ITI trade Driver Cum Mechanic is powered by NCVT.  ITI trade Driver Cum Mechanic  is a job oriented trade ITI trade Driver Cum Mechanic is suitable for government job and private job. This ITI trade Driver Cum Mechanic is very powerful for self-empowerment. This ITI trade Driver Cum Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

• Driver cum Mechanic,drivesmotor car according to owner's requirement as paid employee. Observes road signals and traffic rules.
• Driver cum Mechanic repairs to motor vehicles under guidance of Mechanic Motor vehicle (MMV). Receives instructions from Mechanic, Automobile about tasks to attend. Jacks up vehicle to  equired height for repair in convenient position where necessary.
• Lubricates joints, tightens loose parts and makes necessary adjustments
• Sets wheel alignment, adjust, steering, clutch, hand brakes, brake pedal etc fits new or repaired accessories and body parts, and performs other tasks to effect repairs
• Carryout routine Maintenance of Battery and Ignition System
• Carryout Tire Maintenance
• Identify Computer Parts and operate the computer

A trainee after attending the course on ‘Driver cum Mechanic’ shall be able to drive motor car according to owner's requirement, observe road signals and traffic rules, repair motor vehicles under guidance of a Mechanic (Motor vehicle), jack up vehicle to the required height for repair in convenient position where necessary, lubricate joints, tighten loose parts and make necessary adjustments, set wheel alignment, adjust steering, clutch, hand brakes, brake pedal etc., fit new or repaired accessories and body parts, and carry out routine maintenance of battery and ignition systems, and tire. 

• Driver cum Mechanic, drives motor car according to owner's requirement as paid employee. Observes road signals and traffic rules. 
• Driver cum Mechanic repairs to motor vehicles under guidance of Mechanic Motor vehicle (MMV). Receives instructions from Mechanic, Automobile about tasks to attend.
   

ITI trade Instrument Mechanic is powered by NCVT.  ITI trade Instrument Mechanic  is a job oriented trade ITI trade Instrument Mechanic is suitable for government job and private job. This ITI trade Instrument Mechanic is very powerful for self-empowerment. This ITI trade Instrument Mechanic is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic Precision Instrument, General; tests, repairs, overhauls and assembles various precision instruments and their parts for efficient performance. Examines instrument for defects. Dismantles components and cleans them in appropriate fluid such as petrol, kerosene etc. to find out extent of damage or wear and tear to parts. Removes minor defects of parts by grinding, filing, drilling, etc. and replaces worn out and damaged parts. Adjusts position of various parts using screwdriver, spanner etc. and assembles instrument to form complete unit. Makes simple electrical connections, solders contact points and performs other tasks as necessary. Tests performance either by visual observation or by conducting simple electrical and mechanical tests and ensures that repaired or assembled instrument conforms to prescribed efficiency. May make new components and assemble new instruments. May specialize in any particular type of instrument like mechanical, hydraulic, pneumatic, electrical, optical, orthopedic etc.

Technician Instrumentation; dismantles removes and replaces a range of instruments and faulty peripheral components down to unit and component level, setting up test equipment, troubleshooting components of instruments, calibrating them and also preparing service reports and accurately documenting parts replacement and repair.

Mechanic Precision Instrument, Mechanical; makes, alters and adjusts mechanical instruments or mechanical parts of electrical and optical instruments by accurate milling, filing, grinding, lapping and other processes. Studies drawings or samples and examines precision instrument like balance, meters, pressure gauges etc. for defects. Dismantles instrument, cleans metal components in petrol, kerosene oil or otherwise and checks them to find out extent of damage and further serviceability. Makes new parts on lathe milling or other machines, if necessary. Sizes and fits metal parts by filing, scraping, grinding lapping etc. as necessary and ensures their desired accuracy by checking with precision measuring instruments shadow graph and other highly perfect devices. Assembles parts to form complete unit. Gets electrical components repaired by Electrician. Fits electrical and optical parts to instrument and adjusts them as required. Texts repaired or assembled instrument for clarity or vision sensitivity, correct meter and scale readings etc. as required and ensures stipulated performance within prescribed limits. Makes necessary adjustments and seals meters to avoid manipulations. May specialize in particular type of instruments like balance, pressure gauges, meters, the odolites etc. May make new instruments from blue prints.

