• Apply safe working practices.
• Select suitable chemicals (industrial, inflammable liquid) usable on the workplace
• Identify, select & execute the application of different types of extinguisher, hose & hose fittings
• Select and prepare the hydrant and pump system for proper application
• Plan and execute the concept of hydraulics in work place
• Select and categorize electrical hazard and risk & its mitigation
• Methods of using ladder in practical field
• Select the BA set and its application in appropriate place.
• Identify and use of small and special gears
• Plan and execute elementary treatment at any incidental spot
• Utilization of knots and hitches in different special job and fire
• Plan and execute to up lift various gears with proper techniques. Introduction to Hazard and Risk evaluation & the proper method of rescue & F.F
• Analyze the concept of accident caused and prevention, accident investigation, analysis and safety management
• Select & apply provisions related to safety, health and welfare in respect of Factory Act, 1948
• Assessment of available resources and their proper use
• Interpret appropriate techniques of CPR
• Identify the importance of lighting, ventilation, work related stress and its measurement.
• Plan and execute fixed fire fighting installations for their effective utilization
• Select and use PPE, its care and maintenance.
• Select Automatic Fire Detection cum Alarm System to plan their effective utilization
• Plan and execute fire station administration
• Identify communication system in different organization and their scope of use
• Accustomed with different fire situations and fire fighting using extinguishers.
• Plan and execute disaster response practices, IRS/JRT and salvage technique.
• Select and apply correct rescue method.
• Categorize building construction that can ensure fire and life safety
• Plan and execute fire protection measures based on construction and occupancy
• Plan and survey Airport & Aircraft, port and ship for rescue system and fire fighting system on it
• Identify occupational hazards associated with different dangerous chemicals, dust, gases, mist, vapours etc. to plan and execute rescue operations in these cases
• Observed safety precautions while working at height, confined place and work permit system
• Identify the characteristics of various fire suppression agents including water. Understand safety in manual and mechanical handling of materials.
• Analysis hazard evaluation and risk analysis exercise.
• Physical Training, Revision, Project work and Examination

During the one-year duration of ͞Fire Technology and Industrial Safety Management͟ trade a candidate is trained on professional skill, professional knowledge and Employability skill. In addition to this a candidate is entrusted to undertake project work, extracurricular activities and on job training to build up confidence. The broad components covered related to the trade are categorized in two semester of six months duration each. The semester wise course coverage is categorized as below:-

1 st Semester – In the first semester trainee learns about the following:-

• Chemistry of Combustion- Triangle of fire, Fire tetrahedron, classification of fire, fire behavior, stages of fire, method of fire extinguishment and some important definitions like, flash point, fire point- ignition temperature, Auto-ignition temperature, flammability Range etc.
• Discipline: - introduction, importance of discipline, General principles of discipline, essentials for discipline and outward signs.
• Fire Extinguishers; - Types of fire extinguishers, method of operation and care & maintenance.
• Hose & hose fittings: types of hose-suction hose, delivery hose, and hose reel hoes, decay and prevention method of hosed, care & maintenance. Marking & repairing of hose, standard test of suction hose, types & construction of suction hose. Types of hose fittings and its use. Branches & nozzles, adapters, breaching, couplings, hose ramps, collecting heads and other miscellaneous tools and equipment.
• Hydrant & Fittings: - types of water supply, water distribution system, types of hydrants, hydrant gears, and equipment marking, testing care & maintenance & Operation.
• Pump & Primers:- classification of pump, why centrifugal pump is suitable for firefighting- types of primers, testing , fault finding, care and maintenance and standard test.
• Foam & Foam Making equipment: - water as an extinguishant -its merits and demerits, introduction to all types of foam concentrations, properties of foams and techniques of extinguishment by foam, types of foams, characteristics of good foam, foam making equipment, mechanical. High expansion and low expansion foam storage of foam compound. Foam compatibility with Dry chemical powder.
• Extension Ladder: - types of ladders, construction features of conventional ladders, operational use, elementary knowledge of TTL. & snorkel.
• Breathing Apparatus set:-introduction of types of BA Sets in use, working principles and care and maintenance. 
• Anatomy of Fire: Definition of combustion, elements of combustion, production of combustion, heat of reaction an calorific value.
• Basic Physics:- Definition of matter and energy, physical properties of matter like density, vapour density, melting & boiling point latent heat, effects of density on behaviour of gases, basics of oxidizing and reducing agents Acids, Classification of flammable liquids, dust & explosion, liquid and gas fire, LPG.
• Small & Special gears:- Function & Construction of small gears, function & construction of -breaking in and cutting tools, Pulley blocks, function & construction-Lighting and rescue tools, operation of hydraulically operated, diesel operated and electrically operated tools, care & maintenance.
  • Hydraulics
  • Electricity
  • First Aid & Resuscitation,
  • Hazards & Risk
  • Hydrocarbon & industrial fires & fire prevention.
  • Accident Prevention
  • Safety Concept
  • Factory Act- 1948
  • Health
  • Safety
  • Welfare
  • Construction industry
  • Lighting ventilation & work related stress).

2nd Semester – In the second semester trainee learns about the following:-

• Fixed firefighting equipment
• Fire Detection & suppression systems
• Rescue Procedures
• Ropes & Lines
• Rural Fire
• Water Relay
• Salvage
• Practical fireman ship
• Ventilation
• Watch room procedure & mobilizing
• Disaster management
• Prevention, Public education and Pre-incident planning
• Personal Protective Equipment
• Means of Escape
• Aircraft Fire and Rescue
• Ship & Dock Fires
• Building Construction
• Occupational hazards & dangerous chemicals
• Working at height, confined space
• Material handling
• Housekeeping and waste disposal
• Hazardous chemicals
• Safety in Engineering industries.