stool as per layout. (05hrs.) 
64.    Demonstrate application of adhesive. (05 hrs.) 
65.    Layout making for notice board or display board by hard board, plywood and insulation board. (05 hrs.)  
66.    Making a small rack by layout with hard wood and plywood. (05 hrs.)

67.    Make Frame structure with the block board, layout as per the size and cutting by portable circular saw machine with Common dovetail joint used in the structure. (12 hrs.) 
68.    Painting and polishing or fixing sun mica with adhesive. (08 hrs.)  
69.     Setting glasses and hard works as on required location. (05 hrs.)   
70.    Make a small table use of lock, hinges, hasp and staple etc. making a small box with sun mica top. (Mortise and tenon joint. ‘T’ half tap dovetail joint. Secret dovetail joint).  (20 hrs.) 
71.    Uses sun mica and pest on the top of table. (05 hrs.) 
    
Demonstration on nailing screwing on job  
72.    Use selected nail for the table and small box. (12 hrs.) 
73.    Use selected screw for the table and small box. (08 hrs.) 
74.    Application of different types of Nails, screws etc. (05 hrs.) 
75.     Demonstrate wood carving using carving tools, sharpen carving tools and finish by smoothing. (25 hrs.) 
76.    Prepare surface for Painting. (04 hrs.) 
77.    Apply paints.  (03 hrs.)
 
Varnish surface of woodwork 

78.    Prepare surface for varnishing     by smoothing plane. (04 hrs.) 
79.    Smoothing plane on knotty and     interlocked cross grained. (04 hrs.) 
80.    Smoothen surface by scraping with sandpaper or portable sander machine.(06 hrs.) 
81.    Varnish on finished surface.(04 hrs.) 

Polishing of Furniture –  
82.    Cleaning of furniture surface. (04hrs.) 
83.    Application of French polish. (06hrs.) 
84.    Application of wax polishes. (06hrs.) 
85.    Remove old polish and re-polish old furniture. (05hrs.) 
86.    Prepare an estimation of wooden furniture. (04hrs.) 
87.    Demonstrate     band     saw machine with different parts & their functions. (07 hrs.)  
88.    Demonstration to the safety precaution with operational techniques. (07 hrs.)  
89.    Remove and refit band saw blades. (03 hrs.) 
90.    Grinding and setting operation     of band saw blade. (08 hrs.)  
91.    Ripping & cross cutting operation on band saw machine with hard wood.(07 hrs.) 
92.    Curve cutting operation on hard board or soft wood or ply board by band saw machine. (08 hrs.) 
93.    Bevelling operation on hard wood/ soft wood. (05 hrs.) 
94.    Chamfering operation on hard wood/ soft wood/ ply board by bend saw machine.(05 hrs.) 
95.    Demonstrate circular saw machine, its parts and their operational techniques with safety precaution. (04 hrs.) 
96.    Remove and refit of circular saw blade. (02 hrs.) 
97.    Grinding and setting operation of the circular saw blade. (04 hrs.) 
98.    Ripping & cross cutting operation on hard wood/ soft wood/ ply wood (not less than 12 mm) by circular saw machine. (04hrs.) 
99.    Rebating & grooving operation on hard wood/ soft wood by circular saw machine. (04 hrs.)  
100.    Mitering operation on hard wood/ soft wood/ plywood (not less than 12 mm) (02 hrs.)  
101.    Demonstrate portable Circular saw machine with different parts & their functions. (04 hrs.)  
102.    Remove and refit of saw blade. (01 hr.) 
103.     Demonstrate Jointer/surface Planer machine, its parts and their operational techniques and safety precaution. (06 hrs.)
104.    Remove and refit of cutter of planning machine. (04 hrs.) 
105.    Sharpening and honing operation of cutter of planning machine. (15 hrs.) 
106.    Surfacing operation on hard wood/soft wood by planning machine. (06hrs.) 
107.    Thickness operation on hard wood/soft wood by planning machine. (06hrs.) 
108.    Chamfering Operation (06hrs.) 
109.    Edge bending operation on hard wood/ soft wood by planning machine. (07hrs.) 
110.    Demonstrate pedestal grinding machine, its parts and their operational techniques with safety precautions. (06hrs.) 
111.    Demonstrate off hand grinding operation as per requirement of the trade.(07 hrs.)  
112.    Grind mushroom head, cutting edge of tools, drill bits and check correctness.(12 hrs.)   
113.    Demonstrate pedestal drilling machine and its parts & their operational techniques and safety precaution. (06 hrs.) 
114.    Make different sizes of drill hole on wooden block/ job using straight/ taper shank drill bit. (10 hrs.) 
115.    Use of counter sinking bit on job. (07 hrs.) 
116.    Demonstrate care & maintenance.  (02 hrs.) 
117.    Demonstrate wood turning lathe, its parts & chisels sets with operational technique and safety precaution. (04 hrs.) 
118.    Remove, grind and refit cutting tools and set job. (04 hrs.) 
119.    Plain turning operation on hard wood/ soft wood by wood turning lathe. (04 hrs.) 
120.    Drilling, boring, taper turning operation on hard wood/ soft wood by wood turning lathe. (05 hrs.) 
121.    Make chisel handle, table lamp stand, etc on wood turning lathe. (05 hrs.) 
122.    Internal turning operation using face plate. (03 hrs.) 
123.    Demonstrate working of mortise machine, its part, their operational techniques and safety precaution. (06 hrs.) 
124.    Adjust table along with feed and job holding. (03 hrs.) 
125.    Mortising operation on hard wood/soft wood (300mmX50 mm X 25mm).(05 hrs.) 
126.    Remove and refit of chain & sprocket with the machine. (05 hrs.) 
127.    Make groove at the face or edge on the job. (06 hrs.) 
128.    Demonstrate working of different types Sanding machine, its part, their operational techniques and working safety precaution. (10 hrs.) 
129.    Operation on hard wood/ soft wood by using sanding machine. (15hrs.) 
130.    Identify pattern making hand tools (02 hrs.) 
131.    Use contraction rule (01hr.)  
132.    Demonstrate application of different type of pattern allowances. (05 hrs.) 
133.    Layout simple solid pattern on layout board. (03 hrs.) 
134.    Make pattern as per checked layout (take help of wood working machines as much as possible) on teak wood. (06hrs.) 
135.    Make     Layout     of split pattern. (03 hrs.) 
136.    Mark and make split pattern on teak wood. (05 hrs.) 
137.    Making     dowels     for split pattern.  (02 hrs.) 
138.    Use of dowel pin and nail and screw etc. (02 hrs.) 
139.    Make templates by sun-mica, hard wood. (04 hrs.) 
140.    Make filets. (03 hrs.) 
141.    Layout  of multi pieces pattern. (07 hrs.) 
142.    Mark and make multi piece pattern with teak wood as per layout and drawing. (07 hrs.) 
143.    Mark and make core and core print. (06 hrs.) 
144.    Prepare core box.  (06 hrs.) 
145.    Carting pattern. (05 hrs.) 
146.    Positioning of core point (03 hrs.) 
147.    Apply Colour code on pattern, core box as per IS specification. (05 hrs.) 
148.    Mark and make hanging plate, corner plate, name plate, different types of clamps and angle plate by chipping, sawing filling, drilling, counter sinking etc. (14 hrs.) 
149.    Make nuts, bolts, washers, screws by drilling, taping and dieing.  (06hrs.) 
150.    Grind chisels, drills and check for correct cutting angle. (05hrs.) 