Functional Tester; is responsible for checking functions of manufactured industrial equipment such as UPS, inverter, energy meter, PLC, oscilloscope, control panel. The individual at work tests specified functions of every product being assembled on the production line.

During the two-year duration of Lift and Escalator Mechanic trade a candidate is trained on professional skill, professional knowledge, Engineering Drawing, Workshop Calculation & Science and Employability skill. In addition to this a candidate is entrusted to undertake project work and extracurricular activities to build up confidence. The broad components covered related to the trade are categorized in four semesters each of six months duration. The semester wise course coverage is categorized as below: -

1 st Semester - In this semester the trainee learns about safety and environment, use of fire extinguishers and artificial respiratory resuscitation. He gets the idea of trade tools & its standardization, identifies different types of conductors, cables & their skinning, joint making, soldering and crimping. He practices on allied trades like carpentry and fitting work. Basic electrical laws like Kirchhoff͛s law, ohm͛s law, laws of resistances and their application in different combinations of electrical circuit are practiced along with laws of magnetism. The trainee practices on testing and maintenance of batteries. The trainee works with different types of analog and digital measuring instruments. He also gets the basic idea of electronic components.

2 nd Semester - In this semester the trainee practices on basic civil/ drafting work. He uses lifting tools like hoist, pulley, chain block and carries out simple welding. He learns about panel wiring and fitment of various components. Basic function of Transformers and its testing is covered. The trainee practices on AC/DC machines, their starting, running, speed control, reversal of rotation and basic maintenance. He learns connection and operation of lift motor through VVVF drive, different parts of AC/DC drives, terminals of AC/DC drives. The trainee learns about power electronic devices viz., SCR, DIAC, TRAIC, UJT, FET, JFET, MOSFET etc., practices on D/A and A/C converters and controllers.

3 rd Semester - In this semester the trainee learns about safety practice to be adhered while working in elevators and escalators. He understands the working of Elevators, Escalators and Moving walkways. The trainee practices on installation/ fixing of all the component/ parts, control and safety circuits of Elevators. He understands installation process of lifts, types of elevator well, car bottom clearance, landing zone, top over travel, overhead clearance, observe running clearance. The trainee understands constructions and parts of escalators and moving walkways. He practices on various calculations like alighting areas, pit area etc. Practices on fixing of different mechanical parts, control and electrical equipment.

4 th Semester - In this semester the trainee learns and practices on installation of various electrical and electronic control devices, safety devices, control panels, limit switches and power wiring, etc. He carries out various checks, testing/ tuning of components, examine safety devices of lifts, escalators and moving walkways and ensures safe operation. The trainee practices on repairing/ replacement of electrical and electronic components, servicing of various mechanical parts, draining out and refilling of grease and oils, etc. He also gets familiarize with auto rescue device.

ITI trade Mechanic (Motor Vehicle) is powered by NCVT.  ITI trade Mechanic (Motor Vehicle)  is a job oriented trade ITI trade Mechanic (Motor Vehicle) is suitable for government job and private job. This ITI trade Mechanic (Motor Vehicle) is very powerful for self-empowerment. This ITI trade Mechanic (Motor Vehicle) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Installs, tests, maintains, repairs and replaces electrical Power distribution/power line equipments and fittings in factories, workshops, power house, business and residential premises etc. Manipulates controls to adjust and activate those equipments. Monitors and records control board/room readings, examines faults in control room and repairs substation equipments and panels to ensure proper operational efficiency.   
Mechanic Motor Vehicle (MMV) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

• Motor Vehicle Mechanics, Other 
• Mechanic, Automobile 
• Maintenance Technician – Service 
• Workshop 
• Auto Service Technician – Mechanic 
• Fitter Automobile
   

ITI trade Mechanic (Tractor) is powered by NCVT.  ITI trade Mechanic (Tractor)  is a job oriented trade ITI trade Mechanic (Tractor) is suitable for government job and private job. This ITI trade Mechanic (Tractor) is very powerful for self-empowerment. This ITI trade Mechanic (Tractor) is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The trainee attending the course on ‘Mechanic Tractor’ shall be able to perform basic fitting , grinding, surface finishing, sheet metal, bending, and welding operations and carry out electrical/electronic, nondestructive, and battery tests, in an tractor workshop. The trainee shall be able to service cooling and lubrication systems, intake and exhaust systems, and fuel feed system, of the tractor. The trainee shall also be able to overhaul diesel engine, clutch and gearbox, differential and PTO Unit, steering system, assemblies of power tiller, implements, and charging and starting systems, of the tractor. 
Mechanic Tractor repairs and overhauls tractors by various mechanical processes for agriculture, constructional and other heavy duties

ITI trade Mechanic Auto Body Painting is powered by NCVT.  ITI trade Mechanic Auto Body Painting  is a job oriented trade ITI trade Mechanic Auto Body Painting is suitable for government job and private job. This ITI trade Mechanic Auto Body Painting is very powerful for self-empowerment. This ITI trade Mechanic Auto Body Painting is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Mechanic Auto Body Painting applies decorative or protective materials such as paint, enamel or lacquer including synthetic paint on articles of wood, metal etc., using spray painting equipment 
On successful completion of this course the
candidates shall be gainfully employed as:
1. Mechanic Auto Body Painting in Authorized workshops of Automotive industries.
2. Self Employment

ITI trade Mechanic Auto Electrical and Electronics is powered by NCVT.  ITI trade Mechanic Auto Electrical and Electronics  is a job oriented trade ITI trade Mechanic Auto Electrical and Electronics is suitable for government job and private job. This ITI trade Mechanic Auto Electrical and Electronics is very powerful for self-empowerment. This ITI trade Mechanic Auto Electrical and Electronics is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

After successful completion of the above course, the trainee shall be able to perform the following skills with proper sequence.

Installs, repairs replaces and overhauls wiring, starters, generators, distributors and other electrical equipment of motor vehicles.

• Examines vehicle battery, checks voltage and specific gravity using special equipment such as voltmeter hydrometer, heavy discharge tester, etc. and ensures that battery is in good condition.
• Checks vehicle wiring, locates faults and rectifies defects by replacing damaged wire or connecting ends with insulation tape.
• Starts engine to check whether alternator is charging correctly, and if distributor, condenser coil and cut out are functioning properly.
• Estimates nature of defects and reports components to be replaced or repaired.
• Dismantles and repairs electrical units and components such s generator, distributor etc. where required.
• Replaces repaired kit or unit in vehicle and connects it with battery.
• Conducts thorough examination of various electrical fittings such as lights, panel indicators, fuel pumps, etc and rectifies defects.
• Checks condition and makes necessary adjustments. May do armature winding. May drive vehicles on road. May charge batteries.
• Fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use.
• Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; Installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment;
• Dismantles equipment if required and replaces faulty parts or wiring

ITI trade Mechanic Computer Hardware is powered by NCVT.  ITI trade Mechanic Computer Hardware  is a job oriented trade ITI trade Mechanic Computer Hardware is suitable for government job and private job. This ITI trade Mechanic Computer Hardware is very powerful for self-empowerment. This ITI trade Mechanic Computer Hardware is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

ITI trade Mechanic Consumer Electronics Appliances is powered by NCVT.  ITI trade Mechanic Consumer Electronics Appliances  is a job oriented trade ITI trade Mechanic Consumer Electronics Appliances is suitable for government job and private job. This ITI trade Mechanic Consumer Electronics Appliances is very powerful for self-empowerment. This ITI trade Mechanic Consumer Electronics Appliances is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

The Mechanic Consumer Electronic Appliances trade under CTS is one of the popular newly designed courses. The earlier course was Mechanic Consumer Electronics. The course is of two years (04 semester) duration. It mainly consists of trade (skills and knowledge) and Core area (Workshop Calculation & Science, Engineering Drawing and Employability Skills). After passing out of the training program, the trainee is awarded National Trade Certificate (NTC) by NCVT which is recognized worldwide.