Sheet metal work (S.M.W) 
151.    Mark, cut and make various joints. (06hrs.) 
152.    Develop and mark metal sheet to make simple square container as per drawing. (08hrs.) 
153.    Make     simple     square container with wired edge and riveted joint and check dimension of the product. (12hrs.) 
154.    Develop and mark metal sheet to make a funnel as per drawing. (10hrs.) 
155.    Make funnel as per drawing with solder joint and check dimension of the product. (14hrs.) 
156.    Revision of basic joint related with building work. (04 hrs.) 
157.    Making door shutter. (06 hrs.) 
158.    Making panel door. (06 hrs.) 159. Making door glazed shutter. (06 hrs.) 
160.     Fitting moulding with glass. (03 hrs.) 
161.    Marking and making window frame and window shutter. (06 hrs.) 
162.    Use protection bar. (05 hrs.) 
163.    Roof trusses layout. (06 hrs.) 
164.    Make Model type king post and queen post. (08 hrs.)  

Prepare sliding window & ‘Z’ battened window by aluminum channel  

165.    Angular cutting of aluminium bar at different angle and size. (06 hrs.) 
166.    Join angular aluminium bar by screw and modern adhesive like dendrite, feviquick etc. (06 hrs.)  
167.    Aluminium channel bar joining by fibre glass (06 hrs.) 
168.     Fiber glass shutter fitted with aluminium channel. (07 hrs.) 
169.     Assembling and fixing of P.V.C door for kitchen and W.C bath. (25 hrs.) 

• Cutting angular wise P.V.C door frame.  
• Forming shape by joining adhesive and screwing.  
• P.V.C shutter door finish by adhesive and screwing.  
•  Assembling & fixing the PVC door. 

170.    Removal of old painting by application of chemical paint remover. (04 hrs.) 
171.    New painting for door, window stair, furniture, etc. (04 hrs.) 
172.    Plain and smoothing of door &     window     and     staircase railing. (05 hrs.)  
173.    Apply Synthetic enamel primer on the new surface. (08 hrs.) 
174.    Apply synthetic enamel paint or oil paint on the priming surface as finishing coat. (04 hrs.) 
175.    Identification of simple floor construction.  (10hrs.) 
176.    Use the cogged joint for wooden floors. (10hrs.) 
177.    Demonstrate different type basement floor single joint wooden floor and double joint wooden floor. (10hrs.) 
178.    Make structure of wooden partition wall. (10hrs.) 
179.    Repair and recondition furniture, door and window, staircase hand railing. (10hrs.)