Brief description of job roles:

Electronics Fitter, General fits, assembles and repairs various kinds of electronic equipment in factory or workshop or at place of use. Examines drawings and wiring diagrams; checks parts for accuracy of fit and minor adjustments; assembles parts or mounts them on chassis or panels with aid of hand tools; installs and connects wiring, soldering joints equipment, diagnoses faults with aid of electronic testing equipment; dismantles equipment if required and replaces faulty parts or wiring.

Electronics Fitter, other include all other workers engaged in fitting, assembling, repairing and maintaining electronic equipment, machinery, appliances, etc., not elsewhere classified.

Electronics Mechanic; Electronic Equipment Mechanic repairs electronic equipment, such as computers, industrial controls, transmitters, and telemetering control systems following blueprints and manufacturer's specifications and using hand tools and test instruments. Tests faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. Tests electronic components and circuits to locate defects, using instruments, such as oscilloscopes, signal generators, ammeters and voltmeters. Replaces defective components and wiring and adjusts mechanical parts, using hand tools and soldering iron. Aligns, adjusts and calibrates testing instruments. Maintains records of repairs, calibrations and test.

Solar Panel Installation Technician is also known as ‘Panel Installer’, the Solar Panel Installation Technician is responsible for installing solar panels at the customers’ premises. The individual at work checks the installation site, understands the layout requirement as per design, assesses precautionary measures to be taken, installs the solar panel as per customer’s requirement and ensures effective functioning of the system post installation.

Optical Fibre Technician is responsible for maintaining uptime and quality of the network segment (both optical media and equipment) assigned to him by undertaking periodic preventive maintenance activities and ensuring effective fault management in case of fault occurrence. He is also required to coordinate activities for installation and commissioning of Optical Fibre Cable (OF) as per the route plan.

Field Technician: UPS and Inverter is also called, ‘UPS Repair Technician’, this is an after sales service job for installing and providing support to customers of different types of UPS and inverters. The individual at work installs the newly purchased UPS or inverter. The individual also and interacts with customers to diagnose problems in them, assesses possible causes, rectifies faults or replaces faulty modules or recommends factory repairs for bigger faults as per the route plan. Installation, service, repair and overhaul radio sets service centre. May install television sets.

Cable Television Installer installs cable television cables and equipment on customer's premises, using electrician's tools and test equipment: Measures television signal strength at utility pole, using electronic test equipment. Computes impedance of wire from pole to house to determine additional resistance needed for reducing signal to desired level. Installs terminal boxes and strings lead-in wires, using electrician's tools. Connects television set to cable system and evaluates incoming signal. Adjusts and repairs cable system to ensure optimum reception. May collect installation fees and explain cable service operation to subscriber. May clean and maintain tools, test equipment.

Television Repair Technician job role is applicable to both Television manufacturing facilities as well as electronics service centres. This role pertains to rectifying faults identified during testing of TV on in manufacturing process and providing after sales assistance and ensuring appropriate functioning of television sets. A TV repair technician identifies the section in the TV that is not functioning. If the problem identified is in the Printed Circuit Board (PCB), the technician identifies the specific fault in the PCB and corrects it. Replaces the dysfunctional PCB with a new one, if the damage identified requires fixing at the service centre.

DTH Set-Top Box Installer and Service Technician installs set-top boxes and provides after sales service for Direct to Home (DTH) system. The individual at work installs the set-top box at customers’ premises; addresses the field serviceable complaints and co-ordinates with the technical team for activation of new connections

Field Technician, Washing Machine is also, called ‘Washing Machine Repair Technician’. This job is about providing after sales service to customers. The individual at work installs the washing machine, interacts with customers to diagnose the problem and assesses possible causes of fault reported. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.

Field Technician, Other Home Appliances is also called, ‘Home Appliance Repair Technician’, this is an after sales service job for installing and providing support to the water purifier, mixer/grinder buyers. The individual at work installs the appliance and interacts with customers to diagnose the problem and possible causes. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.

Access Controls Installation Technician: Also called ‘Access Control Device Installer’, the Access Control Installation Technician provides after sale support services for access control devices and systems such as point of sale scanners, finger print or iris scan. The individual at work is responsible for installing the access control system at the customer’s premises. The individual undertakes site assessment, installs the hardware and integrates the system to meet customer’s requirement.

Field Engineer TV is also called, ‘Service Engineer – TV’, the TV Field Engineer provides installation and after sales service to buyers of TV and other consumer electronic products such as home theatre system, DVD and Blu-ray players, audio systems, headphones etc. The individual at work interacts with customers to install the entertainment system and diagnose any problems to assess possible causes of malfunction. Once the problem and causes have been identified, the individual rectifies minor problems or replaces faulty modules for failed parts or recommends factory repairs for bigger faults.

Plan and organize assigned work and detect & resolve issues during execution. Demonstrate possible solutions and agree tasks within the team. Communicate with required clarity and understand technical English. Sensitive to environment, self-learning and productivity.

ITI trade Mechanic Diesel is powered by NCVT.  ITI trade Mechanic Diesel  is a job oriented trade ITI trade Mechanic Diesel is suitable for government job and private job. This ITI trade Mechanic Diesel is very powerful for self-empowerment. This ITI trade Mechanic Diesel is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

Repairs, services and overhauls diesel or oil engines for efficient performance as prime mover to drive different machineries and equipments. Examines engine by dismantling it for locating defects and for necessary repair/replacement and then reassemble it ensuring accuracy of fittings and performance as per specified standards. Checks, adjusts and lubricates engine periodically and performs such other functions to keep engine in good working order. 

On successful completion of this course the candidates shall be gainfully employed as:

• 1. Mechanic of Diesel Engine, Oil Engine in Automobile Industries
• 2. Fitter of diesel or oil engines
• 3. Self-Employment
• 4. Instructor of Diesel Mechanic after doing CITS course under NCVT

Mechanic Diesel has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

• Mechanic
• Diesel Engine.

During the one-year duration a candidate is trained on subjects Professional Skill, Professional Knowledge, Engineering Drawing, Workshop Calculation Science and Employability Skills related to job role. In addition to this a candidate is entrusted to make/do project work and extra-curricular activities to build up confidence. The practical skills are imparted in simple to complex manner & simultaneously theory subject is taught in the same fashion to apply cognitive knowledge while executing task. The broad components covered under Professional Skill subject are as below:-

The contents covered are from safety aspect related to the trade, basic fitting operations viz., making, filing, sawing, chiseling, drilling, tapping, grinding to an accuracy of ±0.25mm. Making different components such as Mirrors (glass mirror, furniture mirror, concave mirror, convex mirror etc.), Painting of glass, Polishing of Glass, and Periscope etc. within required accuracy. The practical training, it starts with operation of Lens Format cutting machine, Lens Grinding machine Opto lab. Followed by different operation such as Curve generation, Grinding, Smoothing, Polishing & Hand Polishing, Centering &Edging, Cementing of lenses, Fusion of Lenses, Anti reflection coatings to manufacture spectacles Lenses, Prism and other flat surfaces etc. within required accuracy. Further surface finish of optical components and for Inspection of various parameters of Lens use of optical instruments and devices such as Telescope, Microscope, Binoculars, Periscope, Range Finder, Theodolites. Night Vision devices, Lensometer, Auto Refractometer, Slit lamp, Lens tray, Lens frame, optical refraction unit, Phoropter, Retinoscope and idea about optical aberrations etc.

During the two-year duration of Mechanic Mining Machinery trade, a candidate is trained on subjects- Professional Skill, Professional Knowledge, Engineering Drawing, Workshop Science & Calculation and Employability Skills related to job role. In addition to this, a candidate is entrusted to make/do project work and Extra Curricular Activities to build up confidence. The practical skills are imparted in simple to complex manner & simultaneously theory subject is taught in the same fashion to apply cognitive knowledge while executing task.

The content broadly covers fitting of different components by operating different hand tools conventional machines and maintenance of machineries used in Mining. The broad components covered under Professional Skill subject are as below:

FIRST YEAR:

In this year, the contents covered are from safety aspect related to the trade, basic fitting operations viz., making, filing, sawing, chiseling, drilling, tapping, grinding. Making different fits viz., sliding, T-fit and square fit with an accuracy of ±0.2mm & angular tolerance of 1 . Lathe operation on different shaped job and produce components by different turning operation including thread cutting and relevant job on Shaper and Milling Machine. Also, preventive maintenance of pumps and compressors.

This year starts with practice on construction of SI engine Followed by maintenance and overhauling practice of different types of engines and their parts. Next, practice on measurement of voltage, current, power factor and other components of electrical circuits. Practical on Construction of transformer and test of transformers and rectifier circuits.

SECOND YEAR:

In this year, overhauling of different types of pumps and motors are covered in the beginning followed by stator and rotor winding of induction motors, practice on different circuit breakers and relays. Basic practice on hydraulic and pneumatic parts and circuit making. Practice on assembly of tyre and inspection of puncture. Next, practice on operation and maintenance of different machines used in mining like crawler, hydraulic shovel, walking dragline, wagon drill, blast hole drill, jack hammer, tractor dozer, wheel loader, dumper etc

The trainees will practice on operation and maintenance of Motor Grader and surface miner is covered in the beginning. In addition to this, practice on maintenance of cutting drum picks and other maintenance activities of machines working in mines. Next, practice on maintenance of conveyor belt, air compressor, hydraulic hoist and lubrication system. Also practical on overhauling of gear box, brake system and lighting system and wiper system of vehicles carried out. And practice on maintenance of different mining machineries along with measurement of insulation resistance, illumination and localization of cable fault.

ITI trade Mechanic R AC is powered by NCVT.  ITI trade Mechanic R AC  is a job oriented trade ITI trade Mechanic R AC is suitable for government job and private job. This ITI trade Mechanic R AC is very powerful for self-empowerment. This ITI trade Mechanic R AC is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.

 Mechanic Refrigeration and Air Conditioning installs and repairs refrigeration or air conditioning plant by replacing defective parts, re-seating valves, insulting, soldering etc. Conducts vacuum and pressure test of pipe lines and sets plant to desired cooling conditions maintaining proper safety measures.   

Mechanic Refrigeration & Air Conditioning has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

Domestic Refrigeration and Air Conditioning 
Commercial Refrigeration and Air conditioning 
Mechanic, Refrigeration & Air Conditioning
 

During the one-year duration of “Mechanic Two &Three-Wheeler” trade, a candidate is trained on Professional Skill, Professional Knowledge and Employability Skill related to job role. In addition to this, a candidate is entrusted to undertake project work, extracurricular activities and on-the-job training to build up confidence. The broad components covered under Professional Skill subject are as below: -

During one year duration the trainees learn about safety aspect in general and specific to the trade, identification of tools & equipment, raw materials used. The trainee will perform Measuring & marking by using various Measuring & Marking tools. The trainee will be able to plan and perform basic fastening and fitting operations. Familiarize with basics of electricity, test and measure the electrical parameter. Practice on maintenance of batteries. Practice making various welding joints by using Arc and gas welding. The candidate will practice on dismantling Engine of Two and Three-Wheeler as per given standard procedures. Able to achieve skill on Overhauling of Cylinder Head, valve train, Piston, connecting rod assembly, crankshaft, flywheel and mounting flanges, spigot and bearings, camshaft etc. practice reassembling all parts of engine in correct sequence as per workshop manual. Perform troubleshooting of Excessive smoke, knocking or abnormal noise etc. Practice servicing of Fuel Tank and its components, repair and overhaul Steering and suspension system of three wheelers. The trainee will overhaul brake system, transmission system and LPG/CNG fuel system of Two and three wheelers. Perform servicing and maintenance.